Wholesale · Nursery · USA

Irrigation built for production growing.

ML Irrigation is a wholesale supplier of drip, micro, filtration, and control equipment for greenhouse operations, production nurseries, and educational growing programs — stocked from the industry's leading manufacturers, on the nursery side of the line.

Browse Manufacturer Catalogs ↓ See What We Supply

50+

Years supplying production growers

9,000+

SKUs stocked — including hard-to-find parts

20+

Manufacturer lines stocked and supported

Nursery

Authorized nursery dealer — not landscape

Who We Serve

Systems for growers who run on water.

We stock and spec for production growers and educational programs alike — the volume, the uptime, and the uniformity a crop depends on.

01 / Covered

Greenhouse Operations

Bench, bed, and hanging-basket irrigation with the filtration, injection, and zone control that propagation, growing-on, and finishing crops demand — engineered for uniform delivery across every house.

02 / Yard

Production Nurseries

Container yards, field stock, and pot-in-pot — drip rings, spray stakes, micro-sprinklers, and mainline built to water thousands of plants evenly, block after block, sourced wholesale so your material cost pencils out.

03 / Campus

Education & Research

Teaching greenhouses, university and college horticulture programs, research trials, and FFA / vo-ag facilities — dependable, easy-to-run irrigation and controls that stand up to hands-on student use and give repeatable results.

What We Supply

The full irrigation stack, wholesale.

Everything from the water source to the plant. If it moves, treats, filters, meters or delivers water on a growing operation — or sprays, fogs and waters by hand — we carry it or can source it.

PMP

Pumps & Pump Control

Centrifugal and self-priming pumps, plus constant-pressure control valves that hold pressure steady instead of letting the pump cycle.

FLT

Filtration

Screen, disc, media and automatic self-cleaning filters, sized to your flow and your water rather than to a catalogue number.

CHL

Chlorination & Water Treatment

Chlorination and sanitiser dosing to keep biofilm and algae out of the lines — injection equipment, and help working out rate and contact time.

PIP

Pipe, Hose & Fittings

Poly tubing, oval hose and lay-flat, Schedule 40 and 80 PVC, and the compression, insert and barbed fittings that tie it all together.

VLV

Valves, Vents & Regulators

Solenoid and hydraulic control valves, pressure reducing and sustaining, air and vacuum relief, and preset pressure regulators.

CTL

Controllers & Automation

AC and battery-powered controllers from single-valve timers to cloud-managed multi-zone systems, plus water meters and sensors.

DRP

Drip Line & Drip Tape

Pressure-compensating and non-PC dripline and thin-wall tape, in the wall thicknesses and emitter spacings that suit the crop.

EMT

Emitters & Spray Stakes

Button and PC drippers, spray stakes, multi-outlet assemblies and hanging basket assemblies for container and pot production.

MIC

Micro-Sprinklers & Foggers

Micro-sprinklers, jets, misters and foggers for propagation, overhead and under-canopy work, and for cooling and humidity.

SPK

Impact Sprinklers & Wobblers

Plastic and brass impact sprinklers and off-centre wobblers for open ground, can yards and frost protection.

FRT

Fertigation & Injection

Proportional injectors, dosing pumps, venturi systems and manifolds to put nutrients and chemistry through the system accurately.

SPR

Spray, Fogging & Greenhouse Equipment

Cold foggers, backpack and cart sprayers, water breakers and hand-watering gear, bench and tubing support, punches, tools and spares.

In the Yard & Under Glass

Built for how you actually grow.

From the container pad to the pot-in-pot field to the propagation house — here's where our equipment goes to work, and the products behind each one.

Container drip

Drip over container mums

Pressure-compensating dripline and spray stakes put even water in every pot — no washouts, no dry edges — across the whole pad.

Field nursery

Pot-in-pot tree production

Buried socket pots fed by sub-surface mainline and individual drip assemblies keep field-grown trees watered right through the season.

Under glass

Overhead in the greenhouse

Micro-sprinklers and foggers on overhead lines — filtered and pressure-regulated — for propagation benches and finishing crops.

Product Finder

Search products across every line.

Drip tape and dripline are listed separately — browse either one to compare the models our manufacturers offer, side by side, with the specs that matter. More categories are added as we build out the catalog.

⌕

16 drip tapes · 29 driplines · 9 poly tubing products · 5 oval hoses · 7 layflats · 20 plastic impact sprinklers · 27 metal impact sprinklers · 19 fertilizer injectors · 3 wobblers · 25 misters & foggers · 78 micro-sprinklers · 58 spray stakes & emitters · 49 accessories · 2 hanging basket assemblies · 4 multi-outlet drippers · 16 pressure reducing valves · 17 pressure regulators · 13 pressure sustaining valves · 37 AC solenoid valves · 17 DC latching solenoid valves · 17 air vents · 40 watering tools · 39 hose, PVC & fittings · 74 chemical application products · 104 AC controllers · 24 specialized tools · 33 bench & tubing support parts · 30 DC controllers · 7 pumps · 52 filters · 14 water meters · 6 chlorination products · 36 wire & cable products · 27 manufacturers

Netafim

MegaNet 15D / 24D

Plastic impact sprinkler

Flow: 0.88, 1.10, 1.54, 1.98, 2.42, 2.86 & 3.30 gpm (7 colour-coded nozzles)
Pressure: 29–45 psi at the sprinkler head
Connection: 1/2" male threaded
Trajectory: High 24° (24D) or low 15° (15D)
Throw diameter: up to 40 ft wetted diameter
Best for: Two equal water jets keep it perfectly balanced — no wobble. Closed compact body blocks insect penetration; each unit has its own filter. High angle for open-field nurseries, vegetables, germination, frost protection and orchard cooling; low angle for shade/net houses and under-tree. Filtration: none needed on clean water, 40 mesh on surface water, hydrocyclone on sandy well water. Optional MegaStand connects leak-free to FlexNet

Catalog ↗

Series 80 Nylon (Pressure Reducing)

Pressure reducing

Pressure: 7–150 psi; spring ranges 7–30 psi (yellow), 14–65 psi (green), 30–90 psi (red); max water 140°F
Connection: Nylon threaded; all pilots and solenoids assemble on the bonnet — no tubes run to the valve body
Sizes: 1½" & 2" — globe or angle
Best for: Pressure regulation for small blocks, greenhouse and nursery including hydroponic and mist systems. Three colour-coded spring ranges cover 7 to 90 psi. Clog-free labyrinth inlet for the command water makes it usable on dirty water. Quick to react and seals drip-tight. Order codes PRTH, or PRELTH for the pressure reducing electric version

Catalog ↗

Series 75 Nylon (Pressure Reducing)

Pressure reducing

Pressure: 5–145 psi (low-pressure diaphragm), 10–145 psi (high-pressure diaphragm); max water 140°F
Connection: Threaded; reinforced nylon body and bonnet, natural rubber diaphragm, SST 302 spring
Sizes: 3/4", 1", 1½", 2", 3" threaded — Cv 26 to 110; max flow 9–75 gpm
Best for: Field crops, vineyards, orchards and greenhouses. One moving part — the diaphragm — and it sits out of the water passage, so there is very little to foul or service. Flexible diaphragm over a hydrodynamic body gives high flow at low head loss. Highly resistant to fertilizers and chemicals; polypropylene body and ALD or EPDM diaphragm available for aggressive chemistry

Catalog ↗

Series 90 PVC (Pressure Reducing)

Pressure reducing

Pressure: Max 145 psi; minimum operating 4 psi; minimum recommended flow 5 gpm
Connection: uPVC body; slip or threaded, for PVC networks
Sizes: 3", 4", 6" — threaded or slip
Best for: Purpose-built for PVC mainlines — solvent-weld it straight into the run. Available with the full selection of control functions and an optional underground configuration

Catalog ↗

Series 80 Nylon (Pressure Sustaining)

Pressure sustaining

Pressure: 7–150 psi; spring ranges 7–30 psi (yellow), 14–65 psi (green), 30–90 psi (red); max water 140°F
Connection: Nylon threaded; all pilots and solenoids assemble on the bonnet — no tubes run to the valve body
Sizes: 1½" & 2" — globe or angle
Best for: Holds minimum upstream pressure so priority zones stay fed, in the same drip-tight quick-reacting Series 80 body. Three colour-coded spring ranges from 7 to 90 psi. Order codes PSTH, or PSELTH for the pressure sustaining electric version

Catalog ↗

Series 75 Nylon (Pressure Sustaining)

Pressure sustaining

Pressure: 5–145 psi (low-pressure diaphragm), 10–145 psi (high-pressure diaphragm); max water 140°F
Sizes: 3/4", 1", 1½", 2", 3" threaded
Best for: The Series 75 nylon body ordered in its pressure-sustaining configuration — holds minimum upstream pressure so higher or more distant zones do not starve. Same one-moving-part design and chemical resistance as the reducing version

Catalog ↗

PSNO Valve — PVC

Pressure sustaining

Sizes: 3", 4", 6" and larger
Best for: Pressure Sustaining Normally Open — it sits open and only throttles when upstream pressure falls, which is exactly what a filter station needs. Holds enough pressure through a backflush that the flush actually cleans the screen, so cycles are shorter, filters come back faster and less water goes down the drain. Set the pilot to the sustaining pressure you want (e.g. 45 psi)

Catalog ↗

Series 80 Nylon 2-Way Electric

AC solenoid valve

Flow: 3/4" 0.01–26 gpm · 1" 0.01–44 gpm · 1½" 0.25–110 gpm · 2" 0.25–176 gpm
Pressure: 7–150 psi; max water 140°F
Connection: Nylon threaded; glass-reinforced polyamide body, bonnet and diaphragm seat, SST 304 fasteners, SST 302 spring. 24 VDC, 12 VDC, 12 VDC latching or 120 VAC
Sizes: 3/4", 1", 1½", 2" — 3/4" and 1" globe; 1½" and 2" globe or angle
Best for: The small greenhouse and nursery valve — the 3/4" opens at a hundredth of a gallon a minute, so it will run a mist or hydroponic zone that a bigger valve cannot see. Exceptionally low inrush and holding current gives the longest wire run from valve to controller. No-diode solenoid, stable against voltage fluctuation and insensitive to dirt. Integrated check valve on 1½" and 2" keeps the valve shut until the controller calls for it. Optimal vertically. Flow-control stem gives manual control from full closure to full capacity

Catalog ↗

Electric PBI Throttling Valve

AC solenoid valve

Pressure: Max working pressure 115 psi on the 1", 150 psi on 2"–323; max water 140°F
Connection: Female threaded NPT; glass-reinforced nylon body and bonnet
Sizes: 1", 1½", 2" and 323
Best for: Solenoid is built into the valve rather than bolted on, and it comes standard with a flow-control throttling handle — so one unit does on/off and flow balancing. Low power draw at 29 mA inrush. Models 61ET1PBI-BC (1"), 61ET1.5PBI2-BC (1½"), 61ET2PBI2-BC (2")

Catalog ↗

Series 75 Nylon (Electric)

AC solenoid valve

Pressure: 5–145 psi; max water 140°F
Sizes: 3/4", 1", 1½", 2", 3" threaded — Cv 26 to 110
Best for: The Series 75 nylon body in its electric configuration. Add pressure reducing or sustaining control on the same valve if the zone needs it

Catalog ↗

Series 90 PVC (Electric)

AC solenoid valve

Pressure: Max 145 psi; minimum operating 4 psi
Sizes: 3", 4", 6" — slip or threaded
Best for: Electric PVC slip valve for PVC mainlines, with an optional underground configuration

Catalog ↗

Series 80 Nylon (12 VDC latching)

DC latching solenoid valve

Flow: 3/4" 0.01–26 gpm · 1" 0.01–44 gpm · 1½" 0.25–110 gpm · 2" 0.25–176 gpm
Pressure: 7–150 psi; max water 140°F
Connection: 12 VDC latching solenoid; pairs with the Aqua Pro single-zone controller, which mounts on the valve and runs off one 9 VDC battery
Sizes: 3/4", 1", 1½", 2" — 3/4" and 1" globe; 1½" and 2" globe or angle
Best for: Series 80 with the latching solenoid — automatic operation with no wiring cost at all. The Aqua Pro controller bolts to each valve and is programmed individually, so you can automate one bench or one hoop house without running a single wire. Ideal for seasonal crops where the system gets moved

Catalog ↗

Battery Operated Control Valve

DC latching solenoid valve

Connection: 3-way valves take a 12 VDC Aquative latching solenoid; 2-way valves a 12 VDC latching solenoid
Sizes: Available on any Netafim nylon, PVC, iron or bronze valve body
Best for: Automation where power or wiring is not available or not worth the cost. The battery-operated Aqua Pro single-valve controller runs the whole thing off one 9 V battery. Corrosion-proof components and a water-resistant controller, indoor or outdoor. Retrofits an existing manual system, and you can still add pressure reducing or any other control function on the same valve. Good fit for seasonal crops where the system moves

Catalog ↗

Pressure Regulators

Pressure regulator

Flow: 0.25–175 gpm across the range
Pressure: Preset outlet 9, 12, 15, 20, 25, 30, 35, 43, 50, 57 or 65 psi; max operating 145 psi
Connection: Threaded; non-corrosive plastic and brass, stainless steel spring, EPDM rubber diaphragm
Sizes: 3/4" low flow · 1½" female x male threaded · 2" male threaded (x4 and x6) · 3" female threaded (x10)
Best for: Instant response to pressure variation — outlet pressure stays constant whatever the inlet does. A built-in operating indicator shows at a glance when the regulator has reached its proper outlet pressure, so you can walk a house and see which zones are right without a gauge. The one-piece sealed regulating unit is different for each pressure and is field replaceable, so a pressure change or a worn unit does not mean a new regulator. Withstands the fertilizers and chemicals in common use

Catalog ↗

3/4" Low Flow Pressure Regulator

Pressure regulator

Pressure: Preset outlet 15, 20, 25, 35 or 42 psi; max operating 145 psi
Connection: Female x female threaded; silicon diaphragm
Sizes: 3/4" — inline female x female threaded
Best for: An improved in-line unit sealed to regulate accurately down at low flows, where a standard regulator drifts. Silicon diaphragm prevents leakage. The sealed unit is non-replaceable and there is no operating indicator — the trade for accuracy at low flow

Catalog ↗

Combination Air Vents

Air vent

Pressure: 3/4" & 1" Automatic 250 psi · 1" & 2" Nylon Combination 150 psi or 250 psi; stays open until air pressure reaches 12 psi
Sizes: 3/4" & 1" Automatic · 1" & 2" Nylon Combination
Best for: More air release capacity than other vents of the same size. Air release, vacuum release and continuous action in one body, so a single fitting protects the line on fill, on shutdown and during operation. Aerodynamic float closes the vent as water fills the system

Catalog ↗

Guardian Air Vents

Air vent

Pressure: 150 psi on every size; closes at 5 psi on 3/4" and 1", 10 psi on 2", 8 psi on 3"
Sizes: 3/4", 1", 2", 3"
Best for: The size range runs to 3", so one family covers a lateral and a submain. Closing pressure is published per size, which matters when you are matching a vent to a low-pressure drip zone

Catalog ↗

Dynamic Air Vent

Air vent

Pressure: Maximum operating 150 psi
Connection: Male NPT; reinforced nylon body
Sizes: 2" & 3" NPT male threaded
Best for: A diaphragm gives controlled air intake and discharge rather than a float slamming shut. It sits normally closed when the line is not running, so debris and contaminants cannot get into the pipeline through the vent — worth having where the vent is at ground level in a dusty yard

Catalog ↗

Streamline X

Drip tape

Diameter: 0.638" (630 Series) & 0.875" (875 Series)
Wall: 5, 6, 8, 10 mil (630) · ReGen EZ, 6, 8, 10 mil (875)
Emitter spacing: 8"–30"
Flow: 0.07, 0.16, 0.24, 0.36 gph @ 10 psi
Pressure: 13–20 psi max operating (flush 19.5–30 psi), by series and wall
Pressure comp.: No · PC version: DripNet PC Thinwall
Best for: Row crops & vegetables

Catalog ↗

Typhoon Plus

Drip tape

Diameter: 0.638", 0.875", 0.990", 1.125", 1.375" (638–1 3/8 Series)
Wall: 8, 10, 13, 15 mil (by series)
Emitter spacing: 8", 10", 12", 14", 16", 18", 20", 24" & 27"
Flow: 0.11, 0.16, 0.22, 0.36, 0.49 gph @ 10 psi
Pressure: 12–32 psi max operating (flush 17.4–47.9 psi), by series and wall
Pressure comp.: No · PC version: DripNet PC Thinwall
Best for: Row crops; surface or subsurface (SDI)

Catalog ↗

DripNet PC Thinwall

Dripline

Diameter: 0.636", 0.875" & 0.990" ID
Wall: 15–25 mil
Emitter spacing: 8"–30"
Flow: 0.16, 0.26, 0.32 & 0.42 gph
Pressure: 6–36 psi
Pressure comp.: Yes · Non-PC version: Streamline X or Typhoon Plus
Best for: Long runs & hilly terrain; subsurface, multi-season

Catalog ↗

DripNet PC Heavywall

Dripline

Diameter: 16–20 mm & 0.820"
Wall: 45–60 mil
Emitter spacing: 24"–48"
Flow: 0.16–0.92 gph
Pressure: PC (~7–58 psi)
Pressure comp.: Yes · Non-PC version: Aries
Best for: Trees, vines & row crops; greenhouse & nursery; slopes

Catalog ↗

UniRam

Dripline

Diameter: 16–20 mm & 0.820"
Wall: 45–60 mil
Emitter spacing: 18"–60"
Flow: 0.26–1.00 gph
Pressure: 7–58 psi
Pressure comp.: Yes (self-flushing) · Non-PC version: Aries
Best for: Orchards & vineyards; SDI; poor water quality

Catalog ↗

Space-It

Drip tape

Diameter: 0.638" (0.636" ID)
Wall: 8 mil
Emitter spacing: 12", 14", 16", 18", 20", 24"
Flow: 0.2 gph (12" spacing); 0.4 gph (14"–24")
Pressure: 12 psi max
Pressure comp.: No · PC version: DripNet PC Thinwall
Coil lengths: 9,000'
Best for: Watering potted plants — each dripper visibly marked on the tubing so pots line up under it; nursery & greenhouse containers. Custom flow rates, wall thicknesses and dripper spacings available from Netafim on a minimum order

Catalog ↗

Aries Heavywall

Dripline

Diameter: 0.540", 0.620", 0.690", 0.820"
Wall: 45–60 mil
Emitter spacing: 18"–60"
Flow: 0.26–1.00 gph
Pressure: 10–30 psi
Pressure comp.: No · PC version: UniRam or DripNet PC Heavywall
Best for: Deciduous & tree crops, multi-season on-surface row crops, vineyards; harsh water (TurbuNext labyrinth)

Catalog ↗

Aries Thinwall

Dripline

Diameter: 0.638", 0.875", 0.990", 1.125", 1.375" (638–1 3/8 Series)
Wall: 13 & 15 mil
Emitter spacing: 12", 14", 16", 18", 20", 24", 27", 30" & 36"
Flow: 0.11, 0.18, 0.21, 0.30, 0.41, 0.62 gph @ 10 psi
Pressure: 17–32 psi max operating (flush 26–42 psi), by series and wall
Pressure comp.: No · PC version: DripNet PC Thinwall
Best for: Multi-season row crops and orchards on flat ground; TurbuNext labyrinth gives a wide filtration area for poor water. 80 mesh filtration

Catalog ↗

Streamline X EZ

Drip tape

Diameter: 0.875"
Wall: ReGen recycled-content wall
Emitter spacing: 6", 8", 10"
Flow: 0.16, 0.24, 0.36 gph
Pressure comp.: No · PC version: DripNet PC Thinwall
Best for: Single-season vegetable row crops; surface or shallow burial to 2"; lower retrieval cost & food-safety compliance

Catalog ↗

Black Polyethylene (PE) Tubing

Poly tubing

Diameter: 0.400"–1.060" ID (0.490"–1.200" OD)
Wall: .045"–.070"
Pressure: 46–75 psi (by size)
Coil lengths: 250', 500' & 1,000'
Sizes: 12 diameters, 10.2×12.5 mm to 26.9×30.5 mm
Best for: General-purpose laterals, manifolds and submains across the nursery and greenhouse

Catalog ↗

Bright White Polyethylene (PE) Tubing

Poly tubing

Diameter: 0.520", 0.600", 0.700", 0.820", 1.060" ID (0.620"–1.200" OD)
Wall: .050"–.070"
Pressure: 44–66 psi (by size)
Coil lengths: 100', 500' & 1,000'
Sizes: 5 diameters, 13.2×15.8 mm to 26.9×30.5 mm
Best for: Greenhouse benches and propagation — opaque white resists algae, withstands heat and chemicals, and runs cooler than black

Catalog ↗

Oval Tube

Oval hose

Diameter: 1.365"–3.996" ID (1.461"–4.186" OD)
Pressure: 21, 29 & 42 psi grades
Coil lengths: 130'–600' depending on size and grade
Sizes: 1.25", 1.50", 2.00", 2.50", 3.00", 4.00"
Best for: Submain and water transfer, and retrievable row-crop systems. Unlike vinyl layflat it takes standard dripperline connectors. 7-year warranty on 42 psi, 2-year on 21/29 psi

Catalog ↗

FlexNet Flexible Pipe

Layflat

Diameter: 2", 3", 4", 6" & 8" (10" by special request)
Pressure: 36.2 psi (2") · 29 psi (3") · 25 psi (4") · 20 psi (6") · 14.5 psi (8")
Coil lengths: 328' (100 m)
Sizes: Outlet spacing 30", 36", 40", 60", 72" or 80"
Best for: Leak-proof alternative to vinyl layflat for mainline and manifold. Integral welded 1/2" female-threaded outlets, 100% recyclable polypropylene, can be driven over when unpressurised; saves 20–30% on labour vs layflat

Catalog ↗

FertiOne Plus

Fertilizer injector

Flow: 2 dosing channels up to 158 gph
Pressure: up to 80 psi mainline
Best for: Two venturi dosing channels with visual flow meters and adjustable needle valves; schedule 80 PVC

Catalog ↗

FertiKit 3G

Fertilizer injector

Best for: Venturi suction of fertiliser and acid into dosing channels, pressure differential from the FertiKit booster pump. Seven models including two without a booster; schedule 80 PVC on a corrosion-resistant aluminum frame

Catalog ↗

NetaFlex 3G

Fertilizer injector

Flow: 13–282 gpm system flow
Pressure: 29–100 psi
Best for: Multi-channel dosing for larger operations

Catalog ↗

SpinNet

Micro-sprinkler

Flow: 11.7, 18.4 & 23.4 gph average at 32 psi (greenhouse models); 13–53 gph across the full range
Pressure: 30 psi average working pressure
Throw diameter: designed on 3 ft sprinkler spacing, 2–7 ft above crop
Best for: Drip-less operation — the check valve stops the line draining onto plants below at shutdown. Mist-control body and spinner are colour-coded (R-R-BL, BR-BR-BL, R-R-GY, BR-Y-GY, R-R-GN, BR-BR-GN). Seven flow rates, meets ISO 8026

Catalog ↗

CoolNet Pro

Mister & fogger

Flow: 8.1 gph (4-nozzle assembly, model 0303420LL-B); single nozzles 1.5, 2.0 & 3.7 gph
Pressure: 30 psi average working pressure
Best for: Best nozzle for propagation — creates a zone of saturated humidity ideal for rooting. 65 micron average droplet. Low-pressure check valve

Catalog ↗

VibroNet

Mister & fogger

Flow: 9.2 gph (green nozzle) at 32 psi; blue nozzle for light mist
Pressure: 30 psi average working pressure
Throw diameter: 3 ft sprinkler spacing on 4–5 ft benches, 2–5 ft above crop
Best for: Light mist over larger areas — bench and single-bay watering. Blue or green nozzle with check valve (VN-BL / VN-GN)

Catalog ↗

SuperNet

Micro-sprinkler

Flow: Swivel 5.3–23.8 gph · Jet 7.9–23.8 gph
Pressure: 25–50 psi recommended
Connection: Quick-Connect thread (standard) or barb (special order)
Throw diameter: Swivel 5.0–23.0 ft · Jet 11.2–20.3 ft
Sizes: Swivel LR / MR / SR and LRD / MRD / SRD with breakaway stream deflector; Jet 360°, 300°, 2×120° butterfly and 180° patterns
Best for: Orchard, vineyard and nursery where flow regulation and insect resistance matter. Floating self-flushing diaphragm holds flow uniform across a wide pressure range; largest water passages on the market resist clogging; drop-down bug-proof swivel/jet plate keeps insects out. Everspin sapphire bearing for wear-free rotation. 80 mesh filtration. Hangs from trellis wire or mounts on a stake

Catalog ↗

Hanging Assembly (0300HSAC)

Hanging basket assembly

Connection: Barb x barb or barb x female connector to PE pipe
Sizes: 12", 18", 24", 30", 36" & 48" tube lengths (plus 48" extension)
Best for: Drops a sprinkler, mister or fogger head to hanging baskets. Super Flex UV White 4/7 mm tubing with stabiliser weight

Catalog ↗

Flat 4-Way Multi-Outlet Dripper Assembly

Multi-outlet dripper (MODS)

Flow: WPC Jr. dripper 2.11 gph
Sizes: Tube lengths 18", 24", 30" & 36" — standard (4 equal) or short (2 + 2 staggered)
Best for: One pressure-compensating dripper feeding four pots. Models 014DM-1818F / 1830F / 2424F / 2436F / 3030F, and FS short variants. Supplied with Super Flex UV White PE tubing

Catalog ↗

Multi-Outlet Dripper Assembly Components

Multi-outlet dripper (MODS)

Best for: Replacement drippers, arrow drippers, tubing and stakes to build or repair multi-outlet assemblies

Catalog ↗

Woodpecker PC Junior with CNL (WPCJ)

Spray stakes & emitters

Flow: 0.53 gph (red), 1.06 gph (grey), 2.11 gph (green) — colour-coded on base and body
Pressure: Recommended operating range 10.2–58 psi; shut-off (closing) pressure 1.7 psi, about 3.9 ft of head
Pressure comp.: Yes — with CNL anti-drain
Best for: The smaller Woodpecker. It starts compensating lower than the full-size WPC-CNL — 10.2 psi against 14.5 — and seals at a lower head, 3.9 ft against 5 ft, so it suits shallower slopes and lower-pressure systems where the larger dripper would not close cleanly

Catalog ↗

Woodpecker PC (WPC)

Spray stakes & emitters

Flow: 0.53 gph (red), 1.06 gph (black), 2.25 gph (green) — colour-coded on the base
Pressure: Recommended operating range 7–58 psi — the widest compensation range in the line
Pressure comp.: Yes · Non-PC version: Woodpecker Dripper (WP)
Best for: Holds a uniform flow rate from 7 to 58 psi, so the first and last plant on a long or sloping run get the same water. Suits vineyards and orchards where the lateral covers real elevation. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.

Catalog ↗

Scan-Kleen Screen Filter

Filtration

Best for: Netafim’s screen filter for greenhouse and nursery heads

Catalog ↗

2" Compact LP Disc-Kleen

Filtration

Sizes: 2"
Best for: Compact disc filter built for low-pressure systems — spray stake and drip blocks that do not have the head to drive a conventional filter

Catalog ↗

Alphapollo Disc Filter

Filtration

Best for: Disc filtration for greenhouse and nursery systems

Catalog ↗

Manual Disc Filters

Filtration

Best for: Manual disc filtration where an automatic flush is not warranted

Catalog ↗

GrowSphere MAX

AC Controller

Connection: Up to 4 main lines, 4 main valves and 4 main water meters; 10 irrigation programs per main line (40 total), 32 shifts per program, 32 valves per shift
Sizes: Three builds — without screen, with screen, and double-door with screen; modular configuration
Best for: Runs water and fertiliser together rather than as two systems — pumps, main valves, field valves and other hydraulics, local or remote. Built-in setting validation catches a bad program before it runs, and it blocks non-logical hydraulic commands. Smart alerts, secure remote access, and it ties into the Netafim cloud workspace. Industry-standard electrical components inside, so a local electrician can service it

Catalog ↗

GrowSphere ONE

DC Controller

Connection: Rechargeable 3.7 V 5200 mAh li-ion, optional 5.5 W solar panel with 5 m extension, or external supply; IP65 with UV protection, CE and FCC
Sizes: 3 analog inputs, 1 serial input, 2 digital inputs; three solar options — integrated, external or none
Best for: Stand-alone monitoring unit that reads soil moisture, plant, pressure and flow sensors and sends the data up continuously. Ships with a global SIM so it sets up in the field without a network job. Feeds the GrowSphere workspace and Crop Advisor crop models

Catalog ↗

GrowSphere OS

AC Controller

Best for: The software layer over the controllers — one dashboard for planning, execution and validation across the whole farm by crop. Alerts, reporting, monitoring and control in one workspace, with offline or remote operation and features you add as you grow. Prevents fertiliser overuse and non-logical hydraulic commands, and keeps traceability records

Catalog ↗

GrowSphere Crop Advisor

AC Controller

Best for: Turns the sensor data GrowSphere ONE collects into irrigation recommendations using Netafim crop models, rather than leaving the grower to interpret raw graphs

Catalog ↗

GrowSphere Monitoring

AC Controller

Best for: Real-time irrigation status across the farm from a phone or desktop, with alert notifications when something is out of range

Catalog ↗

M Series Water Meters

Water meter

Pressure: ±2% accuracy across a wide flow range
Connection: MPE digital register, pulse outputs 10 or 3.26
Best for: Multi-jet principle spreads the load evenly around the impeller, which cuts wear and keeps the meter accurate for longer. Netafim call these the industry’s smallest water meters

Catalog ↗

WMR Series Water Meters

Water meter

Pressure: ±2% accuracy across a wide flow range
Best for: In-line axial turbine lets foreign matter pass straight through instead of jamming the meter — the right choice on surface or reclaimed water that carries debris

Catalog ↗

WST Series Water Meters

Water meter

Connection: Reed switch pulse outputs 10 / 32.6 / 100 on 3"–8", 100 or 325.9 on 10"–12"; photo diode outputs 0.1172–0.378 on 3"–8", 4.505 or 6.73 on 10"–12"
Sizes: 3", 4", 6", 8", 10" and 12"
Best for: Built-in straightening vanes on 3"–8" cut the run of straight pipe you need either side — 5 diameters upstream and 2 down, instead of the usual 10. That matters in a pump house where there is no room

Catalog ↗

Octave Ultrasonic Water Meter

Water meter

Flow: Under 1 gpm to 5,500 gpm
Pressure: ±1.5% accuracy, certificate supplied with each meter
Best for: Double-beam ultrasonic sensing with no moving parts to wear or foul, and the widest flow span in the range. Each meter carries a unique unalterable bar-coded serial number and ships with its own flow-accuracy certificate — which is what a water authority will ask for

Catalog ↗

Fertilizer Meters

Water meter

Pressure: ±2% accuracy
Best for: Corrosion-resistant and light enough to mount on an injection line. The magnetically driven register is sealed and guaranteed not to fog or take up moisture — the usual failure on a meter sitting in a fertigation shed

Catalog ↗

AlphaDisc Disc Filter

Filtration

Best for: Netafim’s automatic disc filter for the main line, above the compact greenhouse units

Catalog ↗

SandStorm Media Filters

Filtration

Best for: Media filtration for surface water with an algae or organic load that would blind a screen

Catalog ↗

SandStorm Double Chamber

Filtration

Best for: Double-chamber build so one chamber backwashes while the other keeps filtering — supply never stops mid-cycle

Catalog ↗

ScreenGuard

Filtration

Best for: Automatic self-cleaning screen filter for mainline protection

Catalog ↗

ScreenGuard2

Filtration

Best for: The second-generation ScreenGuard automatic screen filter

Catalog ↗

Backflush Controllers

Filtration

Best for: Sequences the backflush across a filter bank — the part that makes an automatic filter station actually automatic

Catalog ↗

Pro Air Vent

Air vent

Best for: The fifth vent in the Netafim range, alongside the Combination, Guardian and Dynamic

Catalog ↗

Q-Flex Riser

Bench & tubing support

Best for: Flexible riser that takes a knock from equipment and springs back instead of snapping off at the saddle — the usual repair in a nursery aisle

Catalog ↗

NetJet

Micro-sprinkler

Best for: Netafim’s micro-jet, alongside the SpinNet spinner and the SuperNet range

Catalog ↗

SuperNet Jr

Micro-sprinkler

Best for: The smaller SuperNet, for tighter spacings and lower flows than the standard head

Catalog ↗

Woodpecker PC with CNL (WPC-CNL)

Spray stakes & emitters

Flow: 0.53 gph (red), 1.06 gph (black), 2.25 gph (green)
Pressure: Recommended operating range 14.5–58 psi; shut-off (closing) pressure 2.17 psi, about 5 ft of head
Pressure comp.: Yes — with CNL anti-drain · Without anti-drain: Woodpecker PC (WPC)
Best for: The CNL mechanism seals the dripper once pressure drops below about 5 ft of head, so the lateral does not empty itself downhill between cycles. That stops the low end of a slope being drowned every time the system shuts off, and the next cycle starts instantly instead of refilling

Catalog ↗

Woodpecker Dripper (WP)

Spray stakes & emitters

Flow: 0.5 gph (red), 1.0 gph (black), 2.0 gph (green) — colour-coded on the base
Pressure: Recommended filtration 120 mesh
Pressure comp.: No · PC version: Woodpecker PC (WPC)
Connection: Barbed inlet for easier installation; barbed outlet accepts micro-tubing
Sizes: Flow path 1.96" long — 0.028 x 0.038" at 0.5 gph, 0.047 x 0.050" at 1.0 gph, 0.055 x 0.065" at 2.0 gph
Best for: The barbed outlet takes micro-tubing, so one dripper can be run out to where the plant actually is and split to several outlets if needed. Barbed inlet pushes straight into the lateral. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.

Catalog ↗

Button Dripper (BD)

Spray stakes & emitters

Flow: 0.5 gph (red), 1.0 gph (black), 2.0 gph (green) — colour-coded at the outlet hole
Pressure: Recommended filtration 120 mesh
Pressure comp.: No
Connection: Barbed inlet
Sizes: Flow path 1.96" long — same three flow paths as the Woodpecker
Best for: The plain button form of the same Turbonet dripper — drips straight from the outlet hole rather than taking micro-tubing. Cheaper per point where the emitter sits right at the plant. Turbonet flow path gives the dripper an unusually large water passage — the industry’s widest flow path and a wider cross-section — so contaminants pass straight through instead of lodging. The tooth pattern maximises velocity along a short path, which is what keeps it from silting up.

Catalog ↗

PCJ On-Line Dripper

Spray stakes & emitters

Pressure comp.: Yes
Best for: Netafim’s PCJ punch-in dripper, holding flow steady along the lateral regardless of pressure. Available in CNL anti-drain form for sloping ground

Catalog ↗

PC Spray Stakes

Spray stakes & emitters

Flow: 3.2, 6.6, 7.9 and 10.6 gph — colour-coded by flow
Pressure: Pressure compensating up to 60 psi
Pressure comp.: Yes · Non-PC version: Spray Stakes
Sizes: Every flow available as a 7" stake or a 12-gauge metal rod mount; single or double spray
Best for: Built for the nursery grower, and the reason is the spray pattern — it angles downward just enough to keep water on the mix instead of over the rim. Water that hits the pot wall runs down the side and straight out the bottom without wetting anything. Even distribution also activates top-dressed fertiliser uniformly. PC holds the flow steady to 60 psi, so long rows and sloping ground stay even. Single spray suits a stake at the pot edge; double wets more of the mix from the centre

Catalog ↗

Spray Stakes (Non-PC)

Spray stakes & emitters

Flow: 3, 5 and 7 gph — colour-coded (5 gph green, 7 gph black)
Pressure comp.: No · PC version: PC Spray Stakes
Sizes: Single or double spray
Best for: The economical spray stake where pressure across the block is already steady. Pattern is shaped to the pot so water and fertiliser land on the mix with no overspray or run-off. Netafim put the payback plainly: hand watering a plant three seconds a day costs about $0.25 a month, so the system pays for itself before the plant is sold — and converting overhead sprinklers to low-pressure spray stakes saves over two-thirds of pumping cost. Lower flows run longer rows: 3 gph reaches 215 ft on 0.520" pipe against 145 ft for 7 gph

Catalog ↗

Series 100 Iron (Pressure Reducing)

Pressure reducing

Pressure: Max water temperature 176°F — the highest in the Netafim valve range
Connection: Cast iron (ASTM A126 CLB); threaded, flanged or grooved
Sizes: 1", 1½", 2", 3", 4", 6", 8", 10", 12" — threaded, flanged, grooved or angle
Best for: Straight flow pattern with the lowest friction loss in the industry, per Netafim. The size range runs well past the plastics — up to 12" — so this is the mainline and pump-shed valve. Also offered manual and electric

Catalog ↗

PSNO Valve — Iron

Pressure sustaining

Sizes: 3", 4", 6", 8", 10", 12"
Best for: The iron PSNO for larger filter stations and mainlines — same normally-open sustaining function as the PVC version, in the sizes plastics do not reach

Catalog ↗

Quick Relief (QR) Valves

Pressure sustaining

Pressure: Typically set to open 10 psi above the working pressure
Sizes: 2", 3", 4", 6", 8" — iron with threaded, flanged or grooved connection; bronze also available
Best for: Surge protection for the whole system. It sits fully closed while pressure is within range, then opens fast the instant pressure spikes — on pump start-up, on a sudden valve closure, or on a power cut. Netafim call it the universal solution for protecting a system, and it is the cheapest insurance against a split mainline

Catalog ↗

Rain Bird

2045-PJ (Maxi-Bird)

Plastic impact sprinkler

Flow: 1.5–8.4 gpm
Pressure: 25–60 psi
Connection: 1/2" male NPT, plastic bearing
Trajectory: 23° standard, 10° low-angle available
Radius: 22–45 ft
Best for: Rain Bird calls it a workhorse for nursery use — greenhouse, nursery, can yards and climate control. Delrin plastic, trip collars adjust 20°–360°, patented Precision-Jet S-tube stops side splash, five colour-coded Quick Fit nozzles. Good grit and chemical resistance for dirty water

Catalog ↗

GritX PC Heavywall

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–50 mil
Emitter spacing: 18"–60" standard (6"–96" custom)
Flow: 0.26–1.06 gph
Pressure: 7–60 psi
Pressure comp.: Yes · Rain Bird ag dripline is PC only
Best for: On-surface permanent crops, orchards & vineyards; poor water

Catalog ↗

GritX SDI

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–48 mil
Emitter spacing: 6"–96" patterns
Flow: 0.46 gph (1.7 l/h)
Pressure: 15–60 psi
Pressure comp.: Yes (+ Copper Shield) · Rain Bird ag dripline is PC only
Best for: Subsurface drip for tree crops & vineyard

Catalog ↗

GritX DSV

Dripline

Diameter: 16 / 18 / 20 mm
Wall: 35–48 mil
Emitter spacing: 6"–96" patterns
Flow: 0.46 gph (1.7 l/h)
Pressure: 15–60 psi
Pressure comp.: Yes (anti-drain/anti-siphon) · Rain Bird ag dripline is PC only
Best for: Tree crops & vines needing backflow prevention

Catalog ↗

Micro Bird Jet

Micro-sprinkler

Flow: 3.7–37.5 gph (14–142 l/h)
Pressure: 10–30 psi (0.7–2.1 bar)
Connection: 5 mm or 1/4" tubing barb
Throw diameter: 3–33 ft (0.9–10.1 m)
Sizes: Snap-fit nozzles MBJ05 (.026"), MBJ08 (.033") and up; 8 deflector patterns
Best for: Snap-fit nozzles and deflectors assemble and clean without tools. Reversible dual-pattern deflector flips to change the wetted area as the crop matures. 150-mesh filtration recommended. Ships factory-assembled or as loose components

Catalog ↗

LFX / LF Series Low Flow Sprinklers

Micro-sprinkler

Flow: 0.28–2.12 gpm (62–469 l/h)
Pressure: 25–50 psi (1.72–3.45 bar)
Connection: ACME or 1/2" MNPT
Radius: 18–31 ft (5.5–9.4 m) — LFX300 18–25 ft, LFX600 22–31 ft
Best for: Rain Curtain technology for even distribution and gentle close-in watering that will not wash out media. Snap-fit brake assemblies and nozzles change without tools. Optional flow-control (FC) nozzles hold output steady as pressure varies — LFX300 at 0.35 / 0.43 / 0.50 gpm, LFX600 at 0.75 / 1.00 gpm. Snap-on edge guard and stream splitters available

Catalog ↗

ESP-LXME2 / ESP-LXME2 PRO

AC Controller

Best for: Modular commercial controller with a large display and a hand/off/auto dial. Non-volatile memory keeps the schedule and a lithium coin cell holds time and date through an outage, so a power cut does not cost you the programme. English and Spanish

Catalog ↗

TBOS-BT Series

DC Controller

Connection: One 9 V alkaline battery, type 6AM6 / 6LR61
Sizes: 1, 2, 4 and 6 stations — TBOS-BT (mobile app or handheld transmitter) and TBOS-BT-LT (app only)
Best for: Buriable battery controller programmed over Bluetooth from a phone, for zones with no power. Eight models across the two ranges

Catalog ↗

TBOS-II Series

DC Controller

Connection: One 9 V alkaline battery, type 6AM6 / 6LR61; roughly one year of life
Best for: The original buriable battery line, for automating awkward areas where AC power is not available

Catalog ↗

XFD On-Surface Dripline

Dripline

Pressure comp.: Yes
Best for: Rain Bird call it the most flexible pressure-compensating inline emitter tubing made — it lies into ground cover, dense plantings and hedge rows without fighting the curve. The low-profile emitter cuts in-line pressure loss, so laterals run longer

Catalog ↗

XFS Subsurface Dripline

Dripline

Pressure comp.: Yes
Best for: Copper Shield technology stops roots growing into the emitters without harsh chemicals or treated filters — the usual failure mode for buried dripline

Catalog ↗

XFS-CV Subsurface Dripline

Dripline

Pressure: 4.3 psi check valve in every emitter
Pressure comp.: Yes
Best for: Every emitter carries a 4.3 psi check valve, holding the line charged across elevation changes of more than ten feet — Rain Bird say the highest hold-back in the industry. Keeps Copper Shield root protection as well, so a sloping bed does not drain down to the bottom emitters after every cycle

Catalog ↗

Drip Filters, Valves & Pressure Regulators

Filtration

Best for: Rain Bird’s filter, valve and pressure regulator range for low-volume drip zones

Catalog ↗

PRS Pressure Regulating Stems

Pressure regulator

Pressure: Regulates to 30 psi
Sizes: Available in every pop-up height
Best for: The regulator lives inside the spray body stem rather than upstream, so every head is individually regulated to 30 psi — no misting from over-pressure at the near end of a zone

Catalog ↗

ESP-TM2 Series

AC Controller

Connection: 120 V indoor/outdoor; LNK WiFi module compatible
Sizes: 4, 6, 8 and 12 stations
Best for: The practical mid-range Rain Bird controller, indoor or outdoor rated, with Wi-Fi available through the LNK module rather than built in — so the cost only lands if the site wants it

Catalog ↗

ESP-Me3

AC Controller

Connection: LNK2 WiFi compatible
Best for: Modular controller that takes the LNK2 Wi-Fi module for app control and remote scheduling

Catalog ↗

ESP-LXD Decoder Controller

AC Controller

Best for: Rain Bird’s two-wire decoder platform — one cable path with decoders at the valves, for large or awkward sites where home-run wiring is impractical

Catalog ↗

ESP-LXIVM Series

AC Controller

Connection: LNK2 WiFi compatible
Best for: Decoder controller built around integrated valve modules, with the diagnostics to find a fault on the two-wire path rather than digging to look for it

Catalog ↗

ESP-BAT-BT

DC Controller

Best for: Battery controller programmed over Bluetooth, for valves with no power available

Catalog ↗

LNK2 WiFi Module

AC Controller

Connection: Fits ESP-Me, ESP-ME3, ESP-TM2, RZXe, ESP-LXME2 and ESP-LXIVM
Best for: Adds Wi-Fi and app control to a controller already installed — six model families supported, so an existing site can go remote without new hardware in the cabinet

Catalog ↗

14VH

Metal impact sprinkler

Flow: 0.56–2.68 gpm
Pressure: 20–60 psi
Connection: 1/2" male NPT
Trajectory: 23°
Radius: 29–38 ft
Best for: Low pressure and low flow where grit is abundant — patented self-flushing nylon "V" wedge is replaceable, extending arm life

Catalog ↗

20JH

Metal impact sprinkler

Flow: 2.0–5.47 gpm
Pressure: 35–60 psi
Radius: 38–44 ft
Best for: General solid set; brass straight-bore nozzle

Catalog ↗

30H / 30WH

Metal impact sprinkler

Flow: 2.9–13.1 gpm
Pressure: 25–80 psi
Radius: 40–56 ft
Best for: Wide operating range; 30H with spreader, 30WH plugged

Catalog ↗

30FH / 30FWH

Metal impact sprinkler

Flow: 2.26–6.47 gpm
Pressure: 25–80 psi
Radius: 39–43 ft
Best for: Tighter pattern than the 30H; 30FH with spreader, 30FWH plugged

Catalog ↗

65PJ

Metal impact sprinkler

Flow: 12.9–16.5 gpm
Pressure: 50–80 psi
Radius: 57–65 ft
Best for: Higher pressure solid set needing long throw

Catalog ↗

85EHD

Metal impact sprinkler

Flow: 17.1–127.7 gpm
Pressure: 25–100 psi
Radius: 61–116 ft
Best for: Largest throw in the Rain Bird ag range — widest spacings and frost protection

Catalog ↗

25BPJ-FP

Metal impact sprinkler

Flow: 3.1–5.0 gpm
Pressure: 30–50 psi
Radius: 38–41 ft
Best for: Part-circle brass precision jet for field edges and headlands

Catalog ↗

35A-TNT / 35A-ADJ

Metal impact sprinkler

Flow: 3.9–7.8 gpm
Pressure: 30–60 psi
Radius: 42–51 ft
Best for: Part-circle brass spoon drive; TNT washer stack or adjustable-nozzle version

Catalog ↗

Rivulis

5035 SD

Plastic impact sprinkler

Flow: 3.10–12.71 gpm
Pressure: 35–70 psi
Connection: 3/4" male
Throw diameter: 80–111 ft
Sizes: Single nozzle or dual nozzle; #18 (9/64", 3.5 mm) and larger, colour-coded bayonet
Best for: General field use on solid-set systems. Unique hammer with the SD super-diffuser plate holds uniform distribution on single or dual nozzles at spacings up to 65 ft, and the impact drive handles wind. Colour-coded bayonet nozzle with an integrated stream-straightening vane for maximum range. Full and part circle; a PC version is also listed. Heavy-duty plastic resists corrosion, chemicals and UV

Catalog ↗

5022 SD

Plastic impact sprinkler

Flow: 1.46–5.28 gpm
Pressure: 25–60 psi
Connection: 1/2" sprinkler carrier adaptor for Stand 52/53
Throw diameter: 63–85 ft
Sizes: Single or dual nozzle — #12 (3/32"), #14, #15 and up, colour-coded bayonet
Best for: Irrigation and germination of vegetables, flowers and nursery crops. Hammer plus SD super-diffuser plate gives uniform distribution across a wide spacing range, including good coverage on field boundaries. Reduced clogging sensitivity and high wind resistance; short-cycle friendly for germination. Full and part circle

Catalog ↗

5024 SD

Plastic impact sprinkler

Flow: 1.38–4.30 gpm
Pressure: 22–60 psi
Trajectory: 12° low angle
Throw diameter: 49–75 ft
Sizes: #12 (3/32", 2.5 mm) and up, colour-coded bayonet
Best for: Undertree irrigation in orchards and plantations — table grapes and bananas especially. The 12° low-angle body keeps the stream under the canopy, and it holds uniformity down to 22 psi. Optional anti-theft adaptor. UV and impact resistant

Catalog ↗

5030LT

Plastic impact sprinkler

Flow: 3.7–8.7 gpm (831–1981 l/h)
Pressure: 29–58 psi (2–4 bar)
Connection: 3/4" male threaded inlet
Trajectory: 25°
Throw diameter: 80–97 ft (24.5–29.5 m)
Sizes: Single or dual nozzle — 4.0 mm black, 3.5 mm blue and others
Best for: Cost-focused field sprinkler for pulses, oilseeds, vegetables and cereals, with the Super Diffuser plate for distribution. Springs protected with a cap and ring; heavy-duty spindle and fulcrum pin. Carries a specific one-year limited warranty rather than the standard Rivulis terms

Catalog ↗

501-U

Plastic impact sprinkler

Flow: 0.44–1.10 gpm (100–250 l/h)
Pressure: 22–51 psi (1.5–3.5 bar)
Connection: 1/2" male quick connector, mounted on IrriStand 50
Throw diameter: 39–51 ft (12–15.5 m)
Sizes: 1.6 mm red and 1.8 mm green nozzles
Best for: Turbo-hammer low-volume sprinkler for vegetables — leafy greens especially — and greenhouses, at spacings up to 26 ft (8 m). Fine droplets for delicate crops; corrosion-resistant metal parts and easy inspection for maintenance

Catalog ↗

6004 SD

Plastic impact sprinkler

Flow: 2.11–3.59 gpm (480–815 l/h)
Pressure: 29–58 psi (2.0–4.0 bar)
Trajectory: 4° low angle
Throw diameter: 46–59 ft (14–18 m)
Best for: Ground-level precision for orchards and plantations, aimed at table grapes and bananas. The 4° low angle throws a flat stream close to the ground so foliage stays dry, and a special arched water path maximises coverage diameter. Drive mechanism is designed to resist snail damage. UV and impact resistant

Catalog ↗

6024 SD

Plastic impact sprinkler

Flow: 1.56–3.21 gpm (355–730 l/h)
Pressure: 29–44 psi (2.0–3.0 bar)
Trajectory: 12° low angle
Throw diameter: 49–66 ft (15–20 m)
Best for: Under-canopy irrigation in orchards and plantations — table grapes and bananas. Low-angle, low-volume build with the SD super-diffuser plate and an arched water path for maximum coverage. Snail-resistant drive; colour-coded bayonet nozzles. UV resistant

Catalog ↗

6025 SD

Plastic impact sprinkler

Flow: 2.4–5.6 gpm (0.54–1.27 m³/h)
Pressure: 36–58 psi (2.5–4.0 bar)
Connection: 1/2" NPSI female x 3/4" BSPP female adaptor; 3/4" PVC riser for Elite 50 mm
Throw diameter: 62–89 ft (19–27 m)
Sizes: 2.8 mm orange, 3.0 mm red and up, colour-coded bayonet
Best for: Irrigation and germination of vegetables, field crops and flowers on short cycles. Arched water path widens the radius so fewer sprinklers cover the block — spacing 12–16 m. Reduced clogging sensitivity, high wind resistance, and full protection of the spring and axle area

Catalog ↗

427 GAG / 427B AG-U

Plastic impact sprinkler

Flow: 2.00–5.28 gpm
Pressure: 30–60 psi
Connection: 1/2" MPT, mounts on IrriStand 52
Throw diameter: 72–85 ft
Best for: Plastic impact sprinkler in heavy-duty materials resistant to corrosion, chemicals and UV

Catalog ↗

V2000 (Pressure Reducing)

Pressure reducing

Pressure: To 145 psi (10 bar)
Sizes: 1.5"–8" straight; BSP/NPT or flange
Best for: Reduces pressure downstream of the valve to keep every block uniform. Available as a straight pressure reducing valve or as pressure reducing electric, so one valve both regulates and switches

Catalog ↗

V2500 (Pressure Reducing)

Pressure reducing

Pressure: To 145 psi (10 bar)
Sizes: 2"–6" — angle and straight
Best for: Piston-operated plastic pressure reducing valve for finer control of the regulation curve

Catalog ↗

V1000

AC solenoid valve

Connection: BSP/NPT; 2-way internal or 3-way external control circuit; 3W solenoid 24 V AC
Sizes: 1" in-line, 1½" in-line, 2" in-line, 2" angle — blocks to 110 gpm (25 m³/h)
Best for: The economical choice for small farms, landscape and small commercial blocks. Every V1000 has a manual throttling knob for extra control over pressure and flow. Glass-filled nylon body, cover and diaphragm-piston assembly; full-bore seat with an unobstructed flow path for low head loss. The 2-way electric circuit is internal — no external tubes or accessories to fit or break. Also available manual, 9 V DC, hydraulic and pressure reducing

Catalog ↗

V2000 (Electric)

AC solenoid valve

Pressure: To 145 psi (10 bar)
Connection: 3W solenoid, 24 V AC normally closed; BSP/NPT, flange or ISO-16 in-line
Sizes: 1.5"–8" straight; BSP/NPT or flange
Best for: Rivulis’ main plastic agricultural valve, with a unique oval diaphragm design for minimum head loss. Also available manual, pressure reducing, pressure reducing electric and quick relief

Catalog ↗

V2500 (Electric)

AC solenoid valve

Pressure: To 145 psi (10 bar)
Sizes: 2"–6" — angle and straight; threaded, flanged, grooved, Victaulic or solvent weld
Best for: Piston-operated plastic valve where you want maximum control over the throttling curve rather than a diaphragm. Also available manual, pressure reducing and quick relief

Catalog ↗

V1000 (9 V DC latching)

DC latching solenoid valve

Connection: 9 V DC latching solenoid; 2-way internal or 3-way external circuit; BSP/NPT
Sizes: 1" in-line, 1½" in-line, 2" in-line, 2" angle
Best for: The V1000 ordered with a 9 V DC latching solenoid for battery controllers on small farms and landscape jobs where running 24 V wire is not worth it. Keeps the manual throttling knob and the internal 2-way circuit

Catalog ↗

V2000 (9 V DC latching)

DC latching solenoid valve

Pressure: To 145 psi (10 bar)
Connection: 3W 9 V DC latching solenoid
Sizes: 2"L, 3", 3"L, 4", 6" — BSP/NPT or flange
Best for: The V2000 plastic body with a 9 V DC latching solenoid for battery-powered control. Oval diaphragm keeps head loss down

Catalog ↗

Continuous / Automatic Air Release Valves

Air vent

Pressure: Opens from 0.10 bar (1.5 psi); maximum 145 psi (10 bar)
Sizes: 1/2", 3/4", 1"
Best for: Releases air during operation while the line is under pressure, reducing head loss and the flow loss that trapped air causes. Rivulis specify them on long constant-sloping segments, at peaks along the pipeline and relative to the hydraulic gradient, at line ends, before water meters, and on strainers and filters

Catalog ↗

Vacuum Breakers

Air vent

Pressure: Maximum 145 psi (10 bar)
Sizes: 3/4", 1", 2", 3"
Best for: Discharges air at start-up and lets air back in at shutdown so pipes and tubes cannot collapse. Rivulis specify one every 150–250 m on long continuous lines, on gentle peaks where vacuum is not a concern, and on pump filters needing air release

Catalog ↗

Combination Air Valves

Air vent

Pressure: Air and vacuum release from 0.20 bar (2.9 psi); maximum 145 psi (10 bar)
Sizes: 2"
Best for: Vacuum breaker and automatic air valve in one unit — air and vacuum release on start-up and shutdown, plus continuous release during operation. Rivulis specify them downstream of an isolating valve, on submains, on mains where the design calls for an air release/vacuum breaker, and on fertigation check valves

Catalog ↗

F6260 Automatic Plastic Screen Filter

Filtration

Best for: Self-cleaning screen filter in a plastic body, for blocks that do not justify a metal automatic station

Catalog ↗

T-Tape

Drip tape

Diameter: 16–35 mm (5/8"–1-3/8")
Wall: 4–15 mil
Emitter spacing: 4"–30"
Flow: ~0.066–1.06 gph (0.25–4.0 l/h)
Pressure: ~8 psi nominal
Pressure comp.: No · PC dripline alternative: D4000 PC
Best for: Open-field vegetables & row crops; heavier walls for multi-season/SDI

Catalog ↗

Ro-Drip

Drip tape

Diameter: 5/8" (7/8" also)
Wall: 8–15 mil (approx.)
Emitter spacing: 4" (others offered)
Flow: varies (~0.40 gpm/100 ft class)
Pressure: ~8 psi nominal
Pressure comp.: No · PC dripline alternative: D4000 PC
Best for: New-to-drip growers or very poor water (expanding-labyrinth anti-clog)

Catalog ↗

D900

Dripline

Diameter: 16 & 22 mm
Wall: 5–12 mil
Emitter spacing: 10–75 cm (4"–30")
Flow: 0.17, 0.26, 0.37 & 0.58 gph (0.65, 1.0, 1.4, 2.2 l/h)
Pressure: 17 psi max (1.2 bar)
Pressure comp.: No · PC version: D4000 PC
Coil lengths: up to 2,600 m (8,530')
Best for: Single-season crops; engineered for longer run lengths at high uniformity (fewer tractor turns)

Catalog ↗

D1000

Dripline

Diameter: 16 & 22 mm
Wall: 6, 8, 10 & 12 mil
Emitter spacing: 15–50 cm (6"–20")
Flow: 0.17, 0.26 & 0.40 gph (0.64, 1.0, 1.5 l/h)
Pressure: 14.5–17 psi max (1.0–1.2 bar)
Pressure comp.: No · PC version: D4000 PC
Coil lengths: 2,300–3,000 m
Best for: Shallow-burial / subsurface, single-season

Catalog ↗

D2000

Dripline

Diameter: 16 & 17 mm
Wall: 18, 30, 35, 40 & 45 mil
Emitter spacing: 20–100 cm (8"–39")
Flow: 0.40, 0.52 & 0.53 gph (1.5, 1.95, 2.0 l/h)
Pressure: 32–43.5 psi max (2.2–3.0 bar)
Pressure comp.: No · PC version: D5000 PC
Coil lengths: 400–1,100 m
Best for: Medium-heavy-wall runs needing high clog resistance

Catalog ↗

D4000 PC

Dripline

Diameter: 16 & 22 mm
Wall: 8 & 10 mil
Emitter spacing: 12" (example)
Flow: 0.16 & 0.24 gph (0.6, 0.9 l/h)
Pressure: 4.4–21.8 psi (0.3–1.5 bar)
Pressure comp.: Yes · Non-PC version: D1000 or Eolos Classic
Coil lengths: 1,000–2,000 m
Best for: Annual crops on slopes to ~2%; long runs

Catalog ↗

D5000 PC

Dripline

Diameter: 16, 17, 20, 22 & 23 mm
Wall: 13, 15, 35 & 40 mil
Emitter spacing: 15–100 cm (6"–39")
Flow: 5 flow rates to 0.69 gph (2.6 l/h)
Pressure: 26–43.5 psi max (1.8–3.0 bar)
Pressure comp.: Yes · Non-PC version: D2000 or Eolos Classic
Coil lengths: 350–800 m
Best for: Subsurface (SDI), hilly terrain, long runs, orchards

Catalog ↗

Hydro PC / PCND

Dripline

Diameter: 16, 17 & 20 mm
Wall: 35, 45 & 47 mil
Emitter spacing: 8", 12", 16", 20", 24", 30" & 36"
Flow: 0.42 & 0.46 gph
Pressure: 44–51 psi max; PC regulates from 14.5 psi (16 mm) / 10.6 psi (17 mm and above)
Pressure comp.: Yes · Non-PC version: Eolos Classic
Coil lengths: 1,000'
Best for: Orchards, vineyards, greenhouses; PCND enables pulse irrigation

Catalog ↗

Eolos Classic

Dripline

Diameter: 16 mm
Wall: 5–35 mil
Emitter spacing: 15–75 cm (6"–30")
Flow: up to 1.06 gph (4.0 l/h)
Pressure comp.: No · PC version: D4000 PC or D5000 PC
Best for: Single- to multi-season crops; wall-thickness durability tiers

Catalog ↗

AmnonDrip PC / CNL / AS (NaanDanJain)

Dripline

Diameter: 16, 17, 20 & 23 mm
Wall: 25, 35, 40 & 45 mil
Emitter spacing: 20–100 cm
Flow: ~0.29–1.00 gph (1.1–3.8 l/h)
Pressure: 36–51 psi max (2.5–3.5 bar)
Pressure comp.: Yes · Non-PC version: Eolos Classic
Best for: Long laterals / variable terrain; greenhouse, vegetables, orchards; SDI (AS)

Catalog ↗

Rivulis Oval Hose

Oval hose

Diameter: 0.660"–2.743" ID
Wall: .026"–.108"
Pressure: 21 & 42 psi grades
Coil lengths: 250'–3,000'
Sizes: 1/2", 3/4", 1", 1-1/4", 1-1/2" & 2"
Best for: Submain and water transfer; premium PE resin, lays flat for freight and storage

Catalog ↗

H5000 Layflat

Layflat

Diameter: 41, 50, 65, 75, 100, 125, 150 & 200 mm (1-1/4"–8")
Wall: 1.15–2.20 mm
Pressure: 42–71 psi (2.9–4.9 bar)
Coil lengths: 100 m rolls
Best for: PVC layflat submain — H5100 (blue) standard pressure, H5200 (red) high pressure

Catalog ↗

Pro-Flat Layflat

Layflat

Diameter: 1.5", 2", 3", 4", 6" & 8"
Wall: .059"–.090"
Pressure: 45–91 psi max operating (by size)
Coil lengths: 300'
Best for: Heavy-duty layflat with embedded webbing and strong yarn structure; USA & Mexico

Catalog ↗

H6000 PE Layflat

Layflat

Diameter: 75 mm (3"), 100 mm (4") & 150 mm (6")
Wall: 0.95 mm (37.4 mil)
Emitter spacing: Outlet spacing 0.50–2.00 m (19.7"–78.7"); custom spacing available
Pressure: 3" 33 psi plain / 26 psi with outlets · 4" 29 / 22 psi · 6" 20 / 14.5 psi
Coil lengths: 100 m (328 ft) rolls
Best for: Outlets injection-moulded into the layflat — no punching, no leaks at the outlet. Up to 64% lighter than equivalent PVC layflat. Connects to seamless thinwall laterals up to 25 mil wall

Catalog ↗

H6500 PE Layflat

Layflat

Diameter: 75 mm (3") & 100 mm (4")
Wall: 1.2 mm (47.2 mil) on 3"; 1.42 mm (51.2 mil) on 4"
Emitter spacing: Outlet spacing 0.508–1.524 m (20"–60"); custom spacing available
Pressure: 3" 33 psi plain / 26 psi with outlets · 4" 29 / 22 psi
Coil lengths: 100 m (328 ft) rolls
Best for: As H6000 but seamless construction and works with standard fittings. Up to 60% lighter than equivalent PVC layflat. Connects to seamless thinwall laterals up to 25 mil wall

Catalog ↗

Automated Fertigation Injection Systems

Fertilizer injector

Best for: Accurate nutrient delivery with pH control. Rivulis range runs from basic venturi injection through to fully automated systems

Catalog ↗

Super Green Spin

Micro-sprinkler

Flow: 11.4–42.3 gph at 29 psi
Pressure: 30–45 psi
Connection: Tapered or bayonet; fits PE and PVC pipe
Throw diameter: 24.6–31.2 ft (tested 6 ft above ground)
Sizes: 5 colour-coded nozzles — brown 11.4, grey 18.5, green 27.7, orange 31.7, black 42.3 gph
Best for: Bridgeless no-drip inverted micro-sprinkler for overhead greenhouse irrigation. Sand protection plate and sand release slots resist clogging; improved bearing and swivel for wear resistance. Optional Super LPD leakage prevention device. Filtration 120 mesh on brown and grey nozzles, 70 mesh on green, orange and black

Catalog ↗

Rondo / RFR

Micro-sprinkler

Flow: Rondo 7.9–78.7 gph (30–298 l/h); RFR 6.1–25.1 gph (23–95 l/h)
Pressure: Rondo 22–36 psi (1.5–2.5 bar); RFR 22–51 psi (1.5–3.5 bar)
Pressure comp.: Yes on the RFR version · Non-PC version: Rondo
Connection: 3/8" threaded, or 5 mm thread inlet option
Throw diameter: 19–36 ft (5.8–11.0 m) at 29 psi
Best for: Rotating micro-sprinkler for field and protected crops, also run inverted. RFR is the pressure-compensating build for undulating ground and long laterals. Filtration steps with flow: 120 mesh to 40 l/h, 80 mesh 40–70 l/h, 60 mesh above 70 l/h

Catalog ↗

AquaMaster 2005

Micro-sprinkler

Flow: 8–96 gph
Pressure: 20–45 psi
Connection: 3/8" MPT, 1/2" MPT, quick thread, or 4/7 barb
Throw diameter: 18–41 ft
Sizes: 7 colour-coded nozzles, .031"–.076" — violet 9, brown 13, grey 18, green 28, orange 32, black 42, blue 53 gph nominal
Best for: Widely-spaced plantations — walnut, almond, avocado, mango — and overhead irrigation of vegetables and nursery stock. Insect-resistant nozzle and large droplets; inverted version for tunnels and greenhouses. Two-stage swivels available. Filtration 120 mesh on violet and brown nozzles, 70 mesh on the rest

Catalog ↗

AquaSmart 2002

Micro-sprinkler

Flow: 5.3–25.1 gph
Pressure: 20–60 psi
Connection: 4/7 barb, female, or 3/8" MPT quick thread
Throw diameter: 9.5–25 ft
Best for: Steady flow across a wide pressure band for orchards and vineyards on varied topography. Insect-proof nozzle, clog-resistant even at low flow. Spring-loaded inverted bridge option; two-stage swivels give wetted-diameter control — first stage limits diameter for young trees. Optional trunk protector keeps water off the trunk

Catalog ↗

Flipper

Micro-sprinkler

Flow: 6.6–11.4 gph at 29 psi
Pressure: 29–45 psi (35–55 psi for the regulated unit)
Throw diameter: Narrow strip pattern — spacing up to 18, 20 or 32 ft by nozzle, mounted 3 ft above target
Sizes: 3 nozzles — black 6.6, violet 9.3, brown 11.4 gph; flow regulators at 6.6 / 9.3 / 11.4 gph
Best for: Frost protection for vineyards and row orchards. Throws a long narrow strip down the row instead of a circle, saving up to 70% of the water a conventional overhead system uses. Large droplets minimise evaporative cooling at start-up; pathways stay dry for equipment access. 120 mesh filtration

Catalog ↗

Modular

Micro-sprinkler

Flow: 7.7–98.7 gph
Pressure: 25–45 psi
Connection: 4/7 barb, barbed butterfly, spike, or suspended stand with weight
Throw diameter: 4.9–36 ft
Best for: One frame, a full range of heads — full and part circle, with small, medium or large droplets depending on the sprayer, swivel or optional anti-mist device. Spreader available for inverted use. Filtration 120 mesh on purple and brown nozzles, 80 mesh on the rest

Catalog ↗

Hadar 7110

Micro-sprinkler

Flow: 6.1–88 gph (23–333 l/h)
Pressure: 22–44 psi (1.5–3.0 bar)
Connection: Bayonet coupling
Throw diameter: 5.6–36 ft (1.7–11.0 m) at 29 psi
Sizes: 11 colour-coded nozzles, 0.65–2.0 mm; 9 inserts — mist sprayer, small sprayer, extra-range, insect-resistant, half-circle, mini-range rotor, medium-range rotor, extra-range rotor, inverted rotor
Best for: Modular build with bayonet coupling — swap inserts to change the pattern without replacing the head. Covers irrigation, propagation and micro-climate work in orchards, greenhouses, nurseries and landscape. Can be run with a leakage prevention device

Catalog ↗

S2000 / S2000 PC

Micro-sprinkler

Flow: S2000 7.7–79.3 gph (29–300 l/h); S2000 PC 6.3–25.1 gph (24–95 l/h)
Pressure: 22–51 psi (1.5–3.5 bar)
Pressure comp.: Yes on the PC version · Non-PC version: S2000
Connection: Meteor adaptor with cantal stake, or hung from LDPE
Throw diameter: S2000 20–34 ft (6.0–10.5 m); S2000 PC 16–25 ft (5.0–7.5 m), measured 10" above ground
Best for: Take-apart body opens in one click for service. Low trajectory keeps water off the fruit; anti-insect protection standard; wear-resistant movement. PC version holds flow steady on undulating ground and long runs. Snap-off range limiter shrinks the pattern for young trees — break the tab off as they mature

Catalog ↗

Tornado Ray Jet Sprayer

Micro-sprinkler

Flow: 7.1–18.5 gph (26.7–70 l/h) at 22 psi
Pressure: 22–44 psi (1.5–3.0 bar)
Connection: PE 4x7 mm tube with cantad stake, or take-apart body
Throw diameter: 8–14 ft (2.4–4.2 m), upright 10" above ground
Sizes: 4 nozzles — black 0.9, blue 1.3, green 1.7, red 2.0 mm; 360° and 300° patterns
Best for: Fixed jet sprayer for close-in coverage; take-apart version for cleaning. Nozzles listed are for use with a pressure regulator — conic nozzles for non-PC service on request. Filtration 120 mesh to 40 l/h, 80 mesh 40–70 l/h

Catalog ↗

Smart Jet

Micro-sprinkler

Flow: 5.0–20.9 gph
Pressure: 15–40 psi
Pressure comp.: Yes — Smart Jet PC
Connection: 160 barb with 160x220" PE tube, or clip hammer stake 36"
Throw diameter: 10–28 ft depending on pattern (J 16-jet, U 270°, C 210°, A high, A low, S strip)
Sizes: 7 colour-coded nozzles, .033"–.065" — black 5.0, orange 7.4, blue 9.2, violet 12.2, green 14.5, yellow 17.7, red 20.9 gph
Best for: Uniform frame takes any of six jet patterns, so one part number covers the block. PC model holds flow steady and supports longer laterals. Optional Top Hat limits the wetted area on young trees. Strip pattern throws 2.5–4 ft wide. Filtration 120 mesh on black, orange and blue nozzles, 75 mesh on violet, green, yellow and red

Catalog ↗

Super Fogger

Mister & fogger

Flow: Medium pressure 1.5 / 3.0 / 5.5 gph at 40 psi; high pressure 6.5 / 13 / 24 gph at 60 psi
Pressure: Medium (green cover) 40 psi, max 45 psi; high (blue cover) 60 psi
Connection: Multi-connection for PE pipe, or 3/8" thread for PVC
Sizes: 1, 2 or 4 outlets
Best for: Greenhouse cooling, humidification and chemical application. Built-in leakage prevention device — medium-pressure model opens at 45 psi and closes at 20, high-pressure opens at 60 and closes at 35. Droplets average 2.7 mil medium / 2.1 mil high, so foliage stays dry under pulsed operation. Built-in filter. Climate control spacing 5x10 to 10x10 ft; pesticide spraying 5x10 ft; poultry 5–10 ft. 120 mesh filtration

Catalog ↗

FLF Fogger

Mister & fogger

Flow: 1.43 or 2.77 gph per outlet at 51 psi (up to 11.1 gph on the 4-outlet)
Pressure: 51–72.5 psi; seals at 20 psi
Connection: H anti-leak barb x conic female, or conic male x conic female
Sizes: Single, 2-outlet and 4-outlet; light blue 1.43 gph and dark blue 2.77 gph nozzles
Best for: Fine mist averaging 70 microns to drop greenhouse air temperature and raise humidity. Use with a Rivulis anti-leak H high-pressure mini valve to stop drainage at shut-off — fit it in the arrow direction. Recommended build is FLF plus anti-leak valve, microtube and stabilising weight. 100 micron / 150 mesh filtration

Catalog ↗

Fogger

Mister & fogger

Flow: Broad range of nozzle flow rates for different precipitation rates
Pressure: High-pressure Super LPD 60 psi; medium-pressure Super LPD opens 44 psi, closes 22 psi
Connection: PE and PVC connections; T or cross manifold assemblies
Best for: Cooling, humidifying and propagation. Extra-fine 55 micron droplets at 60 psi (69 micron on the medium-pressure LPD at 45 psi). Leakage prevention device gives simultaneous start-up and shut-down across the block. For cooling and humidifying run 4 foggers on a cross or 2 on a T — laterals 9.8–13.5 ft apart, heads 6–10 ft; add pesticide spraying and it is 2 on a T only, laterals 6–10 ft, heads 4–5 ft. 120 mesh filtration

Catalog ↗

Rondo Mist Sprayer

Mister & fogger

Flow: 12.4 gph (black) and 16.1 gph (blue) at 44 psi
Pressure: 36–58 psi
Connection: Ultra Conic inlet; assemblies with anti-leak valve, 12" tube, weight and coupling
Throw diameter: 6.5 ft average wetting diameter
Best for: Seed germination and cutting propagation — 150 micron droplets fall gently over the seed instead of the large drops a conventional spinner throws, in a uniform pattern averaging 6.5 ft. Use the standard anti-leak model below 51 psi and the H model above it. Add a 4x7 mm grommet to the mini valve for insertion into PVC laterals. 80 mesh filtration

Catalog ↗

Green Mist

Mister & fogger

Flow: 7.9–10.6 gph (7.9 at 29 psi, 9.0 at 36, 9.8 at 44, 10.6 at 50)
Pressure: 30–50 psi
Connection: Taper lock female with low-pressure Super LPD 4/7 (black)
Throw diameter: 4 ft
Best for: Misting and irrigation over propagation benches. Droplet size is tuned to stop mist drift, and distribution is symmetrical with no dead corners. Low-pressure LPD gives clean pulsed operation. Mount 3–4 ft above the bench, max 2.5 ft between heads on the lateral, 3 ft between laterals, and keep laterals within 10" of the bench edge. 100 mesh filtration

Catalog ↗

Super LPD

Accessory

Pressure: Low-pressure opens 20 psi / closes 9 psi; medium-pressure opens 44 / closes 22; high-pressure opens 58 / closes 35
Connection: Barb 4/7, female, or 3/8" thread; bayonet x bayonet on the low-pressure model for Super Green Spin
Best for: Anti-drain valve, not an emitter — it stops drainage through the heads at shut-off and holds the system full and pressurised so the next cycle starts instantly. Minimal pressure loss even at high flow, one-stage open-or-shut action, easy-dismantle for cleaning. Three builds: black low-pressure for micro-sprinklers, green medium-pressure and blue high-pressure for foggers. Compatible with all Rivulis micro-sprinklers

Catalog ↗

ClickTif On-Line Dripper

Spray stakes & emitters

Flow: 1.3, 2.0, 3.0, 4.0, 8.0 and 12.0 l/h (0.34–3.2 gph)
Pressure: Minimum recommended working pressure 1 bar (14.5 psi)
Best for: Six flows from one body, with a labyrinth path that resists blocking. Maximum recommended 2.0 l/h per outlet on the 2-outlet build

Catalog ↗

E800 On-Line Dripper

Spray stakes & emitters

Flow: 2.0 l/h brown, 4.0 l/h black, 8.0 l/h green, 14.0 l/h red (0.53–3.7 gph)
Best for: Colour-coded turbulent-flow dripper across four flows, the widest single-outlet range in the Rivulis on-line family

Catalog ↗

E1000 On-Line Dripper

Spray stakes & emitters

Flow: 2 and 4 l/h (0.53 and 1.06 gph)
Best for: The multi-function port takes a barbed outlet, so one dripper can feed a single pot directly or run out to a distribution tube — no separate fitting

Catalog ↗

Katif PC

Spray stakes & emitters

Flow: 2.3 and 3.75 l/h (0.61 and 0.99 gph)
Pressure comp.: Yes
Sizes: Side outlet and top outlet versions
Best for: Compact PC dripper in side-outlet or top-outlet form, so the tube can leave the lateral whichever way the row runs

Catalog ↗

Supertif PC / PCND

Spray stakes & emitters

Pressure comp.: Yes — PCND version also no-drain
Connection: Barbed side outlet (SOL) with conic + barb options
Best for: PC dripper with a barbed side outlet — a Rivulis design that lets the microtube leave sideways rather than off the top, which keeps the assembly low in a tight canopy. The PCND build is also no-drain, so the lateral does not empty between cycles and the next start is instant

Catalog ↗

F6150 Screen Filter

Filtration

Best for: The basic manual screen filter in the Rivulis range — the one that goes in front of a small block

Catalog ↗

F6400 Semi-Automatic Screen Filter

Filtration

Best for: Cleans on demand without opening the housing — a handle instead of a strip-down

Catalog ↗

F3240 / F3240-IQ Automatic Screen Filter

Filtration

Best for: Hydraulically driven self-cleaning screen filter — no electrical supply needed at the filter station, which matters at a remote pump

Catalog ↗

F3340 / F3340 PRO Automatic Screen Filter

Filtration

Best for: Electrically driven automatic screen filter, with a PRO build for heavier duty

Catalog ↗

F3440 Continuous Circulation Screen Filter

Filtration

Best for: Filters continuously through the flush cycle, so downstream supply never drops — the point of a continuous-circulation design

Catalog ↗

F7050 Disc Filter

Filtration

Best for: Disc filtration gives depth rather than surface straining, so it holds organic matter that would blind a screen of the same rating

Catalog ↗

F7250 Automatic Disc Filter

Filtration

Best for: Self-cleaning disc filtration for dirty water where a screen would need constant attention

Catalog ↗

F2300 Media Filter

Filtration

Best for: Sand media filtration for surface water carrying algae and organic load

Catalog ↗

F1300 Hydrocyclone Filter

Filtration

Best for: Spins sand and grit out centrifugally before the main filter sees it — for well water, this is what stops you backflushing all day

Catalog ↗

Lateral Flush Valve

Accessory

Best for: Opens at the start of a cycle to flush the far end of the lateral, then closes once pressure builds — clears the sediment that otherwise settles there and blocks the last emitters on the run

Catalog ↗

Lateral LPD

Accessory

Best for: Holds the lateral charged between cycles so it does not drain down and refill each time — faster start-up and no puddling at the low points

Catalog ↗

PVC Molded Fittings

Hose & fittings

Best for: Rivulis moulded PVC fittings for connecting laterals and submains

Catalog ↗

233B / 234

Metal impact sprinkler

Flow: 3.5–20.3 gpm (0.79–4.60 m³/h)
Pressure: 44–73 psi (3.0–5.0 bar)
Pressure comp.: PC version available (233B PC)
Connection: 3/4" male / female
Radius: 45–70 ft (89–141 ft wetted diameter, 27–43 m)
Sizes: 3.5x2.5L blue, 4.0x2.5L red/black and larger dual nozzles
Best for: Heavy-duty metal overhead sprinkler for precision irrigation at spacings of 12–20 m. Available as 233B or 234, with a pressure-compensating 233B PC

Catalog ↗

423

Metal impact sprinkler

Flow: 2.53–4.13 gpm
Pressure: 30–60 psi
Connection: 1/2" MPT
Trajectory: 27°
Radius: 38–46 ft (76–92 ft wetted diameter)
Best for: Metal impact for field edges, end-of-lateral runs, nurseries and medium to large landscape areas, at spacings up to 45 ft. The WP hammer keeps water inside the pattern so roads and structures stay dry. Sand and dust protection sleeve; diffuser screw, distance control flap and wetting precision arm all fitted. Full or part circle

Catalog ↗

260

Metal impact sprinkler

Flow: 12.8–47.1 gpm (2.9–10.7 m³/h)
Pressure: 22–58 psi (1.5–4.0 bar)
Pressure comp.: PC version available (K1-260 PC)
Connection: 1 1/4" female
Radius: 51–77 ft (102–154 ft wetted diameter, 31–47 m)
Sizes: 8.0 mm, 9.0 mm and larger nozzles
Best for: K1-260 metal impact sprinkler for spacings up to 27 m

Catalog ↗

280

Metal impact sprinkler

Flow: 41.8–221.5 gpm (9.5–50.3 m³/h)
Pressure: 22–87 psi (1.5–6.0 bar)
Pressure comp.: PC version available (Duplex 280 PC)
Radius: 66–150 ft (131–305 ft wetted diameter, 40–93 m)
Sizes: 12.0x8.0, 14.0x8.0 mm and larger dual nozzles
Best for: Duplex 280 big-gun metal impact for spacings up to 50 m

Catalog ↗

V3000 (Pressure Reducing)

Pressure reducing

Pressure: To 145 psi (10 bar); over 6" rated to 232 psi (16 bar)
Sizes: 1"–16" — angle and straight
Best for: The metal pressure reducing valve for mainlines and pump sheds, in sizes and pressure ratings the plastics do not reach

Catalog ↗

V3000 (Pressure Sustaining)

Pressure sustaining

Pressure: To 145 psi (10 bar); over 6" rated to 232 psi (16 bar)
Sizes: 1"–16" — angle and straight
Best for: Sustains minimum upstream pressure so priority zones and elevated blocks stay fed. Also available as a combined PR/PS valve that does both jobs in one body — which saves fitting two valves in series

Catalog ↗

V3500 (Pressure Sustaining)

Pressure sustaining

Sizes: 2"–10" — angle and straight
Best for: Piston valve range for maximum control. Also available manual, electric, pressure reducing and quick relief

Catalog ↗

V3000 (Electric)

AC solenoid valve

Pressure: To 145 psi (10 bar); metal valves over 6" rated to 232 psi (16 bar)
Sizes: 1"–16" — angle and straight
Best for: Patented springless diaphragm design in the valve chamber for reliable, precise operation. The size range and the 16 bar rating over 6" make this the pump-shed and mainline valve. Also available manual, pressure reducing, pressure sustaining, combined PR/PS and quick relief

Catalog ↗

Irritec

Plastic Screen Filters

Filtration

Best for: Light plastic screen filter for a greenhouse head or a small block

Catalog ↗

Plastic Disc Filters

Filtration

Best for: Disc element gives depth filtration, holding organic matter a screen of the same rating would pass or blind on

Catalog ↗

IrritecTape

Drip tape

Diameter: 16 & 22 mm (5/8", 7/8")
Wall: 5–15 mil
Emitter spacing: 4"–12"
Flow: 0.07–0.28 gph @ 8 psi (0.18–1.41 gpm/100 ft)
Pressure: 4 psi min; 10–15 psi max
Pressure comp.: No · PC dripline alternative: Apex PC
Best for: Row crops (surface/subsurface/under mulch); greenhouse; close spacing

Catalog ↗

eXXtreme Tape

Drip tape

Diameter: 16 & 22 mm
Wall: 5–15 mil
Emitter spacing: 3"–12"
Flow: 0.14–0.28 gph @ 8 psi (0.24–1.41 gpm/100 ft)
Pressure: 4 psi min; 10–15 psi max
Pressure comp.: No · PC dripline alternative: Apex PC
Best for: High-density plantings, sandy soils, hard-water / tough conditions

Catalog ↗

P1

Dripline

Diameter: 16 & 22 mm (EU also 12/25/29)
Wall: 6–15 mil (P1 / P1 Ultra)
Emitter spacing: ≥8" (20/30/40 cm)
Flow: 0.16–0.55 gph @ 1.0 bar
Pressure: 7–36 psi
Pressure comp.: No · PC version: Multibar F or Apex PC
Best for: Wide spacings, long runs; seasonal & multi-season; sub-irrigation

Catalog ↗

Apex PC

Dripline

Diameter: 17 mm (.560" ID), 18 mm (.620"), 20 mm (.690")
Wall: 45–50 mil
Emitter spacing: 18"–48"
Flow: 0.33, 0.42, 0.55 & 1.0 gph
Pressure: 7–60 psi
Pressure comp.: Yes (CV <5%) · Non-PC version: D7
Coil lengths: 1,000'
Best for: Permanent crops — nut trees, fruit trees and vineyards. 120 mesh filtration, 7-year non-prorated warranty; optional white skin for greenhouse use

Catalog ↗

D7

Dripline

Diameter: 16 / 18 / 20 / 23 mm
Wall: 45–47.5 mil
Emitter spacing: 12"–48"
Flow: 0.29–1.00 gph
Pressure: 5–50 psi
Pressure comp.: No · PC version: Multibar F or Apex PC
Best for: Permanent crops where PC isn't needed; flatter terrain, flexible spacing

Catalog ↗

Multibar F

Dripline

Diameter: 16 / 18 / 20 / 23 mm
Wall: 45–47.5 mil
Emitter spacing: 12"–48"
Flow: 0.29–1.00 gph @ 30 psi
Pressure: 7–12 psi min (PC)
Pressure comp.: Yes (CV <4%) · Non-PC version: D7
Best for: Permanent crops on severe slopes / long runs; surface & subsurface (AS)

Catalog ↗

PE Tubing

Poly tubing

Diameter: .520"–1.06" ID (.620"–1.18" OD)
Wall: .045", .0475", .050", .055" & .060"
Pressure: 47–66 psi working (by size and wall)
Coil lengths: cut lengths, 100', 500' & 1,000'
Sizes: 16, 18, 20, 25 & 32 mm nominal (1/2"–1-1/4")
Best for: Laterals, manifolds and distribution lines. Low-density resins with exceptional UV and acid resistance; seven-year non-prorated warranty

Catalog ↗

PE Oval Hose

Oval hose

Diameter: 2", 3" & 4"
Pressure: 21 psi
Coil lengths: 2": 225' · 3": 200' · 4": 131'
Best for: Cost-effective alternative to rigid pipe for distribution; unique bale style rolls up for easy retrieval and relocation

Catalog ↗

FlexiFlat LayFlat Hose (PVC)

Layflat

Diameter: 2", 3", 4", 6" & 8"
Pressure: 70 psi (2"–4") · 50 psi (6") · 40 psi (8")
Coil lengths: 328' bales
Best for: Distribution manifolds and transport lines. PVC reinforced with 3-ply polyester yarns, UV resistant; lays flat so it will not tangle or kink

Catalog ↗

FlexiFlat PE Layflat Hose

Layflat

Diameter: 3", 4" & 6"
Pressure: 25 psi with outlets · 35 psi blank
Coil lengths: 328' (3", 4" & 6")
Sizes: Outlet spacings 20"–80" (by size)
Best for: Soft, flexible PE layflat with 3-ply polyester yarns and simultaneous extrusion for maximum bonding — farm equipment can drive over it. Rated -4°F to 158°F

Catalog ↗

SpinRite PC

Micro-sprinkler

Pressure comp.: Yes
Best for: Single-stage, or two-stage with a Range Limiter spinner for young trees — snap off the limiter tab once the trees mature

Catalog ↗

866 / 866PC

Micro-sprinkler

Pressure comp.: PC version available (866PC)
Best for: Micro-sprinkler available in standard and pressure-compensating versions

Catalog ↗

Metal Sand Media Filters

Filtration

Best for: Media filtration for surface water with an organic load that blinds a screen

Catalog ↗

PVC Ball Valves

Hose & fittings

Connection: Schedule 40 PVC, UV protected
Best for: UV-protected Schedule 40 PVC that resists fertilisers and chemicals, and stays easy to open and close after a season in the sun

Catalog ↗

Air Vents

Air vent

Best for: Controls air intake and release on Irritec lines — dumps air on fill, admits it on shutdown so the pipe cannot collapse

Catalog ↗

Metal Screen Filters

Filtration

Best for: Irritec design and build their own filters. Simple construction, and the hydraulic capacity holds up through pressure swings and external stress rather than distorting

Catalog ↗

Toro

2" & 3" Plastic Disc Filters

Filtration

Sizes: 2" and 3"
Best for: Primary or secondary disc filtration in a light plastic body — the practical size for a greenhouse or a single block

Catalog ↗

P-220 Series Valves

AC solenoid valve

Pressure: Rated to 220 psi; regulates anywhere from 5 to 100 psi
Connection: Glass-filled nylon body; filter screens fitted on 2" and 3"
Sizes: 1", 1½", 2" and 3"
Best for: Switches and regulates in one valve, over an unusually wide 5–100 psi band. The 2" and 3" carry an upstream filter screen so debris cannot foul the valve internals

Catalog ↗

Aqua-Traxx Azul

Drip tape

Diameter: 5/8", 6/8" (Sweet Spot), 7/8", 1", 1-1/8", 1-3/8"
Wall: 5–15 mil
Emitter spacing: 4"–36"
Flow: 0.07–0.53 gph @ 8 psi
Pressure: 4–15 psi (max by wall)
Pressure comp.: No (Cv <3%) · PC version: Aqua-Traxx PC
Best for: Latest-generation Aqua-Traxx — row crops, market farms & raised beds; multi-stage emitter filters for dirty water; surface or SDI

Catalog ↗

Aqua-Traxx (PBX)

Drip tape

Diameter: 5/8"–1-3/8" (16–35 mm)
Wall: 4–15 mil
Emitter spacing: 4"–24" (36" on 0.53 gph)
Flow: 0.07–0.53 gph @ 8 psi (~0.09–2.96 gpm/100 ft)
Pressure: 4 psi min; 8–15 psi max by wall
Pressure comp.: No · PC version: Aqua-Traxx PC
Best for: Row crops & vegetables; surface or subsurface (SDI)

Catalog ↗

Aqua-Traxx FC

Drip tape

Diameter: 5/8", 7/8", 1-3/8"
Wall: 6–15 mil
Emitter spacing: 6"–24"
Flow: 0.13–0.27 gph @ 10 psi
Pressure: 4 psi min; 15–25 psi max
Pressure comp.: No (flow-controlling) · PC version: Aqua-Traxx PC
Best for: Long runs / undulating terrain where you dial the rate

Catalog ↗

Aqua-Traxx PC

Drip tape

Diameter: 0.635" (5/8"), 0.875" (7/8") & 1.375" (1-3/8") ID
Wall: 8–15 mil
Emitter spacing: 6"–24"
Flow: 0.20–0.27 gph @ 10 psi (0.17–0.90 gpm/100 ft)
Pressure: 4–25 psi
Pressure comp.: Yes (Cv 3%, 140 mesh filtration) · Non-PC version: Aqua-Traxx Azul or PBX
Best for: Difficult topography, long laterals, wind, low/variable pressure

Catalog ↗

Neptune

Dripline

Diameter: 5/8", 7/8"
Wall: 8, 10, 13, 15 & 18 mil
Emitter spacing: 8"–24"
Flow: 0.16, 0.25, 0.30, 0.47 & 0.75 gph @ 8 psi
Pressure: 6 psi min; 12–30 psi max
Pressure comp.: No · PC version: BlueLine PC
Best for: Semi-permanent / SDI; rocky, abrasive soils

Catalog ↗

BlueLine PC

Dripline

Diameter: 0.550" (16 mm) & 0.620" (18 mm) ID
Wall: 45 mil nominal
Emitter spacing: 12", 18", 24", 30", 36", 42", 48", 54", 60"
Flow: 0.40, 0.53 & 1.06 gph @ 15 psi
Pressure: 10–60 psi
Pressure comp.: Yes (CV <3%) · Non-PC version: BlueLine Classic
Best for: Permanent crops (vineyards/orchards); on ground, buried, or hung on wire

Catalog ↗

BlueLine Classic

Dripline

Diameter: 16–20 mm (0.620")
Wall: ~45 mil (approx.)
Emitter spacing: 12"–72"
Flow: 0.53–1.00 gph
Pressure: 5–60 psi
Pressure comp.: No · PC version: BlueLine PC
Best for: Permanent-crop dripline where PC isn't needed; multi-season

Catalog ↗

Blue Stripe Polyethylene Hose

Poly tubing

Diameter: 0.375"–1.365" ID (10, 13, 14, 15, 16, 18, 20, 26 & 35 mm)
Wall: .035"–.080"
Pressure: 46–81 psi (by size and wall)
Coil lengths: 100', 250', 300', 500', 660' & 1,000'
Sizes: 1/2", 5/8", 3/4", 1" & 1-1/4" nominal — 20 part numbers
Best for: Laterals and supply runs. Also offered in white for nursery and extreme-climate use to help control water temperature, and in blue/white/purple stripe for zone identification. 7-year warranty

Catalog ↗

Blue Stripe Oval Hose

Oval hose

Diameter: 2.052" ID (2") · 3.043" ID (3")
Wall: .051"–.076"
Pressure: 21 psi
Coil lengths: 200', 300' & 450'
Sizes: 1-1/2", 2" & 3"
Best for: Low-pressure supply lines and submains; linear low-density resin, lays flat for storage and rounds out under pressure. Alternative to rigid PVC

Catalog ↗

Micro-Sprinkler PC

Micro-sprinkler

Pressure: 20–60 psi
Pressure comp.: Yes · Non-PC version: Micro-Sprinkler VI Classic
Connection: 3/8" MPT inlet
Best for: Orchards, vineyards and nursery on undulating ground and long laterals — PC design holds uniform flow and diameter across a wide pressure range, with wider throw than Toro’s earlier micro-sprinklers

Catalog ↗

Micro-Sprinkler VI Classic

Micro-sprinkler

Pressure comp.: No · PC version: Micro-Sprinkler PC
Connection: 3/8" inlet
Sizes: 8 colour-coded nozzles
Best for: Under-tree and overhead in orchards, vineyards and nurseries. Balanced spin rate limits stake vibration; anti-insect, dust-proof spinner retracts to protect the nozzle when off

Catalog ↗

Foggers

Mister & fogger

Best for: Toro Ag fogger range for greenhouse cooling and propagation

Catalog ↗

Tempus AG (Tempus CT / Tempus MV)

DC Controller

Best for: Toro’s agricultural controller units — the CT mains and MV valve-mount variants of the Tempus platform

Catalog ↗

Tempus DC Series

DC Controller

Connection: Battery powered with integrated wireless; available with or without an LCD screen
Best for: Fully waterproof battery controller for areas with no electrical connection, programmed from the Toro Tempus DC mobile app

Catalog ↗

Tempus Automation System

DC Controller

Connection: 4G, Wi-Fi, LoRa and Bluetooth
Best for: Toro’s automation platform for agriculture, and the first to carry 4G, Wi-Fi, LoRa and Bluetooth together. The longer-range links mean less time walking the block to set up and maintain the system, and it handles fertigation as well as irrigation

Catalog ↗

EVOLUTION Series Controller

AC Controller

Connection: 1.25 amp transformer, powers up to four solenoids at once; expansion modules are hot-swappable
Sizes: Modular 4 to 16 stations — EVO-4ID indoor, EVO-4OD and EVO-8OD outdoor, with EMOD-4 and EMOD-12 expansion modules
Best for: Uses live temperature and solar readings plus historical weather to work out how much water the system actually needs, and takes up to three soil sensors (one per schedule) to check moisture before it runs. Backlit display, and schedules or individual sprinklers can be started from up to 1,000 ft away. Station count changes without powering down

Catalog ↗

TDC-100 / TDC-200 Two-Wire

AC Controller

Connection: Two-wire decoder path
Best for: Ten fully independent resident programs with two program types, including a standard irrigation program that fires a station or group with six start times a day. Run times set in hours, minutes and seconds — useful on mist and propagation where seconds matter

Catalog ↗

Aqua-Clear Sand Media Filters

Filtration

Flow: 50 to 400 gpm
Pressure: Rated to 75 psi
Sizes: 18", 24", 30" and 36" systems
Best for: Fibreglass tanks, so corrosion is not the failure mode it is on steel. Complete automated system for drip blocks — media handles the organic load that blinds a screen

Catalog ↗

SentrySand Sand Media Filters

Filtration

Best for: Aimed squarely at water carrying high organic matter and algae — pond and canal supply, where a screen filter spends all day backflushing

Catalog ↗

F100 Series Filters

Filtration

Pressure: Filtration from 80 micron
Connection: Stainless steel screen elements on PVC cylinders; disc elements available
Sizes: 2", 3" and 4"
Best for: One body takes either a stainless screen or a disc element, so the same filter can be re-specified if the water changes

Catalog ↗

250 Series Valves

AC solenoid valve

Sizes: 1", 1½" and 2"; in-line and angle, with or without flow control
Best for: The general-purpose Toro control valve, in-line or angle, with flow control on request

Catalog ↗

Neptune Flat Emitter Dripline

Dripline

Best for: The moulded flat emitter resists plugging and takes rougher handling — for demanding sites and subsurface work

Catalog ↗

Aqua-Traxx FC (Flow Control)

Drip tape

Best for: Toro call this the only flow-controlling drip tape made. Builds on the Aqua-Traxx PBX cross-section, which balances the flowpath to manage turbulence — uniform distribution with less clogging

Catalog ↗

RXC Series Controller

AC Controller

Connection: Optional Wi-Fi; advanced flow monitoring
Sizes: 6-station base, expanding in 4-station modules to 22 stations
Best for: Contractor-friendly modular controller — start at six stations and add four at a time as the site grows. Flow monitoring catches a broken lateral instead of letting it run all night, and Wi-Fi is available where there is coverage

Catalog ↗

Eagle Plus Series

AC Controller

Connection: Conventional and 2-wire on the same controller; several enclosure options including a plastic cabinet
Sizes: Scalable to 200 stations
Best for: Toro’s commercial-grade controller for centralised internet-based management. It takes conventional wiring and 2-wire in the same unit, which matters when an older block is being extended rather than replaced, and scales to 200 stations

Catalog ↗

TMC-424 Modular Controller

AC Controller

Connection: Outdoor-rated build available (TMC-424E-OD)
Sizes: 4 to 24 stations
Best for: Modular commercial controller for larger sites, with an accurate timing mechanism and an outdoor-rated cabinet option

Catalog ↗

TMC-212 Series Controller

AC Controller

Sizes: 2 to 12 stations, in 2-station expansion modules
Best for: Expands two stations at a time, so the station count matches the job rather than being bought ahead. Suits small commercial and larger residential blocks

Catalog ↗

DDC Series Controller

AC Controller

Best for: Toro’s dial digital controller — a straightforward interface for straightforward schedules

Catalog ↗

Sentinel Central Control

AC Controller

Best for: Central control software running irrigation across a whole site from one screen, rather than walking to each controller. Schedules, monitors and reports from a computer or mobile device

Catalog ↗

DXi Central Control Satellite

AC Controller

Connection: Runs either Rain Master Laguna or Toro Sentinel software on one platform
Best for: Field satellite for a central-control system, and unusually it takes either Laguna or Sentinel software — so it drops into an existing installation without dictating which platform the site runs

Catalog ↗

220G Series Brass Valves

AC solenoid valve

Pressure: Operates to 220 psi
Connection: 120-mesh stainless steel filter screen, continuously flushed by the flow
Best for: Brass body for dirty-water resistance, and the screen self-flushes as water passes rather than needing to be pulled and cleaned. Available in plastic and brass builds

Catalog ↗

Jain

Chapin Drip Tape / Turbo Tape

Drip tape

Diameter: 5/8", 7/8"
Wall: 4–15 mil
Emitter spacing: 2"–24"
Flow: 0.10–1.80 gpm/100 ft (~0.02–0.60 gph)
Pressure: rated 8 & 10 psi (~4–14 psi)
Pressure comp.: No · PC version available — ask us
Best for: Row crops & vegetables (onions, tomatoes, peppers, melons, strawberries)

Catalog ↗

Jain Turbo Tape / Chapin STF

Drip tape

Diameter: 12–25 mm
Emitter spacing: 10–60 cm
Flow: 0.5–2.1 l/h (~0.13–0.55 gph)
Pressure comp.: No · PC version available — ask us
Best for: Closely spaced row crops; greenhouse & nursery

Catalog ↗

Chapin Deluxe / Twinwall

Drip tape

Diameter: 16 & 22 mm (5/8")
Emitter spacing: 10–60 cm
Flow: 0.45–1.51 l/h (~0.12–0.40 gph)
Pressure comp.: No · PC version available — ask us
Best for: Closely spaced row crops & vegetables; greenhouse & nursery

Catalog ↗

Turbo Excel / Plus

Dripline

Diameter: 12–25 mm; 5/8"–1-3/8"
Emitter spacing: 15–150 cm
Flow: 0.20–1.06 gph @ 14 psi
Pressure: rated 14 psi (1 kg/cm²)
Pressure comp.: No · PC version available — ask us
Best for: Row crops, spaced orchard crops, greenhouse/nursery; multi-season/SDI

Catalog ↗

J-Turbo Line Super (Round)

Dripline

Diameter: 12, 16, 20 mm OD
Emitter spacing: 20–60 cm
Flow: up to ~1.06 gph @ 14 psi
Pressure: rated 14 psi
Pressure comp.: No · PC version available — ask us
Best for: Widely spaced orchard crops; loop systems; short greenhouse laterals

Catalog ↗

Oval Hose

Oval hose

Diameter: 1-1/2" to 4"
Pressure: 21 psi max
Best for: Mains and submains in larger sizes, laterals in smaller; LDPE, UV-stabilised, ~98% round under pressure

Catalog ↗

Accu-Tab

Accu-Tab Series 3000

Chlorination

Flow: 0.57 – 36.4 lb/hr chlorine delivery across the series
Connection: Gravity or suction-side feed; rigid PVC body
Sizes: 3012 — up to 0.9 lb/hr, 12 lb tablet capacity, 26"H × 9" dia · 3075 — up to 2.5 lb/hr, 75 lb, 24"H × 12" dia · 3150 — up to 7.4 lb/hr, 150 lb, 26.4"H × 18" dia · 3530 — 45 lb/hr, 300 lb, 31.5"H × 24" dia · 30600 — 10–35 lb/hr, 600 lb, 31"H × 30" dia · 361000 — up to 25 lb/hr, 1000 lb, 31"H × 36" dia
Best for: The straightforward unit for a nursery treating pond, well or reuse water. Tablets erode in a controlled bed rather than being dosed as liquid, so there is no day tank, no metering pump and no spill containment to build. Start at the 3075 or 3150 for most greenhouse ranges — the 3012 is small enough for a single house, the 3530 and up are for large blocks

Catalog ↗

Accu-Tab Series 2000 P

Chlorination

Connection: Skid-mounted with booster pump; re-injects the chlorinated stream into a pressurised line or tank
Sizes: 2075 P — 2.5 lb/hr, 75 lb capacity, 20" × 40" footprint · 2150 P — 10.5 lb/hr, 150 lb, 20" × 40" · 2300 P — 25 lb/hr, 300 lb, 31" × 63" · 2600 P — 35 lb/hr, 600 lb, 36" × 68"
Best for: For when the treated water has to go to more than one place, or back into a pressurised main rather than a holding tank. Also the one specified where produce is being washed or sprayed during handling

Catalog ↗

Accu-Tab Series 2000 GS

Chlorination

Connection: 1.5" socket inlet and outlet (2" on the 2600 GS)
Sizes: 2075 GS — up to 2.5 lb/hr, 75 lb capacity, 1.5" socket in and out · 2150 GS — up to 10.5 lb/hr, 150 lb, 1.5" · 2300 GS — up to 25 lb/hr, 300 lb, 1.5" · 2600 GS — up to 35 lb/hr, 600 lb, 2"
Best for: The plumbed-in version of the 2000 series — socket connections straight into the line instead of a skid, which keeps the install tidy where floor space is tight

Catalog ↗

Accu-Tab PowerPro Series

Chlorination

Connection: Skid-mounted automated system
Sizes: PowerPro 3012 — 0.5 lb/hr, 12 lb capacity, 30" × 58" · 3075 — 0.3–2 lb/hr, 75 lb, 30" × 58" · 3150 — 1–12 lb/hr, 150 lb, 30" × 58" · 3530 — 4–25 lb/hr, 300 lb, 36" × 68" · 30600 — 10–35 lb/hr, 600 lb, 36" × 68" · 361000 — 10–35 lb/hr, 1000 lb, 41" × 76" · 481200 — 10–35 lb/hr, 1200 lb, 54" × 87"
Best for: The controlled-dose end of the range — delivery is modulated across a band rather than fixed, so residual holds steady as demand swings through the day. Worth it where a target residual has to be evidenced rather than estimated

Catalog ↗

Accu-Tab PowerPro MD Series

Chlorination

Connection: Skid-mounted automated system, multi-directional feed
Sizes: PowerPro MD 3075 — 0.3–2 lb/hr, 75 lb capacity, 36" × 68" · MD 3150 — 1–12 lb/hr, 150 lb, 36" × 68" · MD 3530 — 4–25 lb/hr, 300 lb, 36" × 68" · MD 30600 — 10–35 lb/hr, 600 lb, 36" × 68" · MD 361000 — 10–35 lb/hr, 1000 lb, 41" × 76" · MD 481200 — 10–35 lb/hr, 1200 lb, 54" × 87"
Best for: PowerPro control with multi-directional feed, for a site dosing more than one destination from a single chlorinator

Catalog ↗

Accu-Tab SI Tablets

Chlorination

Connection: For use in Accu-Tab chlorinators
Sizes: 68% available chlorine; supplied in stackable pails
Best for: The consumable the whole system runs on. 68% available chlorine with a scale inhibitor built in to hold off scale build-up, and manufactured to a controlled erosion rate so the delivery stays consistent as the bed goes down. More neutral in pH and less corrosive than liquid chlorine, and the pails stack — a real difference against drums and totes when storage is tight

Catalog ↗

Al-Magor

Punches for PE Pipe

Specialized tool

Sizes: Punch tips including 12 mm, 15 mm and 18 mm; with or without saddle
Best for: A threaded handle and a sharp punch tip make a clean hole with one hand, and the plastic slug stays out of the pipe rather than washing downstream into an emitter. Winged and threaded handle versions; separate punches for start connectors

Catalog ↗

Inserters for Drippers & Fittings

Specialized tool

Sizes: Pro Grip and 8 mm models; versions for PE pipe and for micro-tube
Best for: Seats drippers, connectors and fittings without fighting the pipe or splitting the barb. Separate ranges for PE lateral and for micro-tube, and combined punch-and-insert tools that do both in one motion

Catalog ↗

Layflat Cutters

Specialized tool

Sizes: 9, 12, 13, 14, 15, 16, 16.5, 17, 19, 20 and 42 mm (LFC series)
Best for: Cuts a clean sized hole in layflat for the outlet fitting — eleven sizes so the hole matches the connector instead of being stretched to fit, which is what starts a leak

Catalog ↗

Drill Bits for PE Pipe

Specialized tool

Sizes: 7.5, 8, 8.5, 12, 14, 15, 15.5, 16, 17, 18, 19, 20, 22, 24, 25, 26, 30 and 33 mm (DR series)
Best for: Eighteen sizes covering every common saddle and fitting, for opening larger pipe where a punch will not reach

Catalog ↗

Quick Drill QDB / QDS

Specialized tool

Sizes: QDS small — 3.2, 3.7, 7.5, 8.2, 9, 11, 12 mm · QDB big — 8.2, 11, 12, 14, 15, 17, 22, 24 mm
Best for: Two bodies covering 3.2 mm up to 24 mm, so one tool family spans a micro-tube take-off and a submain saddle. Spare punch tips are sold separately for both, which means a blunt tip is a two-minute change rather than a new tool

Catalog ↗

Twist Punch

Specialized tool

Sizes: 12, 15 and 18 mm
Best for: The threaded handle winds the punch through the wall rather than relying on hand force, and the plastic slug stays out of the hole instead of dropping into the pipe. Sharp tip on a winged handle — the tool for larger holes where a plain punch is hard work

Catalog ↗

Trigger Tools

Specialized tool

Sizes: TR3 with one 3 mm punch · TR2,3 with 2 and 3 mm · TR2,3,4 with 2, 3 and 4 mm; spare punches in 2, 3 and 4 mm
Best for: Squeeze-trigger punch, so a whole lateral gets punched without twisting a handle hundreds of times — the difference matters by the end of a row. Multi-punch heads carry two or three sizes at once so you are not swapping tools mid-run

Catalog ↗

Mini Punch

Specialized tool

Sizes: Mini Punch and Mini Punch Grip versions
Best for: Small hand punch for micro-tube and light lateral work, with a grip version for repeat use

Catalog ↗

Reamers

Specialized tool

Sizes: RM50 for 50 mm pipe
Best for: Cleans and sizes the bore before a connector goes in, so the fitting seats square instead of on a burr — a burr is what starts a weep six months later

Catalog ↗

Dripper Releaser

Specialized tool

Best for: Pulls a dripper back out of the lateral without tearing the hole — so a blocked emitter can be swapped and the same hole reused, rather than plugging it and punching again

Catalog ↗

Grip Tools

Specialized tool

Sizes: Grip tool for 5 and 7 mm pipe · grip for inserting parts and spikes into 16 mm pipe · Grip 4 Head
Best for: Gives a proper hold on the part being pushed home, so fittings and spikes seat fully without splitting the barb or skinning your hand

Catalog ↗

Inserter Adapters & Spare Punches

Accessory

Sizes: Brass inserter adapters, 3 mm and 4 mm adapters, spare punches for QDB and QDS
Best for: The consumables side — adapters that let one handle drive different inserter heads, and replacement punch tips so a worn tool is refreshed rather than replaced

Catalog ↗

Punch & Inserter Combination Tools

Specialized tool

Sizes: Includes Turbo Drip (Naan) and Plastro/Antelco-specific heads
Best for: Punches the hole and seats the dripper in one motion instead of two passes down the row. Heads are made to suit specific dripper brands — Turbo Drip, Plastro and Antelco among them — so the fit is right for the barb being used

Catalog ↗

Amiad

Manual Plastic Amiad Series

Filtration

Flow: Up to 220 gpm (50 m³/h)
Pressure: Filtration 50–3,500 micron
Sizes: 3/4"–3"
Best for: The small manual filter most greenhouse and nursery heads actually need — plastic body, screen or disc element, and the widest filtration range in the manual line

Catalog ↗

Manual Plastic Arkal Series

Filtration

Flow: Up to 705 gpm (160 m³/h)
Pressure: Filtration 20–800 micron
Sizes: 3/4"–6"
Best for: Disc filtration down to 20 micron — finer than a screen of the same size will hold, and the grooved discs give depth filtration that copes with organic matter rather than blinding off

Catalog ↗

Manual Plastic Tagline Series

Filtration

Flow: Up to 220 gpm (50 m³/h)
Pressure: Filtration 80–500 micron
Sizes: 3/4"–3"
Best for: Compact manual filter in screen or disc for small heads and sub-mains

Catalog ↗

Manual Steel Series

Filtration

Flow: Up to 1,320 gpm (300 m³/h)
Pressure: Filtration 50–3,500 micron
Sizes: 2"–8"
Best for: Steel-bodied manual screen filter for mainline duty where a plastic body will not take the pressure or the handling

Catalog ↗

Brushaway Series

Filtration

Flow: Up to 1,320 gpm (300 m³/h)
Pressure: Filtration 200–3,500 micron
Sizes: 2"–8"
Best for: Turn the handle and internal brushes sweep the screen — cleans without opening the housing or stopping irrigation, which is the practical difference between a filter that gets serviced and one that does not

Catalog ↗

Scanaway Series

Filtration

Flow: Up to 1,320 gpm (300 m³/h)
Pressure: Filtration 50–500 micron
Sizes: 2"–8"
Best for: Same manual-cleaning convenience as the Brushaway but with a suction scanner, taking it down to 50 micron for drip systems

Catalog ↗

TAF Series

Filtration

Flow: Up to 220 gpm (50 m³/h)
Pressure: Filtration 10–500 micron
Sizes: 2"–3"
Best for: The smallest fully automatic Amiad filter, and the one that fits a greenhouse head. Self-flushes without interrupting flow, down to 10 micron

Catalog ↗

Mini Sigma Series

Filtration

Flow: Up to 352 gpm (80 m³/h)
Pressure: Filtration 50–500 micron
Sizes: 2"–4"
Best for: Compact automatic screen filter for small to mid-size blocks

Catalog ↗

Sigma Pro Series

Filtration

Flow: Up to 1,233 gpm (280 m³/h)
Pressure: Filtration 50–500 micron
Sizes: 4"–8"
Best for: Mid-size automatic screen filtration for a whole nursery mainline

Catalog ↗

M100 Series

Filtration

Flow: Up to 1,760 gpm (400 m³/h)
Pressure: Filtration 80–500 micron
Sizes: 2"–4" (up to 440 gpm) and 4"–10" (up to 1,760 gpm)
Best for: Patented automatic screen filter across two size bands, so one family covers a small head or a full mainline

Catalog ↗

SAF Series

Filtration

Flow: Up to 1,760 gpm (400 m³/h)
Pressure: Filtration 10–800 micron
Sizes: 2"–10"
Best for: Suction scanning combines a focused flush with a scanner sweeping a multi-layered stainless screen, so it self-cleans efficiently on dirty water. Widest filtration span in the automatic range

Catalog ↗

MG Series

Filtration

Flow: Up to 3,520 gpm (800 m³/h)
Pressure: Filtration 80–500 micron
Sizes: 10"–14"
Best for: Large-diameter automatic screen filtration for a pump station feeding several blocks

Catalog ↗

ABF Series

Filtration

Flow: Up to 32,000 gpm (7,200 m³/h)
Pressure: Filtration 200–3,500 micron
Sizes: 3"–36"
Best for: Coarse automatic pre-filtration ahead of the fine filters, for surface water carrying weed and debris

Catalog ↗

Spin Klin Compact Angle 2"

Filtration

Flow: Up to 66 gpm (15 m³/h)
Pressure: Filtration 20–400 micron
Sizes: 2"
Best for: The smallest automatic Spin Klin — one 2" unit for a single greenhouse or a propagation house. Polymeric grooved discs give depth filtration with high dirt-holding capacity and hold organic matter far better than a screen

Catalog ↗

Spin Klin Batteries 2" / 3"

Filtration

Pressure: Filtration 20–400 micron
Sizes: 2" battery 3"–6" (up to 530 gpm) · 3" battery 6" (up to 880 gpm)
Best for: Spin Klin units ganged into a battery so capacity scales with the block — one unit backflushes while the rest keep filtering, so supply never stops

Catalog ↗

Spin Klin Apollo / Galaxy

Filtration

Pressure: Filtration 20–400 micron
Sizes: Apollo 4"–8" (1,409 gpm) · Apollo Twin 10"–12" (3,520 gpm) · Galaxy 8"–16" (13,200 gpm)
Best for: The large end of the Spin Klin range for pump stations and multi-block sites

Catalog ↗

Media Series

Filtration

Flow: Up to 330 gpm (75 m³/h) per unit
Sizes: 20"–48"
Best for: Media filtration for surface water with heavy algae or organic load, where screens and discs blind off too fast. Sand, glass, active carbon, anthracite or basalt media, with tank materials meeting international drinking water standards

Catalog ↗

AGF Series

Filtration

Flow: Up to 308 gpm (70 m³/h) per unit
Sizes: 48"
Best for: Large-vessel media filtration

Catalog ↗

Sand Separator Series

Filtration

Flow: Up to 110 gpm (25 m³/h)
Sizes: 2"
Best for: Spins sand out before it reaches the filter — for well water carrying grit, it saves the filter from doing work it was never meant to do

Catalog ↗

ADI-P Controller

Filtration

Sizes: One or two solenoid configurations
Best for: Runs the automated flush cycle on Amiad automatic filters, with monitoring — the piece that makes a self-cleaning filter actually self-cleaning

Catalog ↗

Fertilizer Injector Pump 4-01

Fertilizer injector

Connection: Hydraulic motor driven; manual or automatic operation
Injection ratio: From 66 gal/h (250 l/h)
Best for: Driven by line pressure rather than electricity, so it runs anywhere there is water and no power

Catalog ↗

Fertilizer Injector Pump 4-02 / 4-92

Fertilizer injector

Injection ratio: From 66 gal/h (250 l/h)
Best for: The mid-range hydraulic injector pumps, manual or automatic

Catalog ↗

Duplex Fertilizer Injector Pump 4-03

Fertilizer injector

Injection ratio: From 132 gal/h (500 l/h)
Best for: Duplex build doubles the injection rate to 132 gal/h for larger fertigation programmes

Catalog ↗

Antelco

Rotor Rain

Micro-sprinkler

Flow: 8.0–105 gph
Pressure: 15–30 psi
Throw diameter: 9.2–42 ft
Sizes: 11 nozzles, .035"–.110"
Best for: Precision micro-sprinkler for undertree and overhead irrigation in orchards, vineyards, row crops and nurseries

Catalog ↗

Rotor Rain Plus Mini Sprinkler

Micro-sprinkler

Flow: 5.8–98.3 gph
Pressure: 15–35 psi
Sizes: 11 nozzles, .031"–.110"
Best for: Smaller pattern version of the Rotor Rain for tighter spacings

Catalog ↗

Rotor Rain Plus PC

Micro-sprinkler

Flow: 5.7–36.1 gph
Pressure: 20–60 psi
Pressure comp.: Yes · Non-PC version: Rotor Rain Plus
Sizes: 11 nozzles, .031"–.110"
Best for: Pressure-compensating version for uniform output across long runs and undulating ground

Catalog ↗

Rotor Max

Micro-sprinkler

Pressure: 15–40 psi
Throw diameter: 22–46 ft
Sizes: 7 nozzles, .080"–.150"
Best for: Larger-pattern rotating micro-sprinkler for wider spacings

Catalog ↗

Multi-Outlet Dripper Assemblies

Multi-outlet dripper (MODS)

Best for: The multi-outlet side of the Antelco assembly range — one take-off feeding several containers through micro-tube. Also listed under Micro-sprinklers, where the same assemblies are shown as stake-mounted heads

Catalog ↗

Shrubbler 360° / 180°

Spray stakes & emitters

Connection: 0.16" barb or 10-32 UNF thread
Best for: The original Shrubbler. Rotating the click-indexed cap changes both flow and coverage, so one part covers a range of pot sizes and you can dial a plant up or down without swapping emitters. 360° and 180° patterns

Catalog ↗

Shrubbler 360° PC

Spray stakes & emitters

Pressure comp.: Yes
Best for: Shrubbler pattern with pressure compensation, for long runs and uneven ground where an adjustable non-PC emitter would drift

Catalog ↗

PotStream

Spray stakes & emitters

Best for: Adjustable emitter aimed at pots and planter boxes — flow and coverage tuned per plant

Catalog ↗

Mini Bubbler

Spray stakes & emitters

Best for: Bubbler output for containers and basins where a spray would drift or a dripper would channel

Catalog ↗

Midi Drip Emitter

Spray stakes & emitters

Flow: 1 gph and 2 gph
Best for: Fixed-flow emitter with a wide flow path, for pots, beds, shrubs, fruit trees, vines and row crops where pressure is already stable

Catalog ↗

Agri Drip PC

Spray stakes & emitters

Flow: 1 gph (grey) and 2 gph (green)
Pressure comp.: Yes
Best for: PC emitter for agricultural runs — constant flow whatever the pressure does along the line

Catalog ↗

SPEC Drip PC Self-Piercing

Spray stakes & emitters

Flow: 1 gph and 2 gph
Pressure comp.: Yes
Best for: Pierces the tube as it is fitted — no punch, no separate step, and no chance of a mis-sized hole leaking

Catalog ↗

CETA PC Take-Apart

Spray stakes & emitters

Flow: 1 gph and 2 gph
Pressure comp.: Yes
Best for: Comes apart for cleaning rather than being replaced when it blocks — worth it on dirty water or where labour to walk the block is the real cost

Catalog ↗

Asta Drip Spike PC

Spray stakes & emitters

Flow: 1 gph and 2 gph
Pressure comp.: Yes
Best for: PC emitter and spike in one, so the assembly stakes straight into the pot without a separate stake and tube

Catalog ↗

Pinch Drip PC

Spray stakes & emitters

Flow: 1 gph and 2 gph
Pressure comp.: Yes
Best for: Compact PC emitter for gardens, landscaping, nurseries, vineyards, orchards and row crops

Catalog ↗

Micro Fittings

Hose & fittings

Best for: The barbed micro fittings that join 4/7 and ¼" tube — tees, elbows, couplings and plugs

Catalog ↗

Xpando Fittings & Take-Off Director

Hose & fittings

Best for: The Xpando grips by expanding into the punched hole rather than relying on a barb alone, which is what stops take-offs blowing out under pressure

Catalog ↗

Double Barb DB Fittings

Hose & fittings

Best for: Two barbs instead of one for a firmer hold on the tube

Catalog ↗

Filters

Filtration

Best for: Antelco’s inline filters for micro and drip systems

Catalog ↗

Green Back Valves / eZyvalve4

Hose & fittings

Best for: Green Back and threaded valves plus the eZyvalve4 for isolating micro zones

Catalog ↗

Pressure Regulating Devices

Pressure regulator

Best for: Antelco’s pressure regulating devices for holding micro zones at a set pressure

Catalog ↗

Stake-Mounted Micro-Sprinkler Assemblies

Micro-sprinkler

Best for: Antelco micro-sprinklers supplied on a stake with micro-tube and fitting — dropped straight into the container rather than assembled part by part. Their dripper range and stake assemblies sit on the same page, so the sprinkler and emitter versions can be compared side by side

Catalog ↗

Berkeley

B-Series Self-Priming Centrifugal Pumps

Pump

Connection: All cast iron construction; NPT
Sizes: Four drive configurations — SAE, air-cooled with pre-mounted gasoline engine, frame mount, and close-coupled electric motor drive
Best for: The staple irrigation pump. A rapid-action check valve stops backflow and holds prime in the suction line, so it re-primes fast after a shutdown and will pull 25 ft of suction lift. Body design gives easy service access. Berkeley have been irrigating the San Joaquin Valley since 1937

Catalog ↗

B-Series Close-Coupled Centrifugal Pumps

Pump

Connection: Close-coupled electric motor drive; cast iron
Best for: Motor and pump on one shaft — a shorter, simpler install than a frame-mounted set, for a fixed pump house where you are not moving it around

Catalog ↗

LTHH Series Self-Priming Centrifugal Pumps

Pump

Best for: The high-head end of the Berkeley self-priming range, for systems needing more pressure than the standard B-Series delivers

Catalog ↗

Bermad

IR-22T Top Pilot

Pressure reducing

Pressure: Rated 150 psi; operating range 10–150 psi; adjusting scale and spring 12–40 psi (2-way only) or 12–80 psi
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle
Best for: The 200 Series Top Pilot — same integrated pilot and adjustment dial as the IR-12T in the compact 1½"–2" body most greenhouse and nursery zones use. Bermad restricts the warranty to irrigation use only

Catalog ↗

IR-220-55 (solenoid controlled)

Pressure reducing

Pressure: Rated 150 psi; operating range 10–150 psi; pilot springs 3–25 psi (green), 7–43 psi (grey), 12–95 psi (natural), 15–150 psi (blue/white)
Connection: Threaded globe or angle; 3-way control loop. AC solenoid S-390-T-2W, or S-982 for DC latching
Sizes: 1½" & 2" — globe or angle, threaded; Cv 43–47 on 1½", 54–60 on 2"
Best for: Regulates and switches from one body — it holds a constant downstream pressure regardless of demand, and opens or shuts on an electric signal from the controller. That is the combination an automated block wants: no separate zone valve upstream of the regulator. Composite hydro-efficient globe body, single moving part, unobstructed flow path. Excellent low-flow regulation and smooth opening and closing, so it will not slam the line. Four pilot springs cover 3 to 150 psi

Catalog ↗

IR-220

Pressure reducing

Pressure: Rated 150 psi; operating range 10–150 psi; pilot spring 3–25 psi (green)
Sizes: 1½" & 2"
Best for: The 200 Series answer for small agricultural blocks — same pressure-reducing function as the IR-120 in a compact 1½"–2" body. Available with solenoid control for combined regulation and on/off

Catalog ↗

IR-12T Top Pilot

Pressure reducing

Pressure: Rated 150 psi; operating range 7–150 psi; adjusting scale and spring 12–40 psi (2-way only) or 12–80 psi
Connection: Threaded or PVC; 2-way or 3-way control loop
Sizes: 1½", 2", 2½", 3" (PVC on 3" and 3"L)
Best for: Bermad’s newer 100 Series design — the pilot is built into the valve top with a high-resolution adjustment dial, so you set the downstream pressure by turning a numbered scale instead of swapping springs. Compact, plug and play, and quick to calibrate accurately in the field. Reduces higher upstream pressure to a constant downstream pressure regardless of flow, and opens fully when line pressure drops below setting

Catalog ↗

IR-120 hYflow

Pressure reducing

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green) and higher ranges
Connection: Threaded, flanged or Victaulic PVC adaptors (3", 4")
Sizes: 1½", 2", 2½", 3", 4" (6" on some builds)
Best for: Reduces higher upstream pressure to a lower constant downstream pressure regardless of fluctuating demand, and opens fully if line pressure drops. hYflow "Y" body with a look-through design gives very high flow capacity at low pressure loss. Engineered composite body — no internal bolts or nuts, chemical and cavitation resistant. Unitized Flexible Super Travel (FST) diaphragm regulates accurately and closes smoothly. Available with solenoid control (-55) so one valve both regulates and switches on/off

Catalog ↗

IR-230-55 (solenoid controlled)

Pressure sustaining

Pressure: Rated 150 psi; operating range 10–150 psi; pilot springs 3–25 psi (green), 7–43 psi (grey), 12–95 psi (natural), 15–150 psi (blue/white)
Connection: Threaded globe or angle; 3-way control loop. AC solenoid S-390-T-2W, or S-982 for DC latching
Sizes: 1½" & 2" — globe or angle, threaded; Cv 43–47 on 1½", 54–60 on 2"
Best for: Sustains minimum upstream pressure and switches on an electric signal, so one valve prioritises the zone and controls system fill-up. It also relieves excess pressure, protecting the pump and the line. Composite hydro-efficient globe body with a single moving part and excellent low-flow regulation. Four pilot springs cover 3 to 150 psi

Catalog ↗

IR-230

Pressure sustaining

Pressure: Rated 150 psi; operating range 10–150 psi; pilot spring 12–95 psi (natural)
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle
Best for: 200 Series pressure sustaining for small blocks — holds minimum upstream pressure in a compact 1½"–2" body

Catalog ↗

IR-130 hYflow

Pressure sustaining

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green) and higher ranges
Connection: Threaded, flanged or Victaulic PVC adaptors (3", 4")
Sizes: 1½", 2", 2½", 3", 4" (6" on some builds)
Best for: Sustains a minimum preset upstream (back) pressure and opens fully once line pressure rises above the setting — it prioritises pressure zones and controls how the system fills up, so remote or elevated plots do not starve while nearer laterals fill. Also prevents lines emptying, and holds backwash pressure on in-field filter stations. hYflow "Y" body for high flow at low loss. Available with solenoid control (-55)

Catalog ↗

IR-21T

AC solenoid valve

Pressure: Rated 150 psi; operating range 10–150 psi
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for: The compact 200 Series equivalent of the IR-11T — 2-way internal control loop, drip-tight close, Trio solenoid with manual override. The size most greenhouse and nursery zones actually need

Catalog ↗

IR-210

AC solenoid valve

Pressure: Rated 150 psi; operating range 10–150 psi
Connection: Threaded; NBR diaphragm, stainless spring
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for: 200 Series electric valve for small blocks and greenhouse zones — same composite body as the 100 Series in a 1½"–2" package. Takes the S-390-T-3W for AC, or the S-392-T-3W for DC latching. Bermad restricts the warranty to irrigation use only

Catalog ↗

IR-110

AC solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi
Connection: Threaded or plastic flanges, oblique (Y) pattern; adaptable on-site to a range of end connections
Sizes: 1½", 2", 2"L, 2½", 3", 4" (to 6"); Cv 58 on 1½"–2", Cv 116 on 2"L–3"
Best for: The 100 Series workhorse electric valve — hydraulically operated, diaphragm actuated, opens and shuts on an electric signal. Engineered composite body in Polyamide 6 with 30% glass fill, industrial grade, no internal bolts or nuts. Light: 2.4 lb at 1½". Takes the S-390-T-3W solenoid for 24 VAC or DC continuous controllers, or the S-982-3W for DC latching

Catalog ↗

IR-11T

AC solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi
Connection: External feed and internal bleed control loop; Trio solenoid mounts on the cover
Sizes: 1½", 2", 2½", 3", 4"
Best for: 100 Series valve built around a 2-way internal control loop — it closes drip-tight on an electric signal, which matters on a nursery block where a weeping valve wets benches between cycles. The Trio solenoid gives a 3-position manual override (Open, Auto, Close) right at the valve

Catalog ↗

IR-21T (DC latching)

DC latching solenoid valve

Pressure: Rated 150 psi; operating range 10–150 psi
Connection: 2-way internal control loop; takes the S-392-T-2W latching solenoid
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for: 200 Series 2-way valve with a latching solenoid — closes drip-tight on a battery pulse, and the Trio solenoid keeps the 3-position manual override at the valve

Catalog ↗

IR-210 (DC latching)

DC latching solenoid valve

Pressure: Rated 150 psi; operating range 10–150 psi
Connection: Threaded globe or angle; takes the S-392-T-3W latching solenoid
Sizes: 3/4", 1", 1½", 2" (DN20–DN50) — globe or angle; Cv 10 on 3/4"–1", 43–47 on 1½", 54–60 on 2"
Best for: The 200 Series valve ordered with a latching solenoid instead of the AC one — the small 3/4" and 1" sizes most greenhouse and nursery zones actually use, running off a battery or solar controller. Engineered composite body, NBR diaphragm, stainless spring

Catalog ↗

IR-110-DC Double Chamber

DC latching solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi
Connection: Threaded or plastic flanges; takes the S-982-3W latching solenoid
Sizes: 1½", 2", 2"L, 2½", 3", 4"
Best for: The 100-DC Series — a double-chambered valve that is fully powered both opening and closing, so it works at low pressure where a single-chamber valve will not, and closes drip-tight. Built for battery and solar controllers: the latching solenoid draws power only in the instant it switches, so a remote block with no mains power can still be automated. Engineered composite body

Catalog ↗

IR-120-DC Double Chamber

DC latching solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green), 7–43 psi, 12–95 psi or 15–150 psi
Sizes: 1½", 2", 2½", 3", 4"
Best for: Pressure reducing and battery-powered on/off in one valve — it holds a constant downstream pressure and switches on a latching pulse from a DC controller. Double-chambered, so it is fully powered both opening and closing and will work at low pressure where a single-chamber valve stalls. hYflow "Y" body for high flow at low loss. Uses the S-982-3W latching solenoid

Catalog ↗

IR-130-DC Double Chamber

DC latching solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green) and higher ranges
Sizes: 1½", 2", 2½", 3", 4"
Best for: Pressure sustaining plus battery-powered on/off in one valve — holds minimum upstream pressure so remote or elevated plots do not starve, and switches on a latching pulse. Double-chambered for full-powered opening and closing at low pressure. Uses the S-982-3W latching solenoid

Catalog ↗

ARV Vacuum Breaker

Air vent

Pressure: Rated 150 psi; operating 1.5–150 psi
Connection: Acetal (POM) body
Sizes: Male threaded 1/2" (DN12)
Best for: The smallest vacuum breaker Bermad make — 1/2" for the end of a lateral or a single riser, where a full kinetic valve is more than the line needs

Catalog ↗

K10 Kinetic Air Valve

Air vent

Pressure: Rated 150 psi; operating 1.5–150 psi
Connection: Male threaded; glass-reinforced nylon body
Sizes: Male threaded 3/4"–2" (DN20–50)
Best for: Large-orifice valve for filling and draining — it dumps the air ahead of the water on start-up and lets air back in on shutdown so the pipe cannot collapse under vacuum. It does not bleed air during operation; pair it with an automatic valve or use a C10 combination if you need both

Catalog ↗

A10 Automatic Air Valve

Air vent

Pressure: Rated 150 or 175 psi; opens from 0.1 bar (1.5 psi)
Connection: Male threaded, sideways outlet; glass-reinforced nylon body, PBT automatic orifice
Sizes: Male threaded 3/4"–1" (DN20–25); optional 3/4" female threaded outlet for retrofit
Best for: Bleeds the air that keeps accumulating at high points while the system is running under pressure. Trapped air is what quietly adds head loss and cuts flow, and a kinetic valve will not touch it — this is the one that does. Female-threaded outlet option lets it retrofit onto an existing riser

Catalog ↗

A30 Automatic Air Valve

Air vent

Connection: Sideways outlet; glass-reinforced nylon body, PBT automatic orifice
Sizes: Male threaded 3/4"–1" (DN20–25); optional 3/4" female threaded outlet for retrofit
Best for: Continuous air release like the A10, with a service port (code P) that takes a 1/8" plug for a pressure gauge and a snap-on 90° elbow for a 3/4" connection — so you can gauge the high point without breaking into the line

Catalog ↗

C10 Combination Air Valve

Air vent

Pressure: Opens from 0.1 bar (1.5 psi)
Connection: Straight-flow body with equal inlet and outlet size; threaded side outlet on the 2" for surge protection
Sizes: Threaded 3/4"–1" (DN20–25) and 2" (DN50)
Best for: Kinetic and automatic action in one valve. Surge Protection (code SP) partially closes the kinetic orifice so air discharges slower and the water column does not slam into the closing float — the usual cause of a burst on pump start. Assisted Closing (code AC) available

Catalog ↗

C15 Combination Air Valve

Air vent

Pressure: Rated 150 or 175 psi
Connection: Glass-reinforced nylon body; polypropylene and glass-reinforced nylon float
Sizes: Male threaded 2" (DN50) inlet, sideways female threaded 1.5" (DN40) outlet
Best for: Straight-flow body passes higher air flow rates than a standard combination valve of the same size — for filling a big submain quickly. Service port takes a 1/4" plug for a pressure gauge

Catalog ↗

C30 Combination Air Valve

Air vent

Connection: Straight-flow body with equal inlet and outlet; extension with downwards outlet on the 2"
Sizes: Threaded 1" (DN25) and 2" (DN50)
Best for: Surge protection is standard on the 2" — the kinetic orifice partially closes during the second stage of air discharge, so the water column decelerates instead of slamming the float shut. That slam is what splits pipe on pump start. Service ports for a gauge

Catalog ↗

C35 Combination Air Valve

Air vent

Pressure: Rated 230 psi — the highest in the Bermad plastic air valve range
Connection: Glass-reinforced nylon body; polypropylene and glass-reinforced nylon float
Sizes: Male threaded 2" (DN50) inlet, sideways female threaded 1.5" (DN40) outlet
Best for: Same straight-flow high-capacity design as the C15 but rated to 230 psi, for pump discharge and high-head mains where a 150 psi valve is not enough

Catalog ↗

C70 Combination Air Valve

Air vent

Connection: Straight-flow body with equal inlet and outlet size; three outlet options — sideways, downwards, or circular mushroom surround
Best for: Three outlet configurations from one valve: the mushroom surround discharges evenly all round, the downwards outlet keeps discharged water off the equipment below, and sideways suits a tight pit. Service ports for a pressure gauge

Catalog ↗

M10 Composite EFM

Water meter

Connection: Grooved sensor; composite flow tube with two coils
Sizes: DN50 to DN150 (2"–6")
Best for: No moving parts at all — two coils across a composite tube read the voltage the flow induces, so nothing wears and nothing fouls. Light and compact for its size, and it stays accurate at low flow rates where a mechanical meter under-reads. This is the meter Bermad pair with the Omega controllers

Catalog ↗

BIC 2 / BIC 4 / BIC 6

DC Controller

Connection: Two standard AA alkaline batteries; wall or valve mounted; built-in rain sensor connection
Sizes: 2, 4 or 6 stations
Best for: Independent schedule per valve with up to 5 start times a day, and up to three years on two AA batteries. Built-in rain sensor input so it will skip a cycle after rainfall. Suits drip, sprinkler and micro-sprinkler blocks, flowerpots, rooftops and roadside planting

Catalog ↗

BIC 1

DC Controller

Connection: Battery powered, mounts in-line on a valve
Sizes: 1 station
Best for: One valve, one controller — the simplest way to automate a single line with no power available

Catalog ↗

Omega R

DC Controller

Connection: DC latch valve operation; battery or solar charged; 4G with 2G fallback
Sizes: 4 latch outputs, 4 digital inputs
Best for: The smallest Omega — four valves. 16 programs with up to 16 sequential valve operations each, 4 programmable start times or cyclic windows, weekly or cyclic scheduling. Built-in 4G modem with 2G fallback, supporting NB-IoT and CAT-M. Runs offline on 4 LR14 (C size) alkaline batteries, or online from a 9–18 VDC supply — solar panel or grid. IP65 with UV protection. Keeps a log registry covering long offline periods, so nothing is lost when signal drops. Fertigation by volume and irrigation by triggers, with real-time alerts for high and low flow, leaks and clogs

Catalog ↗

Omega M

DC Controller

Connection: DC latch valve operation; battery or solar charged; 4G with 2G fallback
Sizes: 9 latch outputs, 8 digital inputs
Best for: The mid Omega, at nine valves and eight inputs — the most inputs in the range, so it suits a site with several meters or sensors to read. 16 programs with up to 16 sequential valve operations each, 4 programmable start times or cyclic windows, weekly or cyclic scheduling. Built-in 4G modem with 2G fallback, supporting NB-IoT and CAT-M. Runs offline on 4 LR14 (C size) alkaline batteries, or online from a 9–18 VDC supply — solar panel or grid. IP65 with UV protection. Keeps a log registry covering long offline periods, so nothing is lost when signal drops.

Catalog ↗

Omega L

DC Controller

Connection: DC latch valve operation; battery or solar charged; 4G with 2G fallback
Sizes: 13 latch outputs, 4 digital inputs
Best for: The largest Omega at thirteen valves. Aimed at small farms wanting scheduling, water-meter reading and monitoring without a wired controller — remote access through the Bermad cloud and phone app. Bermad supply it as a full hydrant if wanted: valve, water meter, solenoid and control together. 16 programs with up to 16 sequential valve operations each, 4 programmable start times or cyclic windows, weekly or cyclic scheduling. Built-in 4G modem with 2G fallback, supporting NB-IoT and CAT-M. Runs offline on 4 LR14 (C size) alkaline batteries, or online from a 9–18 VDC supply — solar panel or grid. IP65 with UV protection. Keeps a log registry covering long offline periods, so nothing is lost when signal drops.

Catalog ↗

Omega B

DC Controller

Connection: BLE 5.1 to a smartphone; syncs with the Bermad cloud
Sizes: One valve and one water meter
Best for: Rugged outdoor-rated controller for a single valve and meter, talking to your phone over Bluetooth locally and syncing to the cloud. The simplest way to put one hydrant under smart control

Catalog ↗

Omega S

DC Controller

Connection: Battery operated; Bermad Cloud web access and smartphone app
Best for: Cost-focused standalone Omega for small farms — irrigation scheduling, water-meter reading and parameter monitoring with online remote access

Catalog ↗

BIC 1000

AC Controller

Best for: Time-based controller covering agricultural irrigation, fertigation and filtration together — one unit sequencing the whole head, not just the valves

Catalog ↗

BIC 1500 (AC)

AC Controller

Best for: Cloud-based management system rather than a bare controller — hardware, software and communications together, with analytical tools behind an advanced interface. Volumetric control, so irrigation is measured in water delivered rather than minutes run — This is the mains build — 120/220 V AC with 24 V AC outputs.

Catalog ↗

BIC 1500 (DC)

DC Controller

Best for: Cloud-based management system rather than a bare controller — hardware, software and communications together, with analytical tools behind an advanced interface. Volumetric control, so irrigation is measured in water delivered rather than minutes run — This is the battery build — 12 V DC latching outputs, for a head with no power to it.

Catalog ↗

BIC 2500 (AC)

AC Controller

Connection: Cellular communication
Best for: The full Bermad system — local and central monitoring, analysis and control over cellular. For a grower running several sites from one screen — This is the mains build — 120/220 V AC with 24 V AC outputs.

Catalog ↗

BIC 2500 (DC)

DC Controller

Connection: Cellular communication
Best for: The full Bermad system — local and central monitoring, analysis and control over cellular. For a grower running several sites from one screen — This is the battery build — 12 V DC latching, including over two-wire.

Catalog ↗

MUT7000 Composite EFM

Water meter

Connection: DC powered with an integrated battery-powered converter
Sizes: DN50 to DN150 (2"–6")
Best for: Battery-powered electromagnetic meter, so it measures accurately at a remote hydrant with no mains supply. Holds accuracy on low flows in difficult conditions

Catalog ↗

MUT1000 Wafer EFM

Water meter

Sizes: MC406 and MC608 converter options
Best for: Wafer-bodied electromagnetic meter that clamps between flanges rather than needing its own pipe run — the shortest install of the range

Catalog ↗

MUT1222 / MUT2200 / MUT2300 EFM

Water meter

Sizes: Each available with MC406 or MC608 converter
Best for: The rest of the Bermad electromagnetic range, each paired with an MC406 or MC608 converter to suit the readout and output the site needs

Catalog ↗

IR-900 Basic Hydrometer

Water meter

Sizes: 1½"–4"
Best for: Meter and valve body in one unit, so a hydrant needs one fitting instead of two in series. The basic build measures without control functions added

Catalog ↗

IR-910 Solenoid Controlled Hydrometer

Water meter

Connection: Solenoid controlled; LS variant available
Sizes: 1½"–4"
Best for: The IR-900 with a solenoid on top — meters the water and switches the zone from the same body. For an automated block this replaces a meter, a valve and the fittings between them

Catalog ↗

Turbo-Bar Woltman Water Meter

Water meter

Connection: Flanged; magnetic register; reed switch sensor giving one or two pulse outputs
Sizes: 40–300 mm (1½"–12")
Best for: Heavy duty and built for high flow. The magnetic register covers a very wide flow range and is sealed from the water, which is what gives it the long service life. Reed switch gives one or two pulse outputs for a controller. Available as Turbo-Bar-M mechanical or Turbo-Bar-E electronic

Catalog ↗

Turbo-IR Paddle Wheel Water Meter

Water meter

Connection: Straight-flow flanged body; reed switch sensor with one or two pulse outputs
Sizes: 2" (DN50) to 12", flanged — Cv 133 at 2", 222 at 2½", 253 at 3"
Best for: The paddle wheel sits out of the main stream, so suspended matter barely touches the measuring element — that is what lets it hold accuracy on irrigation water that would foul a full-bore turbine. Turbo-IR-M mechanical or Turbo-IR-ME with electronic register

Catalog ↗

Bar Meter Multi-Jet

Water meter

Connection: Threaded straight-flow body; electronic calibration
Sizes: DN12 (½") to DN50 (2"), threaded
Best for: The small end of the Bermad range, from ½" up. Multi-jet gives high accuracy and a steady curve across a wide flow range, with a rotating star for at-a-glance flow indication — you can see whether water is moving without reading the dial

Catalog ↗

IR-420

Pressure reducing

Connection: Threaded or flanged; cast iron body
Sizes: 1"–16" (DN25–DN400)
Best for: The metal 400 Series — over 30 years in the market and the best value in the Bermad line. Full-bore seat with an unobstructed flow path; one-piece elastomeric diaphragm vulcanized to a radial seal disc, peripherally supported so it will not distort. Reduces higher upstream pressure to a lower constant downstream pressure. Suits computerized irrigation systems, distribution centers and filter stations

Catalog ↗

IR-430

Pressure sustaining

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 3–25 psi (green)
Connection: Cast iron body; threaded or flanged
Sizes: 1½", 2", 2½", 3", 4"
Best for: The metal 400 Series sustaining valve. In-line it sustains a minimum preset upstream pressure regardless of fluctuating flow or varying downstream pressure; installed as a relief or circulation valve it dumps line pressure above the preset. Position indicator assembly and flow stem available

Catalog ↗

IR-410

AC solenoid valve

Pressure: Rated 150 psi; operating range 7–150 psi
Connection: Cast iron body; threaded or flanged
Sizes: 1½", 2", 2½", 3", 4" and larger
Best for: The metal 400 Series electric valve for mainlines and anywhere a composite body is not wanted. Full-bore seat, unobstructed flow path, one-piece elastomeric diaphragm vulcanized to a radial seal disc

Catalog ↗

IR-920 Hydrometer

Pressure reducing

Pressure: Rated 250 psi; operating range 7–250 psi; pilot spring 12–95 psi (natural) or 15–150 psi (blue/white)
Connection: Ductile iron body, reinforced nylon and brass internals
Sizes: 1½", 2", 3", 4"
Best for: A hydrometer and a pressure reducing valve in one unit — meters the water and regulates downstream pressure from the same body, so a zone needs one fitting instead of two. Highest pressure rating in the Bermad irrigation line at 250 psi

Catalog ↗

43Q Quick Relief

Pressure sustaining

Sizes: 1½" (DN40) and up
Best for: Opens fast on a pressure surge to protect the line, then closes slowly to avoid causing a second surge. Use where pump start-up or sudden valve closure can spike the system

Catalog ↗

IR-820 Hydrometer (solenoid controlled)

Pressure reducing

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 12–95 psi
Connection: Threaded or flanged; solenoid control
Sizes: 1½", 2", 3", 4"
Best for: All-in-one mainline flow meter and pressure reducing valve, with solenoid control added — it meters the water, regulates downstream pressure and switches the zone from one body. Saves fitting a meter, a regulator and a zone valve in series

Catalog ↗

IR-930 Hydrometer

Pressure sustaining

Pressure: Rated 150 psi; operating range 7–150 psi; pilot spring 12–95 psi
Connection: Threaded or flanged; vacuum-sealed register
Sizes: 1½", 2", 3", 4"
Best for: Mainline flow meter and pressure sustaining valve in one body — meters the water while holding minimum upstream pressure to a setpoint. The vacuum-sealed register keeps the dial readable after years outdoors

Catalog ↗

Cycle Stop Valves

CSV125 Thermoplastic

Pump

Sizes: CSV125-1 and CSV125-3
Best for: Thermoplastic body for water that would attack a metal valve

Catalog ↗

CSV1A

Pump

Flow: 1 to 25 gpm
Pressure: Adjustable 15–150 psi
Connection: Dual threaded — 1" female NPT and 1¼" male NPT; two ½" side ports for pressure switch, gauge or relief valve; one ¾" bottom port for the pressure tank
Best for: Holds constant pressure by throttling the pump to match demand, instead of cycling it on and off. That means a small tank and no VFD — far less to go wrong and far cheaper than variable-speed. Inlet-to-outlet pressure difference must stay within 125 psi

Catalog ↗

CSV125 / CSVS125

Pump

Flow: 1–30 gpm or 3–50 gpm depending on model
Pressure: Preset 40, 50 or 60 psi (stainless version 50 or 60 psi only)
Best for: Preset rather than adjustable — you pick the pressure at order and it holds it, with nothing to drift or be tampered with. Stainless version for corrosive water

Catalog ↗

CSV2W

Pump

Flow: 1 to 50 gpm
Pressure: Adjustable 25–75 psi, or 50–120 psi build
Connection: 1¼" male and 1" female threads; also 1¼" female NPT
Best for: Double the flow of the CSV1A in the same idea — automatically adjusts pump output to match a varying demand. Two pressure bands to choose from

Catalog ↗

DEMA

MixRite TF-3

Fertilizer injector

Flow: 0.8–11 gpm
Connection: 1" NPT
Injection ratio: 0.3–2% (333:1 to 50:1)
Best for: Low-flow unit for fertiliser, pesticide and other additive injection. Positive displacement, water driven — no electricity required

Catalog ↗

MixRite TF-5

Fertilizer injector

Flow: 1–22 gpm
Connection: 1" NPT
Injection ratio: 0.2–2% (500:1 to 50:1)
Best for: Fertigation in greenhouses, CEA and nurseries. No electricity required — driven by water flow

Catalog ↗

MixRite TF-10

Fertilizer injector

Flow: 2–45 gpm
Connection: 1-1/2" NPT
Injection ratio: 0.2–2% (500:1 to 50:1)
Best for: Greenhouses, nurseries and open-field drip or pivot irrigation

Catalog ↗

MixRite TF-25

Fertilizer injector

Flow: 9–110 gpm
Connection: 2" NPT
Injection ratio: 0.3–2.5% (333:1 to 40:1)
Best for: Largest MixRite — high-flow greenhouse, nursery and open-field fertigation

Catalog ↗

Dramm

400 Aluminum Water Breaker Nozzle

Watering tool

Flow: 11.1 @ 40 PSI
Sizes: Item 400AL
Best for: The original full-flow shower head nozzle. Dramm's aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants or disturbing soil. Used and recommended daily by professional growers worldwide. Cast aluminum and hand machined with 3/4 inch brass hose threads. Invented, designed and manufactured in the U.S.A. since 1945.

Catalog ↗

170 Aluminum Water Breaker Nozzle

Watering tool

Flow: 7 @ 40PSI
Sizes: Item 170AL
Best for: The 170AL Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its possible volume. Cast aluminum with 3/4 brass hose threads. Manufactured in the U.S.A.

Catalog ↗

400PL Water Breaker Nozzle with Protective Ring

Watering tool

Flow: 11.1 @ 40 PSI
Sizes: Item 72646
Best for: The 400PL With Protective Ring returns to our familiar Blue color but with the additon of our black protective ring. This ring prevents damage by absorbing and transferring blows around the disk.

Catalog ↗

400PL Water Breaker Nozzle

Watering tool

Flow: 11.1 @ 40 PSI
Sizes: Item 400PL
Best for: The 400PL Water Breaker provides fast, full-flow watering without damage to your plants. Patterned after the original 400 Aluminum water breaker , the 400PL is made from high-impact ABS plastic and aluminum to provide a lightweight alternative. Used by professional growers worldwide. Made in U.S.A. 3/4 hose threads.

Catalog ↗

170PL Water Breaker Nozzle

Watering tool

Flow: 7 @ 40 PSI
Sizes: Item 170PL
Best for: Patterned after the 170 Aluminum water breaker, the 170PL is an excellent choice for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets). Adjust water flow to 50% of its possible volume. Made in the U.S.A. from ABS plastic. 3/4 hose threads.

Catalog ↗

480PL Plastic Fine Water Breaker Nozzle

Watering tool

Flow: 7 @ 40 PSI
Sizes: Item 480PL
Best for: 480 Plastic Water Breaker. Stainless steel disk. Micro-fine holes. Focused Pattern.

Catalog ↗

480AL Aluminum Fine Water Breaker Nozzle

Watering tool

Flow: 7 @ 40 PSI
Sizes: Item 480AL
Best for: 480 Aluminum Water Breaker. Stainless steel disk. Micro-fine holes. Wider pattern.

Catalog ↗

Screen-Aire Water Breaker Nozzle

Watering tool

Flow: 18 @ 40 PSI
Sizes: Item 350PL
Best for: The Screen-Aire Water Breaker is designed to water nursery containers with a gentle, concentrated aerated flow of water. A fine-mesh screen and an array of internal components combine air and water to produce a very soft, unrestricted spray. Use a Dramm In-Line Hose Filter to keep the nozzle from clogging. Made in the U.S.A. 3/4 brass threads.

Catalog ↗

1000PL Water Breaker Nozzle

Watering tool

Flow: 8 @ 40 PSI
Sizes: Item 1000PL, 1000PL-N, 1000PL-W
Best for: The 1000PL Redhead water breaker has over 1,000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Use with a Dramm In-Line Hose Filter to prevent clogging. Made in U.S.A. from ABS plastic and stainless steel.

Catalog ↗

750PL Fine Low Flow Water Breaker Nozzle

Watering tool

Flow: 8 @ 40 PSI
Sizes: Item 750PL
Best for: The 750PL Water Breaker has 750 micro-holes for a fine pattern with a slightly reduced flow rate. The 750PL is perfect for light watering with a very soft pattern. Wider pattern.

Catalog ↗

175 micron In-Line Hose Filter

Watering tool

Flow: 10 @ 40 PSI
Sizes: Item ILF-175
Best for: The Dramm In-Line Hose Filter is for use with any Dramm hose nozzle, but highly recommended for the 1000PL Water Breaker and the 350AL Screen Aire. A stainless steel 175 micron (80 mesh) screen filters out unwanted dirt and debris.

Catalog ↗

In-Line Wand Filter Element

Accessory

Flow: element only · 8 @ 40 PSI
Sizes: Item ILFE-175, ILF-080, ILFE-080
Best for: 175 micron element for the ILF-175.

Catalog ↗

Brass Hose Swivel

Hose & fittings

Flow: 18 gpm
Sizes: Item 72700
Best for: The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.

Catalog ↗

Brass Rose - 4 Diameter

Watering tool

Flow: 18-20 @ 40 PSI
Sizes: Item 540B
Best for: Our Brass Rose features an extra wide spray pattern, which allows you to increase the speed of hand watering. Available in a 4-inch diameter. Great for watering bedding plants, pots or market packs. 540B includes protective rubber guard and metric to inch hose thread converter. Made in Germany with 3/4 hose threads.

Catalog ↗

Plastic Fan Nozzle

Watering tool

Flow: 5-7 gpm @ 40 PSI
Sizes: Item 79001
Best for: The Dramm Plastic Fan Nozzle offers a medium flow in a rectangular pattern. Perfect for flats and plug trays.

Catalog ↗

Seedling Nozzle

Watering tool

Flow: 1/2 @ 40 PSI
Sizes: Item 510
Best for: The Seedling Nozzle allows you to water fragile plants, delicate seedlings or plant cuttings. This high-quality nozzle produces an extra fine, hollow cone mist pattern and sprays 1/2 gallon of water per minute. Made in the U.S.A. from solid brass. 3/4 hose threads.

Catalog ↗

Fogg-It Nozzle - Super Super Fine

Mister & fogger

Flow: 1/4 GPM @ 40 {PSI
Sizes: Item 610SSF
Best for: The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates. Made in the U.S.A. from solid brass. 3/4 hose threads. Available in 4 different flow rate sizes.

Catalog ↗

Fogg-It Nozzle - Super Fine

Mister & fogger

Flow: 1/2 GPM @ 40 PSI · 1 GPM @ 40 PSI · 2 GPM @ 40 PSI · 4 GPM @ 40 PSI
Sizes: Item 610SF, 610F, 610L, 610H

Catalog ↗

Adjustable Hose Nozzle

Watering tool

Flow: Variable
Sizes: Item 800
Best for: Our Adjustable Hose Nozzle is great for cleaning walkways, benches, equipment... just about anything! Twist the barrel to adjust the water pattern from a fine, cone-shaped spray to a powerful stream. Twist the barrel back and the water is off. Manufactured in the U.S.A. from brass. 3/4 hose threads.

Catalog ↗

Syphonject

Fertilizer injector

Flow: 7 @ 40 PSI
Sizes: Item 22624
Best for: Syphonject - plastic siphon mixer. Our 20:1 ratio feeder syphons solution using a pressure drop created by the passing stream of water. The Syphonject is made from glass filled polypropylene and is very durable as well as corrosion resistant. An external check valve ensures that water does not fill the solution source and is easy to replace. The Syphonject is perfect for fertilizing and cleaning.

Catalog ↗

Handi-Grip Handle

Watering tool

Sizes: Item 106-G
Best for: The Handi-Grip Handle provides comfort when watering directly from your hose. It is also perfect for using with the Brass Rose or any of the Dramm Water Breakers. The six inch long grip is encased in a padded foam grip. Made in the U.S.A. from aluminum and brass. 3/4 male and female hose threads.

Catalog ↗

Handi-Reach Handle

Watering tool

Sizes: Item 116-G
Best for: Handi-Reach Handles are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, 48, 60 and 72-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male and female hose threads.

Catalog ↗

36 Hanging Basket Handle

Watering tool

Sizes: Item 136-GB
Best for: Hanging Basket Handles offer a 90° curve in the top of handle so you can water directly into a hanging basket. Available in 36 and 48-inch lengths, Use with any 170 series Water Breaker to water hanging baskets and window boxes. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male & female hose threads.

Catalog ↗

48 Hanging Basket Handle

Watering tool

Sizes: Item 148-GB

Catalog ↗

Handi-Reach Color Handle

Watering tool

Sizes: Item 116-GCM, 124-GCM, 130-GCM
Best for: Upgrade to our colorized Handi-Reach Handles. These are the same heavy-duty extension handles as noted above, except they have a super comfortable foam hand grip and come in the color of your choice. Six bright colors are available in 16, 24 or 30-inch lengths. Choose from Red (RD), Orange (OR), Yellow (YL), Green (GN), Blue (BL) or Berry (BY)

Catalog ↗

24 Handi-Reach Handle

Watering tool

Sizes: Item 124-G, 124-GB, 130-G, 136-G, 148-G, 160-G, 10-12370, 22375, 22376

Catalog ↗

Hose Protector

Hose & fittings

Sizes: Item HP-625
Best for: The Hose Protector saves hose ends from unnecessary stress and strain. Utilizing a spring wound around a short length of hose, the Hose Protector connects between the faucet and your hose to prevent hose-end kinking and damage to hose couplings. This handy tool is made from zinc plated steel and heavy-duty, nickel plated brass. The Hose Protector has a 5/8 inch inside diameter. 3/4 inch male & female hose threads.

Catalog ↗

Hose Extender

Hose & fittings

Sizes: Item HE-625
Best for: The Hose Extender is a flexible 24 extension of your hose which can be used with any Dramm water tool. Great for hand watering! Just place our Brass Shut-Off on one end and a 400 Water Breaker on the other. Made in the U.S.A. from reinforced synthetic rubber and heavy-duty brass 3/4 connections. 5/8 inside diameter.

Catalog ↗

Brass Twisty Quick 5/8

Hose & fittings

Sizes: Item 625
Best for: The 625 and 675 Twisty Quick are 1/4 turn quick disconnects with hose barb fittings for use with blunt cut hoses. Secure hose to the fitting with a hose clamp (not provided). Can be used in any combination with 775M and 775F Twisty Quick. Made in Germany from forged brass. Order item 625 for 5/8 ID hose or item 675 for 3/4 ID hose.

Catalog ↗

Brass Twisty Quick 3/4

Hose & fittings

Sizes: Item 675

Catalog ↗

Threaded Brass Twisty Quick - Male

Hose & fittings

Sizes: Item 775M
Best for: The 775M & 775F Twisty Quick are 1/4 turn Quick Disconnects. Makes any threaded hose connection easy to couple/uncouple. Can be used in any combination with 625 & 675 Twisty Quick. Made in Germany from forged brass. 775M - 3/4 male hose thread, 775F - 3/4 female hose thread.

Catalog ↗

Threaded Brass Twisty Quick - Female

Hose & fittings

Sizes: Item 775F

Catalog ↗

Twisty Quick

Hose & fittings

Sizes: Item 710
Best for: Twisty Quick-- plastic quick connect hose adapter. Full water flow design. Our patented design is made from heavy-duty plastic. 3/4 male and female hose threads. Sold as a pair only.

Catalog ↗

Brass Quick Disconnect

Hose & fittings

Sizes: Item 740
Best for: The 740 Brass quick connects offer full flow without water-stop. Made in the USA.

Catalog ↗

QAV Shut-Off Valve

Watering tool

Flow: 13 gpm
Sizes: Item 72318
Best for: The QAV Valve is designed as a high-quality, lower-cost valve. Made in the USA, the QAV uses a unique, patent-pending design to improve strengh and quality while reducing assembly labor.

Catalog ↗

Twin Shut-Off Valve

Watering tool

Flow: 11 gpm
Sizes: Item 235
Best for: Water two places at one time with the 235 Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Molded from high quality ABS plastic. 3/4 male and female hose threads.

Catalog ↗

Brass Twin Shut-Off Valve

Watering tool

Flow: 10 gpm
Sizes: Item 235B
Best for: Water two places at one time with the 235 Brass Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Cast brass with a female swivel for easy attachment.

Catalog ↗

Heavy Duty Plastic Shut-Off Valve

Watering tool

Flow: 18 gpm
Sizes: Item 74
Best for: The 74 Shut-off valve is made from glass filled polypropylene to be very durable and corrosion resistant. More durable than other plastic valves, the 74 is lightweight and offers a full flow.

Catalog ↗

300 Brass Shut-Off Valve

Watering tool

Flow: 17 gpm
Sizes: Item 10-73300
Best for: Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. 3/4 threads.

Catalog ↗

300 Brass Shut-Off Valve w Raised Handle

Watering tool

Flow: 17 gpm
Sizes: Item 10-73302
Best for: Our durable Brass Shut Off but with a raised handle so that it can clear obstructions such as the brass Twisty Quick

Catalog ↗

300 Handle Repair Kit

Accessory

Sizes: Item RK-HRK
Best for: The Handle repair kit replaces the forged handle and includes the valve stem, nyloc nut and stem washer.

Catalog ↗

300 Full Repair Kit

Accessory

Sizes: Item RK-BB
Best for: The Full repair kit replaces all internal components and the handle.

Catalog ↗

Aluminum Shut-Off Valve

Watering tool

Flow: 17 gpm
Sizes: Item 300AL
Best for: The 300AL is exactly the same as the 300 Brass, but made from machined aluminum. Lighter weight that its cousin, it is just as durable. Depending on water quality and other fittings used, corrosion may result.

Catalog ↗

Touch N' Flow Pro

Watering tool

Flow: 11 gpm max
Sizes: Item 65
Best for: The 65 Touch N'Flow Pro Trigger Valve offers durability and high flow in a trigger valve. With 11 gpm output and a long life, the 65 TNF Pro allows for flexibility when watering.

Catalog ↗

Blue Universal Washer

Accessory

Sizes: Item 72999
Best for: Our Blue Universal Washers are a durable replacement washer for any hose fitting. Replace your washer anytime a hose-end connection starts to leak. Each bag contains 100 washers.

Catalog ↗

2 Liter Watering Can

Watering tool

Sizes: Item B2L
Best for: The unique spout design and excellent balance make this watering can perfect for indoor use. Houseplant watering is easy with the far reaching spout. Two liter (1/2 gallon) capacity. Complete with a detachable plastic rose. Made from high-grade, durable plastic in red, yellow, green, and blue. Made in USA.

Catalog ↗

5 Liter Watering Can

Watering tool

Sizes: Item B5L
Best for: Our 5 liter watering can features an extra long spout with a brass rose. The rain-like water pattern arches upward and softly falls upon plants. This gentle sprinkle is unequaled for applying fertilizer to foliage. Detachable brass rose included. Available in red, yellow, green, and blue. 1 1/3 gallon capacity. Made in USA.

Catalog ↗

7 Liter Watering Can

Watering tool

Sizes: Item B7L
Best for: Designed for and used by professional growers for over 100 years. Now manufactured from 1/8 injection molded plastic so they won't rust, leak or corrode. Available in red, yellow, green, and blue. Perfectly balanced for indoor and outdoor use. Comes standard with large plastic rose. 1 3/4 gallon capacity.

Catalog ↗

10 Liter Watering Can

Watering tool

Sizes: Item B10L
Best for: Our largest watering can holds over 2 gallons and is engineered for years of use. A detachable angle spout ensures that your plants receive water where you want it. Perfect for Interior Plantscape professionals. Roses sold separately. Available in red and green. 2 1/2 gallon capacity. Made in Switzerland

Catalog ↗

2 Liter Replacement Rose

Accessory

Sizes: Item 2LR-xx — specify color code: Red (RD), Yellow (YL), Green (GN), Blue (BL)
Best for: Replacement roses and elbows for Dramm Watering Cans. Specify color code when ordering: Red (RD), Yellow (YL), Green (GN), Blue (BL)

Catalog ↗

5 Liter Replacement Rose

Accessory

Sizes: Item 5LR-xx, 7LR-xx, 10LR-xx, 10LS-xx — specify color code: Red (RD), Yellow (YL), Green (GN), Blue (BL)

Catalog ↗

ColorStorm Professional Rubber Hose

Hose & fittings

Sizes: Item -

Catalog ↗

ColorStorm Hose 5/8 in 50 ft

Hose & fittings

Sizes: Item 17003, 17203, 17303, 17999, 17013, 17213, 17313, 17989

Catalog ↗

Nickel Plated, Machined Brass Hose Fittings for ColorStorm Hose

Hose & fittings

Sizes: Item -

Catalog ↗

Male 5/8 Nickel Plated Brass Fitting

Hose & fittings

Sizes: Item MCP20123

Catalog ↗

Female 5/8 Nickel Plated Brass Fitting

Hose & fittings

Sizes: Item MCP20248

Catalog ↗

Male 3/4 Nickel Plated Brass Fitting

Hose & fittings

Sizes: Item MCP20124

Catalog ↗

Female 3/4 Nickel Plated Brass Fitting

Hose & fittings

Sizes: Item MCP20249

Catalog ↗

5/8 Ferrule - brass

Hose & fittings

Sizes: Item 19242

Catalog ↗

3/4 Ferrule - brass

Hose & fittings

Sizes: Item 19178

Catalog ↗

DrammPress Frame

Hose & fittings

Sizes: Item DP-FRAME
Best for: The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.

Catalog ↗

DrammPress 5/8 Jaws

Accessory

Sizes: Item DP-J625, DP-J750
Best for: Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).

Catalog ↗

Fitting/Ferrule Set 5/8 in Male 12 pk

Hose & fittings

Sizes: Item 10-17810
Best for: Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose

Catalog ↗

Fitting/Ferrule Set 5/8 in Female 12 pk

Hose & fittings

Sizes: Item 10-17815

Catalog ↗

Fitting/Ferrule Set 3/4 in Male 12 pk

Hose & fittings

Sizes: Item 10-17820

Catalog ↗

Fitting/Ferrule Set 3/4 in Female 12 pk

Hose & fittings

Sizes: Item 10-17825

Catalog ↗

Splice/Ferrule Set 5/8 in 12 pk

Hose & fittings

Sizes: Item 10-17830, 10-17840

Catalog ↗

Dramm Heavy-Duty Hose Reel

Hose & fittings

Sizes: Item 17400
Best for: The Heavy-Duty Hose Reel provides durable hose management without kinks or twists. Easy to wind and unwind, the reel comes with an adjustable brake to prevent freewheeling and convex sides that prevents pinching against the sides of the reel. A rigid mount and stainless steel axle ensure that there is no flexing or bouncing under the weight of the hose filled with water.

Catalog ↗

Dramm 5 Point Pivot Bracket

Accessory

Sizes: Item 17405
Best for: The 5 Point Pivot Bracket replaces the existing mounting bracket for the Dramm Heavy Duty Hose Reel allowing the reel to pivot 180° and be positioned in one of 5 positions: 0°, 45°, 90°, 135° & 180°.

Catalog ↗

Heavy-Duty Hose Guide

Hose & fittings

Sizes: Item 17410
Best for: The galvanized steel hose guide provides easy hose management, keeping hoses in the aisle and preventing them from knocking over plants. The 6 nylon roller eases hose pulling by reducing resistance.

Catalog ↗

One Touch Valve

Watering tool

Flow: 8 gpm @ 40 psi
Sizes: Item 14700
Best for: The One Touch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering.

Catalog ↗

OneTouch HighFlow Valve

Watering tool

Flow: 16 gpm @ 40 psi
Sizes: Item 74800
Best for: The OneTouch HighFlow valve offers the same, fingertip control of your watering, but with up to 16 gpm.

Catalog ↗

HighFlow Valve

Watering tool

Flow: 16 gpm @ 40 psi
Sizes: Item 22329
Best for: The HighFlow Valve utilizes our unique OneTouch features to increase flow, ease-of-use and connections.

Catalog ↗

Twin HighFlow Valve

Watering tool

Flow: (2) 16 gpm @ 40 psi
Sizes: Item 22320
Best for: The HighFlow Twin utilizes our unique OneTouch design to make spliting water flow from a hose bib easier. A swivel connection makes positioning the valve easy. Large handles make on/off simple.

Catalog ↗

HighFlow 4-way Manifold

Spray stakes & emitters

Flow: (4) 16 gpm @ 40 psi
Sizes: Item 22331
Best for: Split a hose-bib 4 ways with one valve. Easy-to-use handles, swivel connection for simple positioning of the valve. Light blue handles for visibility of valve position.

Catalog ↗

Mini AutoFog

Chemical application

Sizes: Item MLVH-10A · Sizes 120 volt
Best for: Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.

Catalog ↗

Autofog

Chemical application

Sizes: Item SLVH-20A · Sizes 120 volt
Best for: Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use .

Catalog ↗

Large AutoFog

Chemical application

Sizes: Item LVH-20A · Sizes 220 volt
Best for: Treats 30,000 square feet. Treats 70,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use. 240 Volts 60HZ, single phase

Catalog ↗

Air Kit for SLVH and LVH

Accessory

Sizes: Item AF-AIRKIT · Sizes 120 or 220 volt
Best for: The Autofog AirKit is used to connect a fogger head to a customer supplied air compressor and includes a 24v solenoid, an air filter and regulator. The AirKit allows a user to mount their fogger head permanently in the greenhouse. Requires separate control, such as a climate control computer.

Catalog ↗

Stainless Steel Nozzle for MLVH and SLVH Autofog

Accessory

Sizes: Item J753A2 · Sizes 45 ml/min
Best for: For the application of corrosive chemicals with the Autofog. Replaces the standard brass nozzle. Available for all Autofog sizes.

Catalog ↗

Stainless Steel Nozzle for LVH and DLVH Autofog

Accessory

Sizes: Item J754B2 · Sizes 55 ml/min

Catalog ↗

Autofog Annual Maintenance Kit

Accessory

Sizes: Item AF-AMK-xx · Sizes — specify unit: ML, SL or LV
Best for: The Autofog Annual Maintenance Kit includes a collection of components that should be replaced on the Autofog units annually. The kit includes O-Rings and a replacement solution line for the nozzle, an air filter for the compressor and easy to use instructions on how to replace each part as well as calibrate your Autofog nozzle for the next season. Please specify the model when ordering. (ML, SL or LV)

Catalog ↗

Coldfogger 20 gallon

Chemical application

Sizes: Item CFAR-20/150 · Sizes 20 gallon
Best for: The CFAR-20/150 Coldfogger is a low-volume chemical applicator that can easily apply all formulations of pesticides, growth regulators, fungicides, vaccines, cleaning products and disinfectants using a highly concentrated spray solution. The low-volume method of applying chemical solutions diminishes costly run-off and greatly reduces application times. Very small droplets are generated to provide deep and even penetration of chemicals. The large tank holds enough spray solution to provide up to 70,000 sq. ft. of coverage in as little as 70 minutes. The powerful high pressure fog projects a plume of 30-60 micron diameter spray droplets 20 - 25 feet from the hand held spray gun. The quality of spray is a tremendous improvement over conventional hydraulic sprayers that produce droplets that vary in size from 100 - 400 microns. Includes 150 feet of High Pressure Hose and can come with the standard solid rubber tires or the BigFoot pneumatic wheel kit.

Catalog ↗

Coldfogger 50 gallon

Chemical application

Sizes: Item CFAR-50 · Sizes 50 gallon
Best for: The 50 gallon Coldfogger can treat up to 200,000 with one tankload of solution. The CFAR-50 is available with 150' or 300' of high pressure hose and can come with either solid rubber wheels or the BigFoot pneumatic wheel option.

Catalog ↗

Bigfoot Upgrade

Accessory

Sizes: Item — not published by Dramm · Fits CFAR-20 and CFAR-50 Coldfoggers
Best for: The Bigfoot upgrade replaces the Coldfogger's solid rubber wheels and casters with 15 pneumatic wheels and pneumatic casters. This is available on both the CFAR-20 and CFAR-50 versions.

Catalog ↗

150 Foot High Pressure Hose

Chemical application

Sizes: Item 1032587001 · Sizes 150'
Best for: 150 ft high-pressure hose for the Coldfogger, letting the fogger head reach well away from the cart. Item 1032587001 — the 300 ft version is 1045565001.

Catalog ↗

300 Foot High Pressure Hose

Chemical application

Sizes: Item 1045565001 · Sizes 300'
Best for: 300 ft high-pressure hose for the Coldfogger — double the reach of the 150 ft, for treating a long house from one position. Item 1045565001.

Catalog ↗

K-10 Portable PulsFOG

Chemical application

Sizes: Item K-10 · Sizes 25 HP/10 Liter
Best for: For greenhouses. Fogs 10 liters in 45 minutes. Propels fog up to 65 feet.

Catalog ↗

K-10/O Portable Livestock PulsFOG

Chemical application

Sizes: Item K-10/O · Sizes 25 HP/10 Liter
Best for: For livestock or outdoor. For use with oil-based formulations. Fogs 10 liters in 45 minutes. Propels fog up to 65 feet.

Catalog ↗

K-22 Standard PulsFOG

Chemical application

Sizes: Item K-22 · Sizes 50 HP/10 Liter
Best for: For greenhouses. Fogs 10 liters in 30 minutes. Propels fog up to 120 feet.

Catalog ↗

K-22/O Portable Livestock PulsFOG

Chemical application

Sizes: Item K-22/O · Sizes 50 HP/10 Liter
Best for: For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 30 minutes. Propels fog up to 120 feet.

Catalog ↗

K-22 BIO Portable PulsFOG

Chemical application

Sizes: Item K-22 BIO · Sizes 50 HP/2-5 Liter
Best for: For greenhouses or livestock. Safe for heat sensitive products. Fogs 5 liters in 15 minutes. Propels fog up to 120 feet.

Catalog ↗

K-30 Standard PulsFOG

Chemical application

Sizes: Item K-30 · Sizes 100 HP/10 Liter
Best for: For greenhouses. Fogs 10 liters in 15 minutes. Propels fog up to 220 feet.

Catalog ↗

K-30/O Portable Livestock PulsFOG

Chemical application

Sizes: Item K-30/O · Sizes 100 HP/10 liter
Best for: For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 15 minutes. Propels fog up to 220 feet.

Catalog ↗

K-30 Large BIO PulsFOG

Chemical application

Sizes: Item K-30/20 BIO · Sizes 100 HP/2- 55 liter tanks
Best for: For greenhouses or livestock. Safe for heat sensitive products. Fogs 55 liters in 80 minutes. Propels fog up to 220 feet.

Catalog ↗

K-30 Large BIO PulsFOG Dual Start

Chemical application

Sizes: Item K-30/20 BIO-DS · Sizes 100 HP/2- 55 liter tanks
Best for: The Dual Start K-30/20 BIO offers both the Manual Priming Ball and a Push-button, compressor-driven starting mechanism for easier starting

Catalog ↗

K-30 Dual Start Conversion Kit

Accessory

Sizes: Item K-30 DS Conversion · Sizes -
Best for: Convert any K-30/20 to Dual Start. Kit includes instructions for installation. Dramm can also upgrade your unit if sent in for repair

Catalog ↗

K-30 Large Livestock PulsFOG

Chemical application

Sizes: Item K-30/20/O · Sizes 100 HP/55 liter
Best for: For livestock or outdoor use. For use with oil-based formulations. Fogs 55 liters in 80 minutes. Propels fog up to 220 feet.

Catalog ↗

K-40 Large BIO PulsFOG

Chemical application

Sizes: Item K-40 PulsFOG · Sizes 125 HP/2- 55 liter tanks
Best for: For greenhouses or livestock. Safe for heat sensitive products. Fogs 50 liters in 50 minutes. Propels fog up to 300 feet. 100 Liter tanks available.

Catalog ↗

K-50 Large Bio PulsFOG®

Chemical application

Sizes: Item K-50 PulsFOG · Sizes 175 HP/2- 55 Liter tanks
Best for: For greenhouses or livestock. Safe for heat sensitive products. Fogs 50 liters in 30 minutes. Propels fog up to 350 feet. Larger tanks available.

Catalog ↗

K-30/20 Cart

Accessory

Sizes: Item K-30/20C · Sizes -
Best for: For K-30/20 PulsFOG machines. Can handle two 55 liter tanks. Allows for height adjustment and includes handle to turn PulsFOG.

Catalog ↗

K-30/20 Big-Foot Cart

Accessory

Sizes: Item K-30/20C-BF · Sizes -
Best for: Same as K-30/20C but with Big-Foot pneumatic tires and casters.

Catalog ↗

PulsFOG Accessories

Accessory

Sizes: Item Accessories · Sizes -

Catalog ↗

5 Liter Chemical Tank

Accessory

Sizes: Item K-05LCT, K-10LCT, K-55LNR, K-CF, K-GP, K-EP, K-CHP, K-CST, 149 · Sizes 5 liter, 10 liter, 55 liter, -

Catalog ↗

Carrier Solution

Chemical application

Sizes: Item Carrier · Sizes Various
Best for: Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water. For SDS Sheets, click on the MANUAL Link Below.

Catalog ↗

NutriFog - For all chemicals

Chemical application

Sizes: Item NF-20, VK2-5G, VK2-1G, PFC-1G, VK2-55G · Sizes 20 liters, 5 gallons, 1 gallon, 55 gallons
Best for: NutriFOG is a 10-3-3 foliar fertilizer. It can be used with all chemical formulations. It is safe on all ornamentals. 0.25 liters mixed with 1.75 liters of water will treat 10,000 square feet. Do not use more than 5 times in one month on the same crop. Available in 20 liter (5 gallon) containers. NutriFOG Instructions NutriFOG Brochure

Catalog ↗

Turbo ULV 110v

Chemical application

Sizes: Item TULV110 · Sizes 5 liter
Best for: The Turbo ULV 110v Targeted Cold Fogger. The TULV110 offers an adjustable output from 5-11 liters/hour and an adjustable particle size range of 10-100 . Depending on the output and particle size, the TULV110 can propel the fog up to 75 feet.

Catalog ↗

Turbair Electrafan

Chemical application

Sizes: Item TEF-12 · Sizes 12 volt
Best for: · Targeted Low Volume · Perfect for spot treatment · Lightweight, portable machine · 12 v DC · 50-60µ VMD · Covers distances from 10-20 feet The Turbair Electrafan (TEF) is an air assisted spinning disc sprayer for low and ultra-low volume application of insecticides and fungicides in situations with no natural air movement, e.g. indoors. The Electrafan 110 is powered by an A/C electric motor of 110 volts (60hz) and uses a suitable extension cable which allows treatments up to 200 ft. from a power source. The Electrafan 110 can efficiently apply water-based mixtures at both low volumes (normally 8 to 16 liters/acre) and ultra-low volume (ULV) formulations. The Electrafan can be used in glasshouses and polytunnels for the treatment of crops, for pest control in buildings, insect control in animal houses and for applying vaccines to poultry.

Catalog ↗

ULVA+

Chemical application

Sizes: Item ULVA+ · Sizes -
Best for: · Lightweight · Easy to Use · Variable Flow Rate · Charge lasts 40 hours · Powered by 4° D Cell Batteries The ULVA+ is a rotary disk atomizer that applies chemicals evenly both indoors and outdoors. It is designed for use in areas where there is natural air movement. The ULVA+ is perfect for outdoor row crops as well as cut flowers. The ULVA+ produces 50-60° droplets that drift on air currents as they drop, providing even coverage on all plant surfaces. The one liter bottle can treat up to 6,000 square feet with one fill. The ULVA+ uses 4 D cell batteries. Complete with batteries & recharger.

Catalog ↗

Microfit Herbi Standard Lance

Chemical application

Sizes: Item MH-1 · Sizes -
Best for: 6V DC (4-D cell/R20 batteries) Over 40 hours spraying 4 Ft. band width 200-300µ (microns) Droplet size Lightweight, portable machine · Powerpack is interchangeable with Microfit lances The Microfit Herbi, part of the modular Microfit system, is a spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. It can apply CDA formulations or traditional water-based products at total spray volumes of only 5-20 liters/acre. The consistently large spray droplets, of around 250µ (microns), minimize the risk of spray drift and fall in a precise 4 ft. wide circular spray pattern. Herbaflex and Herbi-Twin attachments are available for narrower or wider band widths. The Herbi is used worldwide for band spraying and can treat several acres in one hour. Uses include general clean-up, border, pathway, or strip spraying, and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations offers operator safety advantages.

Catalog ↗

Microfit Herbi Flex Lance

Chemical application

Sizes: Item MHF-2 · Sizes -
Best for: The Herbiflex lance sprays a 4 - 20 inch band spray that is directable. An optional spray shield is available to protect desired plantings.

Catalog ↗

Microfit Herbi Twin Lance

Chemical application

Sizes: Item MHT-3 · Sizes -
Best for: 5.5 - 7.5 Ft. band width Lightweight, portable machine Powerpack is interchangeable with Microfit lances The Microfit Herbi-Twin, part of the modular Microfit system, is a twin-headed, spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. The Herbi-Twin greatly reduces time by doubling the area covered per pass. The twin disks create an adjustable band width of 5.5 - 7.5 ft. for maximum dispersal of chemical. The Herbi-Twin is used for wide band spraying. Uses include pathway or strip spraying (e.g. in orchards and plantations,) and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations (with no mixing required for CDA formulation) offers operator safety advantages. Optional Herbaflex and Herbi lances available. The Microfit Herbi-twin is a low volume sprayer that has a high work rate and is very economical.

Catalog ↗

MSO Pro Sprayer Package

Chemical application

Sizes: Item MSO Pro · Sizes 100 ft hose
Best for: Upgrades the MS20-100 to include a separate agitation system and pressure gauge for better spray accuracy. MSO Pro is available with the standard or BigFoot wheel package.

Catalog ↗

Herbi Power Pak (with bottle)

Chemical application

Sizes: Item PPM-#4 · Sizes -
Best for: Herbi Power Pak with bottle.

Catalog ↗

Herbi Microfit Standard Lance

Chemical application

Sizes: Item LH-1A · Sizes -
Best for: Standard Herbi Microfit Lance.

Catalog ↗

Herbi Microfit Flex lance

Chemical application

Sizes: Item LH-2A · Sizes -
Best for: Herbi Microfit Flex lance.

Catalog ↗

Herbi Microfit Twin Lance

Chemical application

Sizes: Item LHT-3 · Sizes -
Best for: Herbi Microfit Twin Lance.

Catalog ↗

5 Liter Backpack

Chemical application

Sizes: Item 5-LBP · Sizes 5 liter
Best for: 5 Liter Backpack for Microfit Herbiflex sprayers.

Catalog ↗

Herbaflex Spray Shield

Accessory

Sizes: Item 5171A · Sizes 4-20 in

Catalog ↗

MSO - Heavy Duty Sprayer

Chemical application

Sizes: Item MSO · Sizes -
Best for: Fully adjustable pressure- up to 500PSI Adjustable spray pattern & output rates 33' Discharge hose Optional cart Solid bronze pump construction with oiless bearings Durable metal housing 120V AC The Dramm Heavy-Duty sprayer is powerful and compact- designed for every type of chemical application. Model MSO is a hydraulic sprayer with fully adjustable pressures, making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.

Catalog ↗

Gasoline Power Sprayer

Chemical application

Sizes: Item MSO-GAS#2 · Sizes -
Best for: 2-Stroke Engine. Dual Piston Pump with Uniflow Design Minimizes Pump Wear. Bronze & Stainless Steel Pump Construction Adjustable Trigger Spray Gun Oe,Three Pressure Regulator Settings,66 ft Discharge Hose Optional 100ft Hose Available Oe,12 Gallon Aluminum Cart The Dramm MS-Gas sprayer is powerful and compact- designed for every type of chemical application. Powered by a 2-stroke engine for reliability. Model MSO GAS is a hydraulic sprayer with fully adjustable pressures, up to 350psi making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.

Catalog ↗

MSO Sprayer 100' Package

Chemical application

Sizes: Item MS20-100 · Sizes 100 ft hose
Best for: Includes the MSO Sprayer on our MS-20E Cart with 100' of hose and a reel.

Catalog ↗

MSO Sprayer 33' Package

Chemical application

Sizes: Item MS20-33, MS20-100NR, MS-20E, MS-R · Sizes 33 ft hose, 100 ft hose, 20 gallons, -
Best for: Includes the MSO Sprayer with 33' hose on our MS-20E Cart. NOTE: THIS PACKAGE DOES NOT INCLUDE THE REEL.

Catalog ↗

BlueFlex Spray Hose 33'

Chemical application

Sizes: Item BLF25-DH33 · Sizes 1/4 x 33'
Best for: BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 33'. For MSO and MS-Gas Sprayers

Catalog ↗

BlueFlex Spray Hose 100'

Chemical application

Sizes: Item BLF25-DH100 · Sizes 1/4 x 100'
Best for: BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 100' For MSO and MS-Gas Sprayers

Catalog ↗

Trigger-Style Spray Gun

Chemical application

Sizes: Item MS-TG · Sizes 0.5 gpm
Best for: Adjustable Output with On/Off Trigger for MSO, CS-5AGS or MS-GAS

Catalog ↗

Nozzle Orifice for MS-TG Spray Gun

Accessory

Sizes: Item 115427 · Sizes 0.5 gpm
Best for: Nozzle tip for MS-TG Spray Gun. Replace regularly for best results.

Catalog ↗

Nozzle Core for MS-TG Spray Gun

Accessory

Sizes: Item 585338 · Sizes --
Best for: Diffuser for MS-TG Spray Gun. Replace regularly for best results.

Catalog ↗

MSO Pressure Gauge Kit

Accessory

Sizes: Item MPG-KIT · Sizes 0-1500 psi
Best for: Upgrade your MSO with a gauge for more precise measurement of pressure. Kit includes fittings and T and is meant to be placed on the pressure output of the pump, before the hose.

Catalog ↗

Chemdose 2

Chemical application

Sizes: Item CD-2 · Sizes No tank
Best for: The CD-2 is a portable, hose-end unit that connects to either an injector or hydraulic sprayer below 75 psi. This eliminates problems with hose length and power.

Catalog ↗

ChemDose

Chemical application

Sizes: Item CD-120 · Sizes 20 gallons
Best for: The CD-120 Chemdose is a cart mounted precision dosing system. With a 20 gallon tank, an 18 width and a rechargeable battery, the CD-120 is very portable. Includes 3 different wand lengths.

Catalog ↗

ChemDose without cart

Chemical application

Sizes: Item CD-100 · Sizes No tank
Best for: Includes 3 Different Wands: On Bench, Floor, & Hanging Basket; Charger and 25' Hose

Catalog ↗

Hydrosensitive Paper

Chemical application

Sizes: Item HYDPAP · Sizes 10 pack
Best for: Dramm's Hydrosensitive Paper turns blue when it comes into contact with water or oil. Very useful for showing the deposit of spray particles and for training new applicators.

Catalog ↗

Hydra Sprayer - 50 gallon

Chemical application

Sizes: Item HYDRA · Sizes 120 volt
Best for: Years of experience have culminated in Dramm's Hydra Sprayer line. The Hydra offers larger hose lengths, greater flow rates and larger tanks. The Hydra line is easy-to-use with features such as a convex reel to prevent birdnesting and a specialized agitation system to keep even stubborn powders in suspension.

Catalog ↗

Hydra Sprayer - 50 gallon - Corrosion Resistant Fittings

Chemical application

Sizes: Item HYDRA-CRF · Sizes 120 volt
Best for: Upgrade to corrosion resistant fittings for the Hydra 50 gallon sprayer.

Catalog ↗

Hydra SprayTrax - 50 Gallon

Chemical application

Sizes: Item HYDRAG-ST50 · Sizes 50 gal
Best for: The 50 gallon Hydra SprayTrax is available in either gasoline or electric. The unit comes with a variety of hose lengths (150', 200' 250') on a variable tension drag, locking reel. The SprayTrax cart is designed for maximum manueverability with tracking axles that both turn. The SprayTrax can turn 360° within 7'. The HydraSprayTrax is available with either an electric motor or a 5.5 HP Honda gasoline motor.

Catalog ↗

Hydra SprayTrax - 100 Gallon

Chemical application

Sizes: Item HYDRAG-ST100 · Sizes 100 gal
Best for: The 100 gallon Hydra SprayTrax is available as either gasoline or electric. Electric start option is available on the Honda 5.5HP engine. The larger platform allows for additional reel options cantilevered off the rear of the unit.

Catalog ↗

Hydra 200 G - 200 Gallon Sprayer

Chemical application

Sizes: Item HYDRA200G · Sizes 200 gal
Best for: The Hydra200G is available as either gasoline or electric. The large platform allows for up to two reels (gas only) and a second, smaller tank for smaller jobs. Click for more information.

Catalog ↗

Spraytrax Electricwind

Chemical application

Sizes: Item ELECW · Sizes Up to 300'
Best for: The Dramm Electricwind for the Hydra Spraytrax 100 offers push button winding of the spray hose at a variable rate of speed.

Catalog ↗

Spraytrax RemoteWind

Chemical application

Best for: The Dramm RemoteWind Reel for the Hydra SprayTrax 100 offers motorized, remote winding of the reel from the end of the hose at a variable rate of speed.

Catalog ↗

Hydra Trigger Gun

Chemical application

Sizes: Item MS40-TG · Sizes -
Best for: Adjustable Output for Hydra Sprayers. Adjusts from a straight stream to a fine cone with an easy to use lever. Comes standard with the Hydra line of sprayer. Various nozzle tips are available.

Catalog ↗

1.0 mm Nozzle Tip

Accessory

Sizes: Item MS40-TG10 · Sizes 1.0 mm

Catalog ↗

Drench Adaptor for Hydra Sprayer

Accessory

Sizes: Item MS40-DA · Sizes 24 in
Best for: The Dramm Drench Adaptor works with the Hydra line of sprayers to offer drenching capabilities with a familiar tool. Consisting of a 24 Aluminum Handi-Reach Handle, a 170AL Water Breaker Nozzle, a Dramm 300 Brass Shut-Off Valve and a male, stainless steel quick connect, the Drench Adaptor allows a quick switch to drenching from spraying.

Catalog ↗

Adjustable Stainless Steel Spray Gun

Chemical application

Sizes: Item MD-9 · Sizes -

Catalog ↗

Extension Lance

Accessory

Sizes: Item L-5TQC · Sizes 0.5 gpm
Best for: 5 jet spray lance with trigger for MSO, CS-5AGS, MS-GAS, Hydra or BP-4. Provides a fine spray perpendicular to the wand. Great for extended reach applications like hanging baskets, wide benches or vertical crops. 1/4 turn valve provides flow control while trigger is an easy on/off. Compressed 28 in, extends to 41 in. Fixed lance widths available in 24, 36, 42 and 48 lengths.

Catalog ↗

Female Stainless Steel Quick Connect

Chemical application

Sizes: Item 220301 · Sizes -
Best for: Female Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi

Catalog ↗

Male Stainless Steel Quick Connect

Chemical application

Sizes: Item 220300 · Sizes -
Best for: Male Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi

Catalog ↗

BlueFlex Spray Hose 150'

Chemical application

Sizes: Item BLF25-DH150 · Sizes 1/4 x 150'
Best for: BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 150' For HYDRA, MSO and MS-Gas Sprayers

Catalog ↗

BlueFlex Spray Hose 200'

Chemical application

Sizes: Item BLF375-DH200 · Sizes 3/8 x 200'
Best for: BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 200' For Hydra Sprayers

Catalog ↗

BlueFlex Spray Hose 250'

Chemical application

Sizes: Item BLF375-DH250 · Sizes 3/8 x 250'
Best for: BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 250' For Hydra Sprayers

Catalog ↗

Battery Operated Backpack Sprayer with Li Swappable Battery

Chemical application

Sizes: Item BP-4Li · Sizes 4 gallons
Best for: The BP-4Li offers completely variable pressure from 10-150psi and a swappable Makita 3 ah Lithium Ion battery. Like its predecesor, the BP-4Li provides a powerful spray with fine droplets. The unit comes with a twin fan nozzle and a conical bullet nozzle. Other nozzle options are available. Additional batteries are available for purchase. Operating time on one battery is 45 min.

Catalog ↗

Single Fan Nozzle for BP-4

Accessory

Sizes: Item 112866 · Sizes 0.3 gpm
Best for: Single fan nozzle and body for the BP-4 / BP-4Li Backpack Sprayer. Allows for more precise control of chemical applications.

Catalog ↗

Twin Nozzle for BP-4

Accessory

Sizes: Item BP4-TN · Sizes 0.5 gpm
Best for: Twin nozzle bar with coarse spray for sprenching and herbicide application.

Catalog ↗

Foam 8L Compression Foamer

Chemical application

Sizes: Item FOAM8L · Sizes 5 L capacity
Best for: The FOAM8L is a foamer that uses compressed air to make a rich foam. Like a compression sprayer, you hand pump the FOAM8L but, leave a reservoir of air in the tank. This air mixes with the solution to create the foam. Requires the use of foamable products.

Catalog ↗

FM20 Cart Mounted Foamer

Chemical application

Sizes: Item FM20-25 · Sizes 20 gallon
Best for: The FM20 Foamer connects to your compressor to create a rich, aerated foam that will adhere to vertical surfaces and persist, improving contact time.

Catalog ↗

FM20 Cart Mounted Foamer with BigFoot Wheel Kit

Chemical application

Sizes: Item FM20-25-BF · Sizes 20 gallon
Best for: FM20-25 Foamer with pneumatic 15 turf tires and outrigger pneumatic casters.

Catalog ↗

FM50 Cart Mounted Foamer

Chemical application

Sizes: Item FM50-25 · Sizes 50 gallon
Best for: The FM50 uses the same foaming system as the smaller units but with a 50 gallon tank on our HydraCart Frame. The FM50 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi.

Catalog ↗

FMST50 SprayTrax Foamer 50 gallon

Chemical application

Sizes: Item FMST50-25 · Sizes 50 gallon
Best for: Foamer on 50 gallon SprayTrax Cart. The FMST50 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi. Optional hose reels are available for units with longer lengths of hose.

Catalog ↗

FMST100 SprayTrax Foamer 100 gallon

Chemical application

Sizes: Item FMST100-25 · Sizes 100 gallon
Best for: Foamer on 100 gallon SprayTrax Cart. The FMST100 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi.

Catalog ↗

50 ft x 5/8in Hose

Chemical application

Sizes: Item FM17003 · Sizes 50 ft x 5/8in
Best for: 50 ft x 5/8in Hose for Larger Dramm Foamers

Catalog ↗

75 ft x 3/4in Hose

Chemical application

Sizes: Item FM17213 · Sizes 75 ft x 3/4in
Best for: 75 ft x 3/4in Hose for Larger Dramm Foamers - Requires more than 5 CFM to operate.

Catalog ↗

TracFOG PTO Driven Fast Fogger 400 AutoValve

Chemical application

Sizes: Item TF400A · Sizes 400 liter (100 gal)
Best for: The TracFOG PTO driven fast fogger is a tractor mounted fogger that creates ultra-fine particles and propels them hundreds of feet. The TracFOG400 has a 400 liter (100 gallon) tank and two directable nozzles. The new Autovalve version includes solenoids to control each nozzle as well as a pneumatic directional reversal.

Catalog ↗

TracFOG PTO Driven Fast Fogger 400 Greenhouse Vegetable

Chemical application

Sizes: Item TF400GV · Sizes 400 liter (100 gal)
Best for: The TracFOG 400GV is like the standard unit but with much taller nozzle masts allowing the nozzles to be aimed above greenhouse vegetable crops. The GV unit does not have the automatic nozzle system.

Catalog ↗

TracFOG PTO Driven Fast Fogger 100 Autovalve

Chemical application

Sizes: Item TF100A · Sizes 100 liter (25 gal)
Best for: The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full.

Catalog ↗

TracFOG PTO Driven Fast Fogger 100 Greenhouse Vegetable

Chemical application

Sizes: Item TF100GV · Sizes 100 liter (25 gal)
Best for: The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full. The TF100GV has taller booms to be able to reach above tall vine crops.

Catalog ↗

TracFOG Single Nozzle Extension

Accessory

Sizes: Item TF-EXT · Sizes 24 Length
Best for: The TracFOG nozzle extensions attach to the nozzle base to extend the length of the nozzle by 24. This allows for the nozzle outlet to be placed closer to openings in doorways for fogging of difficult areas for tractors to enter.

Catalog ↗

Ferticart 20 gallon

Fertilizer injector

Sizes: Item FC20-DT · Sizes 20 gallon
Best for: 20 gallon Injector cart with corrosion free vinyl dipped cart for Dosatron injectors

Catalog ↗

Ferticart 3 - 7 gallon

Fertilizer injector

Sizes: Item FC3X7-DT · Sizes 3 - 7gallon
Best for: The FC3X7 offers three separate 7 gallon tanks, plumbed to allow easy switching between different solutions.

Catalog ↗

Watercart 20 gallon

Chemical application

Sizes: Item WC20 · Sizes 20 gallon
Best for: 20 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.

Catalog ↗

Watercart 50 gallon

Chemical application

Sizes: Item WC50 · Sizes 50 gallon
Best for: 50 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.

Catalog ↗

Ferticart 100 Gallon with Agitation

Fertilizer injector

Sizes: Item FCST100-A · Sizes 100 gallon
Best for: The FCST100-A Ferticart offers battery operated agitation in a larger format. Battery lasts from 8-12 hours with normal use. Versions available to fit the Dosatron D45 and D8R range of injectors.

Catalog ↗

Aeration/Agitation Bucket

Chemical application

Sizes: Item AAB120V · Sizes 5 gallon
Best for: The Aeration/Agitation Bucket keeps various solutions in suspension with or without aeration. Perfect for fertilizers, insecticides, fungicides, PGRs and nematodes

Catalog ↗

Cordset for 12v Operation of AAB120V

Accessory

Sizes: Item AAB12VCORD · Sizes 5' cord
Best for: For use with the AAB120V Aeration Bucket. Replaces the 120v transformer included with the AAB120V and connects to a 12VDC battery (not included) to convert to bucket to battery power. For use with customer provided 12VDC battery of any size to allow for use uncorded.

Catalog ↗

Ferticart 50 Gallon with Aeration/Agitation for the D40 Injector

Fertilizer injector

Sizes: Item FC50-A-D40 · Sizes 50 Gallon
Best for: The FC50-A-D40 offers 50 gallons of stock solution and larger plumbing for use with the D40 Dosatron injector for up to 40 gpm. The FC50-A has AC powered agitation using our specialized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate the stock solution to help keep nematodes happy as they wait for application.

Catalog ↗

Ferticart 50 Gallon with Aeration/Agitation for the D45 Injector

Fertilizer injector

Sizes: Item FC50-A-D45 · Sizes 50 Gallon
Best for: The FC50-A-D45 offers 50 gallons of stock solution and larger plumbing for use with the D45 Dosatron injector for up to 20 gpm. The FC50-A has AC powered agitation using our specialized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate the stock solution to help keep nematodes happy as they wait for application.

Catalog ↗

MistTime Misting Controller

AC Controller

Sizes: Item MT-10 · Sizes 10 Output · Colors -
Best for: The Dramm MistTime Controller is perfect for time or temperature based control of misting valves. With the ability to program each valve independently, the MistTime offers unmatched flexibility. Each valve is operated on a cycle. The timing is variable with the duration operating between 1 second and 60 minutes and the interval time operating between 1 minute and 12 hours. Each valve can be run continuously, between specific times, or even started when the temperature rises above a set point. With the ability to program each valve independently, the controller can operate as a time based mist controller, a pulse-irrigation controller and a mist cooling controller at the same time. In addition, the MistTime offers the option to convert the last valve output to a pump pre-start output. When configured in this manner, the operator is given an option to pre-start a pump prior to any valve operation. The pre-start time is variable. This ensures that the system is properly pressurized when the mist system is in operation. The MistTime is easy to program using a keypad to navigate the menu and enter amounts. For flexibility, the MistTime can be programmed in English, Spanish, French or Dutch. The MistTime operates on 120vAC or 220vAC and includes a 24vAC output. The unit is enclosed in a NEMA 4 rated PVC housing and is easy to wire and install.

Catalog ↗

ProLine Irrigation Controller - 4 Station (expandable)

AC Controller

Sizes: Item PL1600-04 · Sizes 4 output · Colors -
Best for: The ProLine Irrigation Controller offers advanced control features such as multiple program operation, master valve, multiple start times per day, manual operation, and an option to add cellular connectivity to monitor and modify irrigation operation from your phone.

Catalog ↗

ProLine Irrigation Controller - 8 Station (expandable)

AC Controller

Sizes: Item PL1600-08, PL1600-12, PL1600-12B, PL1600-16, PL1600-20, PL1600-24, PL-1600-M4, PL-1600-M12, PL-420LS · Sizes 8 output, 12 output, 12 output (base), 16 output, 20 output, 24 output, 4 output module, 12 output module, - · Colors -

Catalog ↗

RainPro 4 Output Expansion Module

AC Controller

Sizes: Item RPIC-M4 · Sizes 4 Outputs · Colors -
Best for: The RainPro has been discontinued. However, we still have 4 output modules to upgrade existing units. This module fits into open slots in the RainPro 03, 07 and 11 version to add 4 outputs to increase the capacity of the unit.

Catalog ↗

Villa Wirelessly Programmed Irrigation Controller

AC Controller

Sizes: Item WFVILLA-06, WFVILLA-12 · Sizes 6 Outputs, 12 Outputs · Colors -
Best for: The Villa Irrigation Controller brings smart features to your watering. The unit can be programmed via the onboard display, a Bluetooth enabled phone (iOS or Android) or via a web browser.

Catalog ↗

350mm HAF Fan

AC Controller

Sizes: Item 350/4 · Sizes 350mm
Best for: The Dramm AME Horizontal Air Flow (HAF) Fans offer efficiency, flexibility, and simplicity. Utilizing an aerodynamic design and a high-efficiency motor, the AME fan is equipped to maximize the air flow potential of any situation. When combined with speed controllers, the AME Fans offer unmatched flexibility in air flow as plants grow and mature. Because of their shrouded, aerodynamic design and high-efficiency motor, Air Movement Efficiency (AME) fans cover greater distances with better, more even air speeds. The AME Fan design provides leverage for air movement. The result is not only increased forward propulsion but a pull from behind the fan as well. This helps to even air speeds by creating momentum throughout the house. The result is fewer fans needed and an increase in efficacy and reduction in electrical costs. The Dramm AME Horizontal Air Flow System performs best when sized to fit a particular situation. Dramm technical personnel take into account many different variables in each greenhouse before designing a customized layout. To have a layout prepared for your greenhouse please contact your Dramm Technical Representative. The AME fans and Controllers can be connected to an external climate control computer for automated speed regulation.

Catalog ↗

400mm HAF Fan

AC Controller

Sizes: Item 400/4 · Sizes 400mm

Catalog ↗

5 AMP AME Fan Controller

AC Controller

Sizes: Item PS-05 · Sizes 5 AMP
Best for: The Dramm PS-05 Variable Power Station offers control without computer inputs. This lower cost version of our controller range provides speed control by use of the knob only.

Catalog ↗

Pick-Up Stix

Specialized tool

Sizes: Item PSTX · Sizes 30 in · Colors Silver
Best for: Jumbo tweezer tool for liter pick up. Aluminum and plated steel with comfort grip.

Catalog ↗

Hanging Basket Remover

Specialized tool

Sizes: Item HBR · Sizes 36 Handle · Colors Silver
Best for: Comes with 10 in diameter ring and 36 rod to conveniently remove hanging baskets from hard-to-reach areas above! Rings also available for 8 or 12 inch pots. Rod also available in 60 in or 84 in lengths.

Catalog ↗

8 in dia Hanging Basket Remover Ring

Accessory

Sizes: Item R-HB-8C, R-HB-10C, R-HB-12C, HBRP-3, HBRP-5, HBRP-7 · Sizes 8 in Ring, 10 in Ring, 12 in Ring, 36 in Rod, 60 in Rod, 84 in Rod · Colors Silver, Aluminum
Best for: Hanging Basket Remover Ring 8 in diameter only

Catalog ↗

ColorWear Half Apron

Specialized tool

Sizes: Item 19020 · Sizes Half size · Colors 3 colors
Best for: The ColorWear Apron is great for gardening, landcaping, interiorscaping and garden center workers. A unique center mesh zippered pocket holds deadheads and yard debris, unzipping to dump. Other pockets store tools. Keeps you clean while you work.

Catalog ↗

ColorPoint Compact Shear

Specialized tool

Sizes: Item 18010 · Sizes Compact · Colors 6 colors
Best for: Perfect for quick cutting and deadheading. Small compact design for comfortable use. Six colors so everyone gets their color choice.

Catalog ↗

ColorPoint Compact Pruner

Specialized tool

Sizes: Item 18020 · Sizes Compact · Colors 6 colors
Best for: Perfect for small woody cutting. Small compact design for comfortable use. Six colors allows for personalization while pruning.

Catalog ↗

ColorPoint Holster

Accessory

Sizes: Item 19010 · Sizes Compact · Colors Black
Best for: Fits Compact Shear and Pruner. Clips to belt. Leatherette base to protect blade.

Catalog ↗

ColorPoint Lopper

Specialized tool

Sizes: Item 18050 · Sizes 24 in. · Colors 6 colors
Best for: SK5 Steel, Lightweight Aluminum Handle. Comfortable rubber grips. Six colors for stylish pruning. Incredibly sharp. Replaceable blades.

Catalog ↗

ColorPoint Hydroponic Shear Stainless Steel

Specialized tool

Sizes: Item 18037 · Sizes 3 in. Blade · Colors Yellow
Best for: Little Buddy Hydroponic Shear with durable stainless steel blades.

Catalog ↗

ColorPoint Hydroponic Shear Titanium

Specialized tool

Sizes: Item 18033 · Sizes 3 in. Titanium Coated Blade · Colors Yellow
Best for: Little Buddy Hydroponic Shear with titanium coated stainless steel blades to resist sap buildup.

Catalog ↗

JetFog Barbed Nozzle

Mister & fogger

Sizes: Item JFSB · Sizes -
Best for: JetFog low-pressure fog nozzle with a barbed inlet, for pushing straight onto tube. Item JFSB — order JFST instead if the line is threaded.

Catalog ↗

JetFog Threaded Nozzle

Mister & fogger

Sizes: Item JFST · Sizes -
Best for: JetFog low-pressure fog nozzle with a threaded inlet, for screwing into a fitting or riser. Item JFST — order JFSB instead for barbed tube.

Catalog ↗

JetFog 2 way Barbed

Mister & fogger

Sizes: Item JFB2 · Sizes -
Best for: Two outlet nozzle with barbed inlet. Flow rate is 11.6 lph (3 gph).

Catalog ↗

JetFog 4 way Barbed

Mister & fogger

Sizes: Item JFSB4 · Sizes -
Best for: Four outlet nozzle with barbed inlet. Flow rate is 23.2 lph (6 gph).

Catalog ↗

JetFog 5 way Barbed

Mister & fogger

Sizes: Item JFSB5 · Sizes -
Best for: Five outlet nozzle with barbed inlet. Flow rate is 29 lph (7.5 gph).

Catalog ↗

JetFog 4 way Threaded

Mister & fogger

Sizes: Item JFST4 · Sizes -
Best for: Four outlet nozzle with threaded inlet. Flow rate is 23.2 lph (6 gph).

Catalog ↗

JetFog 5 way Threaded

Mister & fogger

Sizes: Item JFST5 · Sizes -
Best for: Five outlet nozzle with threaded inlet. Flow rate is 29 lph (7.5 gph).

Catalog ↗

Replacement Nozzle for JetFog

Accessory

Sizes: Item JF-525 · Sizes -
Best for: Replacement nozzle tip for JetFog nozzle. Press-fit connection.

Catalog ↗

Blank Nozzle for JetFog

Accessory

Sizes: Item JF-524 · Sizes -
Best for: Blank nozzle tip to prevent spray from any JetFog outlet. Press-fit connection.

Catalog ↗

2 way cross for JetFog

Mister & fogger

Sizes: Item JF-2CROSS · Sizes -
Best for: Two way cross for JetFog Nozzle. Press fit connection.

Catalog ↗

4 way cross for JetFog

Mister & fogger

Sizes: Item JF-4CROSS · Sizes -
Best for: Four way cross for JetFog Nozzle. Press fit connection.

Catalog ↗

Replacement ADV Diaphragm for JetFog

Accessory

Sizes: Item JF-560 · Sizes -
Best for: Replacement diaphragm for JetFog Anti Drip Device. Silicone. Use JF-WRENCH-C to access diaphragm and reseat new diaphragm.

Catalog ↗

JetFOG Nozzle Service Kit

Accessory

Sizes: Item JF-KIT · Sizes kit
Best for: Includes JF-WRENCH & BLANK tool, 10 BLANK6, 5 JF-525, 3 JF-524, 5 JF-560

Catalog ↗

JetFOG Wrench Tool w/ JetFOG Seat Tool

Accessory

Sizes: Item JF-WRENCH-C · Sizes -
Best for: Combo set for disassembling and reassembling JetFOG nozzles easily.

Catalog ↗

PolyRail 16mm Aluminum Extrusion

Bench & tubing support

Sizes: Item ALU16 · Sizes 12' section
Best for: PolyRail aluminum extrusion tightly sleeves PE tubing keeping it rigid, without sags. PolyRail keeps nozzles straight and even, ensuring the best coverage for your irrigation system. Installs easily without glue.

Catalog ↗

PolyRail 25mm Aluminum Extrusion

Bench & tubing support

Sizes: Item ALU25 · Sizes 12' section
Best for: 25mm (3/4) diameter. For higher flow and more support. 25mm PolyRail may be used to hang baskets

Catalog ↗

PolyRail Connecting Band

Bench & tubing support

Sizes: Item ALU501CB · Sizes 4 inch
Best for: Connecting band with set screws. 4 length. Connects two rail pieces together.

Catalog ↗

PolyRail 90 deg Hanger 16mm

Bench & tubing support

Sizes: Item ALU500PH · Sizes 16mm
Best for: Right-angle hanger that carries 16 mm PE tubing off the PolyRail extrusion. Item ALU500PH — the 25 mm hanger is ALU500-90.

Catalog ↗

PolyRail 90 deg Hanger 25mm

Bench & tubing support

Sizes: Item ALU500-90 · Sizes 25mm
Best for: Right-angle hanger for 25 mm PE tubing on the PolyRail extrusion. Item ALU500-90 — the 16 mm hanger is ALU500PH.

Catalog ↗

PolyRail Top Hanger

Bench & tubing support

Sizes: Item ALU502H · Sizes Top
Best for: Hanger rides on Rail to position PE outlet towards the bottom of the Rail.

Catalog ↗

PolyRail Stop

Bench & tubing support

Sizes: Item ALU541S · Sizes -
Best for: Stop used at both ends of each irrigation run. Includes set screw.

Catalog ↗

PolyRail Punch 25mm

Bench & tubing support

Sizes: Item ALU503A · Sizes 25mm
Best for: Punch sized for 25 mm PolyRail tubing. Item ALU503A — use ALU509A on 16 mm.

Catalog ↗

PolyRail Punch 16mm

Bench & tubing support

Sizes: Item ALU509A · Sizes 16mm
Best for: Punch sized for 16 mm PolyRail tubing, so the hole matches the fitting instead of being stretched to suit. Item ALU509A — use ALU503A on 25 mm.

Catalog ↗

PolyRail Bench Riser Base

Bench & tubing support

Sizes: Item ALUSB · Sizes -
Best for: Base for PolyRail Bench Riser Support

Catalog ↗

PolyRail Bench Riser Cap

Bench & tubing support

Sizes: Item ALUSC · Sizes -
Best for: Cap for top of PolyRail Bench Riser Support

Catalog ↗

White JetRain Barbed

Micro-sprinkler

Sizes: Item JRLPC-B-WH · Sizes .48 gpm
Best for: JetRain overhead and mist nozzle, white, barbed inlet. Dramm list the white and blue at the same 0.48 gpm, with red at 0.79 gpm and yellow at 1.37 gpm — so the colour identifies the nozzle at a glance across a house rather than encoding a different flow between these two. Item JRLPC-B-WH.

Catalog ↗

Blue JetRain Barbed

Micro-sprinkler

Sizes: Item JRLPC-B-BL · Sizes .48 gpm
Best for: JetRain overhead and mist nozzle, blue, barbed inlet. Listed at the same 0.48 gpm as the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-B-BL.

Catalog ↗

Red JetRain Barbed

Micro-sprinkler

Sizes: Item JRLPC-B-RD · Sizes .79 gpm
Best for: JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For mist and irrigation.

Catalog ↗

Yellow JetRain Barbed

Micro-sprinkler

Sizes: Item JRLPC-B-YL · Sizes 1.37 gpm
Best for: JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For heavier irrigation.

Catalog ↗

JetRain Barbed Nozzle

Micro-sprinkler

Sizes: Item JR-B · Sizes -
Best for: JetRain Nozzle Barbed with no Check Valve Barbed Inlet

Catalog ↗

White JetRain Threaded

Micro-sprinkler

Sizes: Item JRLPC-T-WH · Sizes .48 gpm
Best for: JetRain overhead and mist nozzle, white, threaded inlet for a fitting or riser. 0.48 gpm, the same as the blue; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-WH.

Catalog ↗

Blue JetRain Threaded

Micro-sprinkler

Sizes: Item JRLPC-T-BL · Sizes .48 gpm
Best for: JetRain overhead and mist nozzle, blue, threaded inlet. 0.48 gpm, matching the white; red is 0.79 gpm and yellow 1.37 gpm. Item JRLPC-T-BL.

Catalog ↗

Red JetRain Threaded

Micro-sprinkler

Sizes: Item JRLPC-T-RD · Sizes .79 gpm
Best for: JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For mist and irrigation.

Catalog ↗

Yellow JetRain Threaded

Micro-sprinkler

Sizes: Item JRLPC-T-YL · Sizes 1.37 gpm
Best for: JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For heavier irrigation.

Catalog ↗

JetRain Threaded Nozzle

Micro-sprinkler

Sizes: Item JR-T · Sizes -
Best for: JetRain Nozzle Threaded with no Check Valve Threaded Inlet

Catalog ↗

JetRain 180 deg Nozzle Complete Barbed

Micro-sprinkler

Sizes: Item JRLPC180-B-x, JRLPC180-T-x, JRC180-xx, JR180-xx — specify color when ordering
Best for: JetRain 180 deg Pattern Barbed - Choose a color

Catalog ↗

JetRain Replacement Pin (specify color)

Accessory

Sizes: Item JR-P-xx — specify color when ordering
Best for: Replacement pin are specific to each nozzle. Please specify color when ordering.

Catalog ↗

JetRain Cleanout ADV Barbed LP

Micro-sprinkler

Sizes: Item JR-807L · Sizes -
Best for: Low-pressure JetRain cleanout with an automatic drain valve, barbed inlet — flushes the line and drains it down at shut-off. Item JR-807L; the threaded version is JR-808L.

Catalog ↗

JetRain Cleanout ADV Threaded LP

Micro-sprinkler

Sizes: Item JR-808L · Sizes -
Best for: Low-pressure JetRain cleanout with an automatic drain valve, threaded inlet. Item JR-808L; the barbed version is JR-807L.

Catalog ↗

JetRain On/Off Valve

Micro-sprinkler

Sizes: Item JRBV-750 · Sizes -
Best for: Add to a JetRain assembly to turn individual nozzles on and off.

Catalog ↗

2 lph Drip Assembly - 18 in.

Spray stakes & emitters

Sizes: Item PCAS2L-18 · Sizes 18 in

Catalog ↗

2 lph Drip Assembly - 24 in.

Spray stakes & emitters

Sizes: Item PCAS2L-24, PCAS2L-36, PCAS2L-48 · Sizes 24 in, 36 in, 48 in

Catalog ↗

2 lph (1/2 gph) Pressure Compensated Emitter Barbed - Black Insert

Spray stakes & emitters

Sizes: Item PCAS2L · Sizes 2 lph
Best for: 2 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter PressFit - Green Insert

Spray stakes & emitters

Sizes: Item PCAS4L · Sizes 4 lph
Best for: 4 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Catalog ↗

4 lph (1 gph) Pressure Compensated Emitter Barbed - Green Insert

Spray stakes & emitters

Sizes: Item PCAS4L-B · Sizes 4 lph
Best for: 4 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Catalog ↗

8 lph (2 gph) Pressure Compensated Emitter PressFit - Red Insert

Spray stakes & emitters

Sizes: Item PCAS8L · Sizes 8 lph
Best for: 8 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Catalog ↗

12 lph (3 gph) Pressure Compensated Emitter PressFit - Black Insert

Spray stakes & emitters

Sizes: Item PCAS12L · Sizes 12 lph
Best for: 12 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Catalog ↗

Barrel to barb Adaptor

Spray stakes & emitters

Sizes: Item MAN1 · Sizes 1 outlet 3mm barb
Best for: Connect barrel outlet emitters to 192 tubing with this adaptor.

Catalog ↗

2 Way Manifold

Spray stakes & emitters

Sizes: Item MAN2 · Sizes 2 outlet 3mm barb
Best for: Two-outlet manifold on 3 mm barbs — splits one dripper feed to two pots. Item MAN2; the four-outlet is MAN4.

Catalog ↗

4 Way Manifold

Spray stakes & emitters

Sizes: Item MAN4 · Sizes 4 outlet 3mm barb
Best for: Four-outlet manifold on 3 mm barbs — one dripper feeds four pots, which is what makes a multi-outlet assembly worth fitting. Item MAN4; the two-outlet is MAN2.

Catalog ↗

Slim Weight - Zinc Aluminum Alloy

Spray stakes & emitters

Sizes: Item PCASW · Sizes 11 Gram

Catalog ↗

18 in. - 0.191 in. Tubing

Spray stakes & emitters

Sizes: Item 191-18, 191-24, 191-36, 191-42, 191-48 · Sizes 18 in., 24 in., 36 in., 42 in., 48 in.

Catalog ↗

4 in. dia Pressure Compensated Dribble Ring

Spray stakes & emitters

Sizes: Item PCR4-24, PCR4-36, PCR4-48, PCR6-12, PCR6-24, PCR6-36, PCR6-48, PCR85-12, PCR85-24, PCR85-36, PCR85-48, PCR10-12 (+7 more) · Sizes 24 in. tube, 36 in. tube, 48 in. tube, 12 in. tube

Catalog ↗

Anchor Stake for Rings

Spray stakes & emitters

Sizes: Item S3ANCHOR · Sizes 6
Best for: The S3ANCHOR holds dribble rings in the pot, keeping them optimally placed for best water distribution.

Catalog ↗

T connector for Dramm PC Rings.

Spray stakes & emitters

Sizes: Item T-PIECE · Sizes -
Best for: The T-Piece has two barbed, secure connections and one smooth connection to allow for the ring to be easily disconnected.

Catalog ↗

1/4 in Microvalve

Spray stakes & emitters

Sizes: Item MTMV-25 · Sizes 1/4 in barbs
Best for: Barbed Microvalve for drip irrigation. Allows individual pressure compensated drippers to be turned off.

Catalog ↗

3mm Barbed Fitting

Spray stakes & emitters

Sizes: Item BARB3 · Sizes 3mm

Catalog ↗

3mm Plug for mistakes

Accessory

Sizes: Item BLANK3 · Sizes 3mm
Best for: Plug for mistakes when using the 3mm barbed fitting.

Catalog ↗

Multi-Tool for Irrigation

Specialized tool

Sizes: Item ML-TOOL · Sizes Multi
Best for: Multi-tool for irrigation installation. Cuts PE, punches holes with 3,4,5 mm blades. Inserts barbed components into PE.

Catalog ↗

3mm Punch for 16mm or 1/2 Tubing

Specialized tool

Sizes: Item PUNCH1650 · Sizes 3mm
Best for: Easy-to-use 3mm Punch for 16mm or 1/2 Tubing

Catalog ↗

3mm Replacement blade for PUNCH1650

Accessory

Sizes: Item PUNCH1650-B · Sizes 3mm
Best for: Replaces standard blade when worn.

Catalog ↗

45 deg. Angle Stake 4 in.

Spray stakes & emitters

Sizes: Item ST-45 · Sizes 4 in.

Catalog ↗

45 deg. Angle Labyrinth Stake 4 in.

Spray stakes & emitters

Sizes: Item LST4-45 · Sizes 4 in.

Catalog ↗

Easyclean 45 deg. Angle Labyrinth Stake

Spray stakes & emitters

Sizes: Item ECLST-45, ECLST · Sizes 4 in.
Best for: The Easyclean Labyrinth Stake places the labyrinth inside of the stake body. Simply unthread and clean to remove any debris or algae buildup. Works with any standard multi-outlet drip irrigation system

Catalog ↗

Easyloc Inline Valve

Spray stakes & emitters

Sizes: Item ITVSL16 · Sizes 16mm x 16mm
Best for: Easyloc Inline Valve 16mm x 16mm. Shuts off PE line. Insert as needed. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Easyloc Inline Valve & Fitting

Spray stakes & emitters

Sizes: Item ITV075SL16 · Sizes 16mm x 3/4in
Best for: Easyloc Inline Valve 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Easyloc Fitting

Spray stakes & emitters

Sizes: Item ITF075SL16 · Sizes 16mm x 3/4in
Best for: Easyloc Fitting 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Easyloc Tee

Spray stakes & emitters

Sizes: Item ITTSL16 · Sizes 16mm
Best for: Easyloc Tee 16mm. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Easyloc Elbow

Spray stakes & emitters

Sizes: Item ITESL16 · Sizes 16mm
Best for: Easyloc Elbow 16mm. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Easyloc Coupling

Spray stakes & emitters

Sizes: Item ITCSL16 · Sizes 16mm
Best for: Easyloc Coupling 16mm. Barb & Compression nut. Needs no additional clamp.

Catalog ↗

Figure 8 Clamp

Spray stakes & emitters

Sizes: Item 600AP8 · Sizes 16mm
Best for: Figure 8 clamp to close 16mm PE ends.

Catalog ↗

Pin-Perfect Nozzle

Micro-sprinkler

Sizes: Item PPN-GN, PPN-GR, PPN-BL, PPN-RD, PPN-OR, PPN-BK · Sizes 2.65 mm, 2.75 mm, 2.80 mm, 2.95 mm, 3.05 mm, 3.25 mm · Colors Green, Grey, Blue, Red, Orange, Black

Catalog ↗

Pin-Perfect Nozzle Replacement Pin

Accessory

Sizes: Item PPNP-360 · Sizes - · Colors -
Best for: Replacement pin for the Pin-Perfect Nozzle. The color of the pin designates the nozzle output rate. Replace pins with the same color as the original pin color. The diameter of the orifice in the black body of the Pin-Perfect Nozzle determines the flow rate for that nozzle. All pins have the same diameter and do not affect flow rate. Specify two letter color code when ordering.

Catalog ↗

180° Pin-Perfect Nozzle Pin

Accessory

Sizes: Item PPNP-180 · Sizes - · Colors -
Best for: The Dramm 180° Pin replaces any color pin on the Pin Perfect Nozzles. This allows for a 180° pattern without changing nozzles. As the flow rate for the Pin Perfect Nozzle is controlled by the diameter of the nozzle body. The 180° Pin offers a 180° pattern without changing the flow. Color: black.

Catalog ↗

360° Nifty Nozzles

Micro-sprinkler

Sizes: Item 360NN-GN, 360NN-GR, 360NN-BL, 360NN-RD, 360NN-OR · Sizes 2.00 mm, 2.25 mm, 2.50 mm, 2.75 mm, 3.00 mm · Colors Green, Grey, Blue, Red, Orange

Catalog ↗

Assembly Insert

Accessory

Sizes: Item AI · Sizes - · Colors -
Best for: An Assembly Insert is a threaded gasket that provides a quick installation and leak-free seal for Dramm Irrigation Nozzles. The interior female thread is 3/8 Whitworth, the same thread specification used on the Pin-Perfect, Nifty, Misty Mist and Drop style nozzles. To Install, use a 7/16 drill bit to drill holes into schedule 40 PVC pipe, aluminum pipe or galvanized pipe. Caution: Do not use schedule 80 PVC. The Assembly Insert will not be able to create an effective seal due to the wall thickness of the schedule 80 PVC pipe. Install the Assembly Insert into the hole and then screw in the nozzle. The width of the nozzle expands the Assembly Insert as it is screwed into place, creating a leak-free seal without having to drill and tap every hole. Pipes should be clamped and drilled using a drill press or alignment jig to ensure perfectly round holes and straight alignment. Recommended for use at operating pressures up to 50 PSI.

Catalog ↗

Misty Mist Nozzle

Mister & fogger

Sizes: Item MM-RW, MM-KW · Sizes 1.25 mm, 1.50 mm · Colors Red / White, Black / White

Catalog ↗

High Pressure Misty Mist Nozzle

Mister & fogger

Sizes: Item HP-GW · Sizes 0.75 mm · Colors Grey / White
Best for: The High Pressure Misty Mist delivers an ultra fine spray, ideal for mist cooling and raising humidity levels. These nozzles create a 10 foot diameter spray pattern. High Pressure Misty Mist Nozzles should only be installed on the topside of the pipeline. Bottom side installations are not recommended due to the high pressures involved. Space nozzles 10 feet apart with the pipeline suspended as high as possible in the middle of each bay, without interfering with the spray pattern of the nozzle. There is no need to worry about overlapping spray patterns since the goal is to evaporate water into the air versus allowing the water to drop to the soil. Please note that high pressure pumps and filtration equipment are required for these nozzles to work properly. High Pressure Misty Mist Nozzles can not be installed using Assembly Inserts. Threads must be tapped directly into the water pipeline, use the drill & tap installation method explained at the end of this section. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use High Pressure 360° Misty Mist Nozzles in combination with Dramm Run-Out Valves to control water drip.

Catalog ↗

Drop Inversion Nozzle

Micro-sprinkler

Sizes: Item DDI-GG · Sizes 2.25 mm · Colors Grey / Grey
Best for: Due to a special spinning mechanism which increases the spray diameter of the Drop Inversion Nozzle, it is perfect for 24 foot wide quonset/ tunnel houses. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Inversion Nozzles produce a 360° 24 foot diameter spray pattern and must be installed on the bottom side of the pipeline with No-Drip Extension Check Valves. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Inversion Nozzles produce a 24 foot diameter spray pattern. Space each nozzle 12 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 24 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Inversion Nozzles in combination with Dramm Run-Out Valves and No-Drip Extension Check Valves to control water drip.

Catalog ↗

Drop Upright Nozzle

Micro-sprinkler

Sizes: Item DDU-GB · Sizes 2.25 mm · Colors Grey / Black
Best for: The Drop Upright Nozzle has a unique spinning mechanism which increases the spray diameter of this nozzle to 30 feet when your water pipeline is 5 feet above the crop. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Upright Nozzles produce a 360° 36 foot diameter spray pattern and must be installed on the topside of the pipeline or on top of 1/2 PVC risers. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Upright Nozzles produce a 30 foot diameter spray pattern. Space each nozzle 15 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 30 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use Drop Upright Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

Catalog ↗

T-Drop Nozzle

Micro-sprinkler

Sizes: Item TDN · Sizes 1.75 mm · Colors Brown / Red
Best for: The T-Drop Nozzle was created for long narrow installations in which an elliptical spray pattern is desired. T-Drop Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip. To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop and nozzles installed on the topside of your pipeline, T-Drop Nozzles will produce a 10 foot by 5 foot elliptical spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 5 feet apart for complete coverage. To increase the spray diameter of the T-Drop to 12 feet by 6 feet, install the nozzles on the bottom side of the pipeline and space the nozzles at 6 foot intervals. Multiple pipelines should be spaced 6 feet apart for complete coverage. Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first. Use T-Drop Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

Catalog ↗

Nozzle Plug

Accessory

Sizes: Item PLUG · Sizes Universal · Colors White
Best for: Oops! Did you drill one too many holes? Use the Dramm Nozzle Plug to cap off unwanted holes without replacing entire pipelines. Install as you would any other Dramm Nozzle or unscrew the unwanted Pin-Perfect, Nifty or Misty Mist Nozzle and simply replace it with the Nozzle Plug. Order a few extra, we won't tell. Item Number: PLUG

Catalog ↗

36 Pin-Perfect Hanging Nozzle Assembly

Micro-sprinkler

Sizes: Item HNP-xx-36 · Sizes 36 inch — specify nozzle color
Best for: The Dramm Hanging Nozzle system combines the superior flow rates and water patterns of Dramm nozzles with the flexibility of a below basket hanging irrigation system. Designed for misting or irrigation of crops on benches or on the ground, the Hanging Nozzle system uses the familiar Dramm nozzles with our No Drip Extension Check Valve and a leader tube. Hanging nozzle systems offer solutions to the traditional problems of rigid pipe mounted irrigation systems. Hanging nozzle systems use a check valve and hang below the lateral which prevents dripping from the nozzle or the shadow, dripping from the lateral. Dramm Hanging Nozzle Assemblies offer even watering. Gravity ensures that the nozzles are plumb preventing pattern distortion. The entire assembly includes a leader tube with a barb fitting. The system uses flexible polyethylene tubing instead of PVC for ease of use and flexibility. A variety of leader tube lengths and nozzle choices are available. For flow rates see the specific nozzles. To install a Dramm Pin-Perfect Hanging Nozzle System. Space the nozzle assemblies at 3' spacings. Choose a leader tube length that places the nozzles below the hanging baskets or at a height of at least 3' above the crop. Choose a Pin-Perfect Nozzle to suit your needs taking into account the flow rate of each nozzle and the flow rate of the lateral.

Catalog ↗

48 Pin-Perfect Hanging Nozzle Assembly

Micro-sprinkler

Sizes: Item HNP-xx-48, HNP-xx-60 · Sizes 48 inch, 60 inch — specify nozzle color

Catalog ↗

180° Nylon Nozzle

Micro-sprinkler

Sizes: Item 180NY-RD · Sizes - · Colors Red
Best for: 180° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 90° Nylon Nozzle.

Catalog ↗

90° Nylon Nozzle

Micro-sprinkler

Sizes: Item 90NY-GR · Sizes - · Colors Grey
Best for: 90° spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 180° Nylon Nozzle.

Catalog ↗

No-Drip Riser

Bench & tubing support

Sizes: Item NDR · Sizes - · Colors -
Best for: Riser with a no-drip mechanism that shuts as pressure falls, so the nozzle does not dribble onto the crop after the cycle ends. Item NDR.

Catalog ↗

No-Drip Extension with Check Valve

Bench & tubing support

Sizes: Item NDECV · Sizes - · Colors -
Best for: No-drip riser extension with a check valve fitted — adds height and stops backflow down the riser. Item NDECV. Use the plain NDR riser where no extension is needed.

Catalog ↗

Run-Out Valve

Bench & tubing support

Sizes: Item ROV · Sizes - · Colors -
Best for: Run-Out Valves are designed to be installed at the end of 1-inch or 3/4-inch PVC pipelines. When the water is turned off, the Run-Out Valve will open and allow water to run out of the line, eliminating drip from all overhead nozzles. Run-Out Valves require at least 15 PSI to work properly. Use PVC cement and a 1 to 3/4 PVC reducer bushing to connect Run-Out Valves to 3/4-inch PVC pipelines. Follow the PVC cement directions regarding pipe preparation and drying times.

Catalog ↗

Threaded Pipe Nipple

Bench & tubing support

Sizes: Item PN-2010 · Sizes - · Colors -
Best for: The Threaded Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to 1/2 PVC pipe risers. To install, simply screw the Threaded Pipe Nipple onto the threaded 1/2 PVC pipe riser. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 threaded PVC risers.

Catalog ↗

Slip Fit Pipe Nipple

Bench & tubing support

Sizes: Item PN-2020 · Sizes - · Colors -
Best for: The Slip Fit Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to straight (unthreaded) 1/2 PVC pipe risers. To install, use PVC cement to attach the Slip Fit Pipe Nipple onto PVC pipe risers. Follow the PVC cement directions regarding pipe preparation and drying times. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 straight PVC risers.

Catalog ↗

Drill Tap 3/8 Whitworth Thread

Bench & tubing support

Sizes: Item DT-N · Sizes - · Colors -
Best for: Creates a 3/8 Whitworth thread in PVC for Pin-Perfect, Nifty or Misty Mist Nozzles.

Catalog ↗

3/4 Kwik Klamp

Bench & tubing support

Sizes: Item KK-75 · Sizes 3/4 in · Colors -
Best for: The Kwik Klamp is a bracket with a hinged clip that can open and close. This handy device locks shut when closed, but can be opened to remove or replace pipelines. The Kwik Klamp makes pipe installation fast and easy. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 diameter pipes. Metric and additional inch sizes are available upon special order. Use with the Kwik Spacer.

Catalog ↗

1 Kwik Klamp

Bench & tubing support

Sizes: Item KK-100, KK-125, KK-150, KK-200 · Sizes 1 in, 1.25 in, 1.5 in, 2 in · Colors -

Catalog ↗

3/4 Kwik Spacer

Bench & tubing support

Sizes: Item KS-75 · Sizes 3/4 in · Colors -
Best for: The Kwik Spacer slides into the Kwik Klamp and is used to create additional space between the pipe and wall. Multiple Kwik Spacers can be combined to create varying lengths in 3/4 increments. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 Kwik Klamps. Metric and additional inch sizes are available upon special order.

Catalog ↗

1 Kwik Spacer

Bench & tubing support

Sizes: Item KS-100, KS-125, KS-150, KS-200 · Sizes 1 in, 1.25 in, 1.5 in, 2 in · Colors -

Catalog ↗

On Dribble Tube

Bench & tubing support

Sizes: Item DTS-18, DTS-24, DTS-30, DTS-36, DTS-42, DTS-48, DTS-60, DTM-12, DTM-18, DTM-24, DTM-30, DTM-36 (+11 more) · Sizes 18 in, 24 in, 30 in, 36 in, 42 in, 48 in, 60 in, 12 in · Colors Green Tubing, Brown Tubing, Blue Tubing

Catalog ↗

Dramm Stix

Bench & tubing support

Sizes: Item SS-16, SS-24, SS-30, SS-36 · Sizes 16 in, 24 in, 30 in, 36 in · Colors -

Catalog ↗

Dribble Ring for 6 & 7 Containers

Spray stakes & emitters

Sizes: Item DR4-24, DR4-36, DR4-48, DR6-12, DR6-24, DR6-36, DR6-48, DR85-12, DR85-24, DR85-36, DR85-48, DR10-12 (+7 more) · Sizes 24 in, 36 in, 48 in, 12 in, 12, 24, 36, 48 · Colors -

Catalog ↗

Universal Hand Pick Tool

Specialized tool

Sizes: Item HPT · Sizes - · Colors -
Best for: The Dramm Hand Pick Tool is used for the insertion of Dramm Brass Eyelets into poly tubing for the use of Dramm Dribble Tubes and Rings. Place an eyelet onto the tip of the Handpik tool and push firmly into the black poly tubing. The Hand Pick Tool will pierce the poly tubing and insert the brass eyelet in one leak-free operation!

Catalog ↗

Brass Eyelet

Bench & tubing support

Sizes: Item DTMS-E · Sizes .060 or .045 ID · Colors -
Best for: Brass eyelet. Used to install Dramm Dribble Tubes and Dribble Rings.

Catalog ↗

Poly Tubing -.045 ID X .100 OD

Poly tubing

Sizes: Item O45 · Sizes 5,000 feet/ roll · Colors Green
Best for: Small leader tube for Dramm Dribble Tubes.

Catalog ↗

Poly Tubing -.060 ID X .100 OD

Poly tubing

Sizes: Item O6O · Sizes 5,000 feet/ roll · Colors Brown
Best for: Medium leader tube for Dramm Dribble Tubes.

Catalog ↗

Poly Tubing - .075 ID X .125 OD

Poly tubing

Sizes: Item O75 · Sizes 5,000 feet/ roll · Colors Blue
Best for: Large leader tube for Dramm Dribble Tubes.

Catalog ↗

Poly Tubing - .130 ID X .192 OD

Poly tubing

Sizes: Item 192 · Sizes 2,500 feet/ roll · Colors Black

Catalog ↗

3/4 in NPT Dramm Solenoid Valve

AC solenoid valve

Sizes: Item SVB075 · Sizes 3/4 in - 24VAC 1.2 W · Colors -
Best for: Dramm's ultra-durable solenoids are designed to outlast the competition and shut-off rapidly. Perfect for misting systems, where an extra second or two is more water than needed, the SVB range of solenoids are fast acting.

Catalog ↗

1 in NPT Dramm Solenoid Valve

AC solenoid valve

Sizes: Item SVB100, SVB150, SVB200 · Sizes 1 in - 24VAC 1.2 W, 1.5 in - 24VAC 1.2 W, 2 in - 24VAC 1.2 W · Colors -
Best for: Dramm Solenoid Valve - 1 National Pipe Thread

Catalog ↗

Polyethylene Irrigation Line

Poly tubing

Sizes: Item PE tubing · Sizes 16mm or 25mm · Colors -
Best for: Dramm PE tubing is available in 16mm and 25mm (3/4) in various lengths. Call for sizing and pricing.

Catalog ↗

Valve Station

Bench & tubing support

Sizes: Item Valve Station · Sizes - · Colors -
Best for: Dramm offers preassembled valve stations as well as multi line manifolds. Build with easy maintenance in mind, Dramm pre assembled PVC components make irrigation system installation easy. Talk to Dramm about designing your irrigation system today and include Dramm pre assembled system components.

Catalog ↗

ii ri Smart Controller w Coil

DC Controller

Sizes: Item iiri3v · Sizes 3/4 in. valve · Colors -
Best for: The ii ri Smart Controller is a battery operated, Bluetooth Connected, irrigation/misting controller that can oprate one solenoid valve without wiring. Create different programs on your smartphone and upload them to your ii ri easily to change scenarios. Great for quick installations, single propagation benches, outdoor mum fields and more.

Catalog ↗

ii ri Smart Controller on 3/4 in. Solenoid

DC Controller

Sizes: Item iiriSVB075, iiriSVB100 · Sizes 3/4 in. valve, 1 in. valve · Colors -
Best for: Ii ri Smart Controller including 3/4 solenoid valve.

Catalog ↗

6 AMP AME Fan Controller

AC Controller

Sizes: Item PS-06 · Sizes 6 AMP
Best for: Speed controller for AME HAF fans, rated 6 amp — the smallest of the three, for a short run of fans. Item PS-06. Step up to PS-10 or PS-20 as the fan count grows.

Catalog ↗

10 AMP AME Fan Controller

AC Controller

Sizes: Item PS-10 · Sizes 10 AMP
Best for: Speed controller for AME HAF fans, rated 10 amp — the mid capacity. Item PS-10.

Catalog ↗

20 AMP AME Fan Controller

AC Controller

Sizes: Item PS-20 · Sizes 20 AMP
Best for: Speed controller for AME HAF fans, rated 20 amp — the largest, for a full house of fans on one circuit. Item PS-20.

Catalog ↗

Single Stage Thermostat

AC Controller

Sizes: Item T41 · Sizes 12-240v
Best for: The Dramm Microfan mechanical thermostats are designed with rough environments in mind. These high quality thermostats are perfect for any situation where harsh conditions may damage less durable equipment. Protected in sealed PVC housings, these thermostats offer stainless steel coiled sensors and accuracy to 1° C. The SPDT (Single Pole Double Throw) switch contact (one set of contacts open on temperature rise as the other set closes) is a no load contact and offers superior accuracy. Designed to be placed in the area to be controlled, the Dramm Microfan Thermostats are perfect for heating, cooling, and ventilation control in greenhouses, factory buildings, warehouses, farms or anywhere requiring accuracy in control. Two different thermostats are available: the T41-SV Single-Stage and the T42-SV Double-Stage Thermostat. Both are CSA approved and available in Canada.

Catalog ↗

Two Stage Thermostat

AC Controller

Sizes: Item T42 · Sizes 12-240v

Catalog ↗

Floraplus 2 72 in

Watering tool

Sizes: Item FP2-72X100, FP3-72X100, FP2-48X100, FP3-48X100, FP2-96X100 · Sizes 72 in, 48 in, 96 in · Colors -
Best for: Floraplus 2 (1L/m2 - cap mat & PP ground cover) 72 x 100' Roll

Catalog ↗

Vivaplus 2 72 in

Watering tool

Sizes: Item VP2-72X100, VP3-72X100, VP2-48X100, VP3-48X100, VP2-96X100 · Sizes 72 in, 48 in, 96 in · Colors -
Best for: Vivaplus 2 (3L/m2 - cap mat & PP ground cover)) 72 x 100' Roll

Catalog ↗

Aquafol Filter Cloth 79in

Watering tool

Sizes: Item AFW-79X164, AFW-48X100 · Sizes 79 in, 48 in · Colors -
Best for: Aquafol Filter Cloth - White 79 x 164' Roll

Catalog ↗

Strand Dripper 12lph - 18 in Tube

Spray stakes & emitters

Sizes: Item ST18-A112, ST24-A112, ST30-A116, ST42-A116, ST30-A124, ST42-A124, STP12-A208, STP18-A208, STP18-A212, STP24-A212, STP30-A216, STP42-A216 (+2 more) · Sizes 18 in, 36 in, 42 in, 30 in, 12 in, 24 in · Colors -
Best for: Strand Dripper 12 lph flow rate with 18 inch perforated tube.

Catalog ↗

Gauge Test Kit

Specialized tool

Sizes: Item GN3020K · Sizes - · Colors -
Best for: Kit to test pressures in irrigation system. Includes portable gauge, 1 punch tool, 5 needles, 5 barb adaptors, 5 threaded adaptors

Catalog ↗

Gauge Needle Adaptor X Barb (5 pack)

Accessory

Sizes: Item GN3020-B, GN3020-T, GN3021-025 · Sizes barb, 1/4 in MIPT, 1/4 in FIPT · Colors -
Best for: Barbed Adaptors to test PE Line pressures

Catalog ↗

S10 - 1/2MPT ADPT-GREEN PLATE-nozzle select

Micro-sprinkler

Sizes: Item N-12884-11XX · Sizes - · Colors -
Best for: #10,11,12,13,14,15,16,17,18,20 - Green #1, Black#2, Gray#3

Catalog ↗

R10 Rotator - 1/2MPT ADPT-RED PLATE-nozzle select

Micro-sprinkler

Sizes: Item N-9913-11XX · Sizes - · Colors -
Best for: #40, 45, 50, 55, 60 - Red #1 , White #2, Orange #7

Catalog ↗

R2000WF Rotator - 1/2MPT ADPT-BLUE PLATE-nozzle select

Micro-sprinkler

Sizes: Item N-9928-10XX · Sizes - · Colors -
Best for: #10,11,12,13,14,15,16,18,20 - Blue #10, Purple #12, Green #14, Red #16, Yellow #18, Brown #20 Purple, Ivory

Catalog ↗

D10 - 1/2MPT ADPT-GRN PLATE-nozzle select

Micro-sprinkler

Sizes: Item N-12928-10XX, N-9914-13XX, N-12927-11XX, N-9929-10XX, N-13827-12XX · Sizes - · Colors -
Best for: #10,11,12,13,14,15,16,17,18,20 - Standard flat Black plate

Catalog ↗

Road Guard- Orange (R2000WF, R2000LP)

Accessory

Sizes: Item N-12213-001 · Sizes - · Colors -

Catalog ↗

Abot/Riser Base 1.5

Bench & tubing support

Sizes: Item A-050-001-607 · Sizes 1.5 in · Colors -
Best for: The Abot Riser base connects laterals to risers.

Catalog ↗

Male End Fitting 1.5

Bench & tubing support

Sizes: Item A-050-001-616 · Sizes 1.5 in · Colors -

Catalog ↗

Female End Fitting 1.5

Bench & tubing support

Sizes: Item A-050-001-517 · Sizes 1.5 in · Colors -

Catalog ↗

Riser Pipe (Black) ED x20inch

Bench & tubing support

Sizes: Item A-032-032-450 · Sizes - · Colors -
Best for: 20 inch riser section for PipeLoc. Threads into Riser Base and connects to other riser pipes to reach desired nozzle height.

Catalog ↗

Abot/Riser Base 2

Bench & tubing support

Sizes: Item A-063-001-607, A-075-001-607, A-090-001-607, A-050-050-621, A-063-063-623, A-075-050-624, A-075-063-625, A-075-075-626, A-090-050-627, A-090-063-628, A-090-075-629, A-090-090-630 (+43 more) · Sizes 2 in, 2.5 in, 3 in, 1.5 in, 2.5 in/1.5 in, 2.5 in/2 in, 3 in/1.5in, 3in/2in, 3in/2.5in, 3 in/2 in (+3 more) · Colors -

Catalog ↗

Galcon

GSI Cloud

AC Controller

Connection: Cellular to the GSI cloud; web and app interface; weather-resistant casing
Sizes: Up to 24 valves + master · up to 2 irrigation heads/lines · 2 water meters per head · up to 7 digital and 5 analog inputs
Best for: Their top cloud controller. Up to 10 fertigation programs and 4 fertigation channels per irrigation head with EC/pH control, plus filtration management, flow control and condition programming. Alarm notifications, weather service, history logs, a third-party API and a direct API into Sentek IrriMAX Live for soil-moisture-driven scheduling

Catalog ↗

Galileo Cloud Open Field

DC Controller

Connection: Cloud app; drives fertigation machines with EC/pH control and remote terminal units over radio or wireline
Sizes: Up to 50 main irrigation lines · 200 irrigation devices · 100 water meters · up to 40 local fertilizer pumps · up to 7 different fertilizers
Best for: The big-site system — a hierarchical network of up to 50 mainlines rather than a single head. Opens and closes irrigation capacity gradually to stop pressure spikes, and caps flow to the pipework so a bottleneck cannot be exceeded. One water meter can be shared across many valves while each still operates individually, which saves a meter per valve on a large block

Catalog ↗

GSI PRO (AC)

AC Controller

Connection: Cellular; smartphone and computer control from anywhere
Sizes: Agricultural scale; outdoor enclosure
Best for: Total irrigation and fertigation control with the precision of the AG series and the reach of the cloud platform. The current generation of the GSI line — The GSI-PRO AC build — 24 VAC 50/60 Hz from the grid.

Catalog ↗

GSI PRO (DC)

DC Controller

Connection: Cellular; smartphone and computer control from anywhere
Sizes: Agricultural scale; outdoor enclosure
Best for: Total irrigation and fertigation control with the precision of the AG series and the reach of the cloud platform. The current generation of the GSI line — The GSI-PRO DC build — lithium batteries, or a solar panel with rechargeable batteries.

Catalog ↗

GSI AG Series (AC)

AC Controller

Connection: Cellular, no software to install; outdoor waterproof enclosure; connects to terminal units by one-way radio
Sizes: Up to 24 valves + master valve · 8 irrigation programs (series), unlimited starts per day
Best for: Proportional or precision quantity fertigation with an automatic filter-flush program, on quantity, time or weather-based scheduling. Over-the-air software updates, multi-user authorisation hierarchy, real-time alarms by email or push, and detailed irrigation and water-consumption logs. Works with valves already in the ground — The AC build — powered from the electricity grid.

Catalog ↗

GSI AG Series (DC)

DC Controller

Connection: Cellular, no software to install; outdoor waterproof enclosure; connects to terminal units by one-way radio
Sizes: Up to 24 valves + master valve · 8 irrigation programs (series), unlimited starts per day
Best for: Proportional or precision quantity fertigation with an automatic filter-flush program, on quantity, time or weather-based scheduling. Over-the-air software updates, multi-user authorisation hierarchy, real-time alarms by email or push, and detailed irrigation and water-consumption logs. Works with valves already in the ground — The DC build — lithium battery, rechargeable from a solar panel or from the grid.

Catalog ↗

GALPRO Series (AC)

AC Controller

Connection: AC or DC models — battery or grid powered
Sizes: 4 or 8 irrigation valves + fertilizer pump and master filter · connects to 4 water meters · 3 conditional inputs · alarm output
Best for: Quantity-based irrigation with flow-rate control and proportional fertigation, sized for small plots, orchards and greenhouse ranges rather than a whole farm. Filter wash program built in. The DC build runs where there is no power at the head — The AC build — grid electricity powered.

Catalog ↗

GALPRO Series (DC)

DC Controller

Connection: AC or DC models — battery or grid powered
Sizes: 4 or 8 irrigation valves + fertilizer pump and master filter · connects to 4 water meters · 3 conditional inputs · alarm output
Best for: Quantity-based irrigation with flow-rate control and proportional fertigation, sized for small plots, orchards and greenhouse ranges rather than a whole farm. Filter wash program built in. The DC build runs where there is no power at the head — The DC build — battery powered, for plots with no electricity at the head.

Catalog ↗

80024 Series

AC Controller

Connection: Mains powered; rain sensor and dry-contact temperature/humidity sensor inputs
Sizes: 8–24 valves · programs split by series A, B, C · irrigation duration 1 minute to 9 hours
Best for: Modular zone control with a time-based fertigation program and an auxiliary program for lighting or any other independent electrical output — useful where the same panel has to run photoperiod lighting as well as water. Weekly or cyclic scheduling from once a day to once a month, a delay function out to 240 days, and seasonal adjustment of run time by percentage

Catalog ↗

8000 Series — Outdoor

AC Controller

Connection: 24 V powered; outdoor waterproof enclosure; suits a broad range of valves and solenoids; NC rain sensor input
Sizes: 6, 9 or 12 valves, each separately programmable · two valves can irrigate concurrently
Best for: Explicitly rated by Galcon for greenhouse misting and for cooling poultry and cattle sheds — the S8000 model does seconds-based irrigation and minute-interval cycles, which is what misting needs and what a standard station timer cannot do. Multiple cycles per day with a large number of activations

Catalog ↗

8000 Indoor

AC Controller

Connection: 24 V powered, indoor installation; NC rain sensor input; smartphone control on the 8000BT
Sizes: 4 or 6 valves, each separately programmable · two valves can irrigate concurrently
Best for: The indoor build of the 8000 — same seconds-based irrigation and high activation counts on the S8000 model, same suitability for greenhouse misting, in a smaller 4 or 6 valve frame for a panel inside the headhouse

Catalog ↗

6200 Series

DC Controller

Connection: 9 V battery; suits two-wire or three-wire solenoids
Sizes: DC6 up to 6 valves · DC9 up to 9 valves · DC12 up to 12 valves · IP 54
Best for: Battery control for 6 to 12 valves where there is no power — the practical option on an outlying block. Seconds-based irrigation and minute-long cycles on the S model, time-based fertigation on the F11, and smartphone control

Catalog ↗

6100 Series

DC Controller

Connection: 9 V battery; dry-contact sensor input to halt irrigation on rain, temperature or humidity
Sizes: 1–6 valves · IP 68 — waterproof for outdoor or valve-box installation
Best for: IP 68 means it survives a flooded valve box, which is where these usually die. One to six valves on battery, with seconds-based irrigation and minute-long cycles on the S model and time-based fertigation on the F11

Catalog ↗

7000 Series

DC Controller

Connection: Battery powered with low-battery alarm and manual mechanical opening; rain sensor input; smartphone control on 7101BT
Sizes: Includes a hydraulic valve, ¾" to 2" · model 7001D single line · all 7101 models IP 68
Best for: Controller and valve as one unit for a single line — a run of sprinklers or one long drip lateral — so there is no separate solenoid to wire. IP 68 on the 7101 models for pit installation, and a manual mechanical override to open the valve by hand when needed

Catalog ↗

GSI Gardening Series (AC)

AC Controller

Connection: Cellular with built-in antenna; DC model on rechargeable lithium with solar or grid charging, AC model mains powered; outdoor waterproof enclosure
Sizes: Up to 24 valves + master valve · 8 irrigation programs (series), unlimited starts per day
Best for: The landscape and turf version of the GSI platform — percentage-based fertigation, water-meter connection, weather-station interface and controllers shown on a map, which matters when one crew looks after many sites. Over-the-air updates and real-time alarms — The AC build — powered from the electricity grid.

Catalog ↗

GSI Gardening Series (DC)

DC Controller

Connection: Cellular with built-in antenna; DC model on rechargeable lithium with solar or grid charging, AC model mains powered; outdoor waterproof enclosure
Sizes: Up to 24 valves + master valve · 8 irrigation programs (series), unlimited starts per day
Best for: The landscape and turf version of the GSI platform — percentage-based fertigation, water-meter connection, weather-station interface and controllers shown on a map, which matters when one crew looks after many sites. Over-the-air updates and real-time alarms — The DC build — lithium battery, rechargeable from a solar panel or from the grid.

Catalog ↗

Heron Electric

Fertiliser & Acid Dosing

Fertilizer injector

Best for: In-line dosing with booster pump or feedback control, and buffer-tank dosing, under Heron controller management

Catalog ↗

pH Dosing Systems

Fertilizer injector

Best for: Direct acid dosing or circulating acid injection for water-storage tank acidification

Catalog ↗

HM-Pro Multi-Wire Controller

AC Controller

Connection: 2 pump outputs · 4 inputs as standard (start, stop, weather station, flow meter) · up to 4 valves in parallel on one output
Sizes: Expandable by plug-in card to 96 valves with one expansion, 144 with two
Best for: Plug-in cards let you buy the valve count you need now and add more later rather than replacing the controller. Large graphical display with menu-driven operation. Integrates with Heron sensors or a full weather station, so irrigation can run off light, temperature, rainfall, soil moisture, wind direction or a calculated ET value — and moisture sensors can sit out in the crop. Dosing systems tie in directly. A hybrid version runs on mains or battery

Catalog ↗

HT-Pro Two-Wire Decoder Controller

AC Controller

Connection: 1, 2 and 4 output decoders · 2 pump outputs with extremely high surge protection · 4 inputs (start, stop, weather station, flow meter)
Sizes: Up to 5 two-wire paths, each supporting 5 km of cable; additional cable drivers at 240 valves each
Best for: Two-wire means you run one cable and drop a decoder wherever a valve is needed, instead of pulling a wire back to the controller for every station. No special cable and no topology limits — branch it however the site demands. Same sensor, weather-station and ET integration as the HM-Pro

Catalog ↗

HM Battery Controller

DC Controller

Connection: Internal 1 Ah lead-acid battery with charging, 50 mA solar panel input or external 12 V; compatible with any 24 V AC solenoid valve
Sizes: 4, 8 or 16 valve outputs
Best for: For blocks with no mains power. Output voltage is boosted so cable runs can be longer than a battery controller normally allows, and it will charge from a solar panel. Multiple master valve and pump start outputs. Works with the Heron light, temperature, rain and humidity sensors

Catalog ↗

Environmental Controllers

AC Controller

Connection: All outputs 24 V AC for driving relays; sensors connect via Heron digital link; digital input for the Heron weather station
Best for: Runs the glasshouse rather than just the irrigation — vents, heating and screens. Drives a hot-water motorised valve and a local circulating pump. Every output is general purpose, protected by an electronic overload cut-out, and surge-protected beyond ANSI C62

Catalog ↗

Weather Stations

AC Controller

Sizes: Basic, Wind, Environmental and Full weather station
Best for: Feeds the controller a calculated ET value so watering tracks actual demand instead of a fixed clock. Programs can be selectively included or excluded from ET control, so a propagation bench on a fixed schedule is not overridden by the weather

Catalog ↗

Sensors

AC Controller

Connection: Heron digital link
Sizes: Light (visible spectrum), air and pipe temperature, soil moisture (cage design), wind measured in 8 sectors
Best for: The inputs the HM-Pro and HT-Pro use to water on conditions rather than a timer. Moisture sensors go out in the crop; the cage design keeps root contact consistent

Catalog ↗

Web App / Remote Monitoring

AC Controller

Best for: Operate and monitor the controller from a PC, tablet or phone — start programs, valves or pumps, adjust water budget, assign dosing recipes and flow meters. Alarms arrive by text or email to up to four numbers, and you can pull daily, weekly or monthly reports per valve and flow meter

Catalog ↗

Hunter

Senninger 20 Series

Plastic impact sprinkler

Flow: 0.84–7.13 gpm
Pressure: 25–50 psi
Connection: 1/2" NPT male (female available)
Trajectory: 9°, 14° or 23° (models 2009 / 2014 / 2023)
Best for: Senninger’s most economical impact — risers or under-tree. Colour-coded nozzles, built-in hex wrench

Catalog ↗

Senninger Compact Impact

Plastic impact sprinkler

Flow: 3.08–7.13 gpm
Pressure: 30–50 psi
Connection: 3/4" NPT male
Trajectory: 23°
Best for: Splasharm diffuser splits the stream to bring flow closer in for better close-range coverage

Catalog ↗

Senninger WedgeDrive

Plastic impact sprinkler

Flow: 0.84–3.98 gpm
Pressure: 25–50 psi
Connection: 1/2" NPT male
Trajectory: 14° or 23° (9° also available)
Best for: Low flows and low pressures; wedge drive resists grit wear

Catalog ↗

Senninger 30 Series

Plastic impact sprinkler

Flow: 1.84–6.42 gpm
Pressure: 30–50 psi
Connection: 3/4" NPT male (female available)
Trajectory: 12° (under-tree) or 23°
Best for: Mid-range solid set and under-tree irrigation

Catalog ↗

Senninger 40 Series

Plastic impact sprinkler

Flow: 3.82–12.6 gpm
Pressure: 30–60 psi
Connection: 3/4" NPT male (female available)
Best for: Higher flows over larger spacings on solid set

Catalog ↗

Senninger 50 Series

Plastic impact sprinkler

Flow: 6.5–20.1 gpm
Pressure: 30–65 psi
Connection: 3/4" NPT male
Best for: High-flow solid set where wide spacing is needed

Catalog ↗

Senninger Part-Circle

Plastic impact sprinkler

Pressure: 30–55 psi
Connection: 3/4" NPT male
Trajectory: 23°
Radius: 38–42 ft at 1.5 ft height
Best for: Field edges, headlands and boundaries where a full circle would overthrow

Catalog ↗

Senninger 70 Series

Plastic impact sprinkler

Flow: 8.66–39.1 gpm
Pressure: 40–70 psi
Connection: 1" NPT male (1" BSPT available)
Best for: Highest flows over large diameters — Senninger states it outlasts and costs less than brass

Catalog ↗

Accu-Sync

Pressure regulator

Pressure: Regulates 20–100 psi (1.4–7.0 bar)
Sizes: AS-ADJ adjustable 20–100 psi; AS-30, AS-40, AS-50, AS-70 fixed
Best for: Screws onto any Hunter control valve to hold the zone at its optimal pressure — saves water and extends the life of everything downstream. The adjustable model sets anywhere from 20 to 100 psi; the fixed models take the guesswork out. Glass-filled nylon construction. Works with both AC and DC latching solenoids

Catalog ↗

PGV Series

AC solenoid valve

Flow: 0.2–40 gpm (0.7–150 l/min) on the 1"
Pressure: Temperature rating 150°F (66°C)
Sizes: 1" (PGV-100G globe, PGV-100A angle, PGV-101), 1½" (PGV-151), 2" (PGV-201)
Best for: Heavy-duty workhorse valve with a rugged supported diaphragm that resists stress failure and a double-beaded diaphragm seal for leak-free performance. Encapsulated 24 VAC solenoid with a captive plunger. Low-flow capability means it will run micro-irrigation zones, not just sprinkler zones. Optional DC latching solenoids for battery-powered controllers. Wide range of configurations, with or without flow control

Catalog ↗

PGV Jar-Top

AC solenoid valve

Sizes: 1" (PGV-100JT)
Best for: Same valve as the PGV but with a glass-filled nylon threaded jar ring — service it without tools. The fastest option when valves get opened often for cleaning. Encapsulated 24 VAC solenoid; optional DC latching solenoid

Catalog ↗

ICV Series

AC solenoid valve

Pressure: Operates continuously to 220 psi
Sizes: 1½", 2", 3" (ICV-301G)
Best for: Hunter’s commercial-grade valve for larger mainlines and higher flows, with captive bonnet bolts for hassle-free maintenance. Encapsulated 24 VAC solenoid; optional DC latching solenoid. Pairs with Accu-Sync for pressure regulation

Catalog ↗

PGV Series (DC latching)

DC latching solenoid valve

Flow: 0.2–40 gpm (0.7–150 l/min) on the 1"
Pressure: Temperature rating 150°F (66°C)
Sizes: 1" (PGV-100G globe, PGV-100A angle, PGV-101), 1½" (PGV-151), 2" (PGV-201)
Best for: The standard PGV ordered with a DC latching solenoid instead of the 24 VAC one, so it runs from a Hunter battery-powered controller. Rugged supported diaphragm with a double-beaded seal; low-flow capability means it will drive micro-irrigation zones, not just sprinklers. Pairs with Accu-Sync for pressure regulation

Catalog ↗

ICV Series (DC latching)

DC latching solenoid valve

Pressure: Operates continuously to 220 psi
Sizes: 1½", 2", 3" (ICV-301G)
Best for: Hunter’s commercial valve ordered with a DC latching solenoid for battery-powered control on larger mainlines. Captive bonnet bolts for hassle-free maintenance

Catalog ↗

Senninger MPR (Mini Pressure Regulator)

Pressure regulator

Flow: 0.5–3.5 gpm (114–804 l/hr) by model
Pressure: Preset outlet 15, 20, 30 or 40 psi; max inlet 45–80 psi rising with the preset
Sizes: 1/2" male NPT inlet x 1/2" female NPT outlet
Best for: The smallest regulator in the line, for single heads and short runs. A greater hydraulic area than most flow-control devices lets it regulate over a wider flow range than its size suggests. Cuts wind drift and overwatering across changing elevations and long laterals, and steadies flow so every sprinkler throws its designed pattern. Models MPR152M2F through MPR402M2F. As with every Senninger regulator, inlet pressure must sit at least 5 psi above the preset outlet

Catalog ↗

Senninger PRLG (Landscape Grade)

Pressure regulator

Flow: 0.5–7 gpm (114–1590 l/hr)
Pressure: Preset outlet 10, 15, 20, 25, 30, 35 or 40 psi; max inlet 90–120 psi rising with the preset
Sizes: 3/4" female NPT inlet x 3/4" male NPT outlet (3/4" hose x hose also available)
Best for: Landscape-grade low-flow regulator, models PRLG103F3M through PRLG403F3M. Male outlet thread makes it easy to screw straight onto a valve or riser

Catalog ↗

Senninger PRL (Low Flow)

Pressure regulator

Flow: 0.5–8 gpm (114–1817 l/hr); 0.5–5 gpm on the 6 psi model
Pressure: Preset outlet 6, 10, 12, 15, 20, 25, 30, 35 or 40 psi; max inlet 80–120 psi rising with the preset
Sizes: 3/4" female NPT inlet x 3/4" female NPT outlet (3/4" hose also available)
Best for: The workhorse for solid-set, drip and other low-volume systems, and the widest preset choice at this flow — nine settings from 6 psi up. Models PRL063F3F through PRL403F3F

Catalog ↗

Senninger PSR2 (Pivot Special Regulator)

Pressure regulator

Flow: 0.5–15 gpm (114–3407 l/hr)
Pressure: Preset outlet 6, 10, 12, 15, 20, 25, 30, 35, 40 or 50 psi; max inlet 80–130 psi rising with the preset
Sizes: 3/4" female NPT inlet x 3/4" female NPT outlet
Best for: Patented design built for systems running surface water, where grit destroys ordinary regulators. Covers a much wider flow band than the PRL at the same 3/4" size. Models PSR2063F3F through PSR2503F3F

Catalog ↗

Senninger Filter Regulator

Pressure regulator

Flow: 0.5–15 gpm (114–3407 l/hr)
Pressure: Preset outlet 6–20 psi (0.41–1.38 bar)
Best for: Filtration and pressure regulation in one body, so a zone needs one fitting instead of two. Combines PSR2 performance with reduced nozzle clogging — worth it where the water carries debris and the heads are small enough to block

Catalog ↗

Senninger PMR-MF (Pressure-Master Medium Flow)

Pressure regulator

Flow: 2–20 gpm (454–4542 l/hr); 4–16 gpm on the 6 and 10 psi models
Pressure: Preset outlet 6, 10, 12, 15, 20, 25, 30, 35, 40, 50 or 60 psi; max inlet 80–140 psi rising with the preset
Sizes: 3/4" female NPT inlet x 3/4" female NPT outlet with vane
Best for: Mid-range flows for solid-set, drip and low to medium volume systems — eleven presets, the widest choice in the line, and it reaches 60 psi. Models PMR06MF3F3FV through PMR60MF3F3FV

Catalog ↗

Senninger PR-HF (High Flow)

Pressure regulator

Flow: 10–32 gpm (2271–7268 l/hr)
Pressure: Preset outlet 10, 15, 20, 25, 30, 40 or 50 psi; max inlet 90–130 psi rising with the preset
Sizes: 1 1/4" female NPT inlet x 1" female NPT outlet
Best for: Higher flows in solid-set, drip and low-volume systems. Can be installed above or below ground. Models PR10HF5F4FV through PR50HF5F4FV

Catalog ↗

Senninger PRU (Pressure Regulator Ultra)

Pressure regulator

Flow: 20–100 gpm (4542–22713 l/hr)
Pressure: Preset outlet 10, 15, 20, 25, 30, 40, 50 or 60 psi; max inlet 90–140 psi rising with the preset
Sizes: 2" female NPT inlet x 2" female NPT outlet
Best for: The largest inline regulator Senninger makes — 100 gpm through a 2" body, for a whole block or a submain rather than a single zone. Models PRU108F8F through PRU608F8F

Catalog ↗

Senninger PRLV (Pressure Regulating Limit Valve)

Pressure regulator

Flow: Up to 18 gpm (up to 4088 l/hr)
Pressure: Preset outlet 10, 15, 20, 30, 40, 50 or 60 psi; max inlet 125 psi on every model
Sizes: 3/4" female NPT inlet x 3/4" female NPT outlet with vane
Best for: Regulates and limits — it holds the preset outlet pressure and caps flow, so a burst lateral or an open end does not drain the block. Flat 125 psi max inlet across all seven presets. Models PRLV10MF3F3FV through PRLV60MF3F3FV

Catalog ↗

Senninger PRXF-LV (Extended Flow Limit Valve)

Pressure regulator

Flow: Up to 75 gpm (up to 17034 l/hr)
Pressure: Preset outlet 20, 30, 40 or 50 psi; max inlet 125 psi
Sizes: 3" female slip inlet x 3" female slip outlet
Best for: The PRLV idea at submain scale — regulation plus flow limiting up to 75 gpm through a 3" slip body that solvent-welds straight into PVC. As a limit valve it caps downstream pressure at no more than 15 psi above the regulated setting under static (no-flow) conditions, so the line does not creep up to full inlet pressure when the zone shuts. Models PRXF20LV3FS3FS through PRXF50LV3FS3FS

Catalog ↗

Senninger mini-Wobbler (Upright)

Wobbler

Flow: 0.42–2.18 gpm
Pressure: 15–25 psi
Connection: 1/2" NPT male
Trajectory: 10° multi-level throw
Throw diameter: 26.5–38.5 ft at 1.5 ft height · 31–43 ft at 3 ft height
Best for: Extremely uniform coverage over a large diameter at low pressure. Mounts on a riser adapter or 26" riser stake; colour-coded nozzles warranted to hold orifice size five years

Catalog ↗

Senninger mini-Wobbler (Inverted)

Wobbler

Flow: 0.75–2.18 gpm
Pressure: 20–25 psi
Connection: 1/2" NPT male
Trajectory: 0° multi-level throw
Throw diameter: 30–32 ft at 3 ft height · 32–36 ft at 6 ft height
Best for: Inverted mount on drop adapter assemblies — overhead irrigation in greenhouse and nursery

Catalog ↗

Senninger Xcel-Wobbler

Wobbler

Flow: 0.78–6.97 gpm
Pressure: 10–25 psi
Connection: 1/2" & 3/4" NPT male
Throw diameter: Mid angle 32–44 ft · High angle 36.5–53.5 ft (at 1.5 ft height)
Best for: Wider flow range and lower minimum pressure than the mini-Wobbler; mid and high angle versions to maintain infiltration on overhead systems

Catalog ↗

Senninger Fogger

Mister & fogger

Flow: 6.8–23.4 gph
Pressure: 30–50 psi
Best for: Propagation and low-volume misting; consistent start-up with highly uniform distribution for short-cycle work

Catalog ↗

Senninger Mister (Upright)

Mister & fogger

Flow: 7.5–23.4 gph
Pressure: 30–50 psi
Best for: Propagation benches and humidity control; colour-coded nozzles

Catalog ↗

Senninger Mister (Inverted)

Mister & fogger

Flow: 7.5–23.4 gph
Pressure: 30–50 psi
Best for: Overhead propagation and misting from drop assemblies

Catalog ↗

Senninger Micro-Sprinkler (Upright)

Micro-sprinkler

Flow: 7.2–36.6 gph (by nozzle and pressure)
Throw diameter: 18–29 ft at 1.5–3 ft height
Best for: Container and bench irrigation; 80–140 mesh filtration by nozzle size. 14" or 26" length models

Catalog ↗

Senninger Micro-Sprinkler (Inverted)

Micro-sprinkler

Best for: Overhead irrigation in greenhouse and nursery from drop assemblies

Catalog ↗

Senninger Drop Adapter Assemblies

Hanging basket assembly

Best for: Mounts the inverted mini-Wobbler, Mister or Micro-Sprinkler on an overhead drop for hanging baskets and bench work

Catalog ↗

ACC2

AC Controller

Connection: Up to 6 flow meter inputs and 6 pump / master valve outputs
Sizes: 12 to 54 stations
Best for: Hunter’s top commercial controller, for a site big enough to need real flow management — multiple flow meters and multiple pump or master valve outputs on one controller. Also available as an ACC2 Decoder for two-wire

Catalog ↗

Pro-C

AC Controller

Connection: Conventional wiring, EZ Decoder two-wire, or hybrid conventional/two-wire
Best for: The practical middle of Hunter’s range and the one they name for nurseries. Expandable, and you can wire it conventionally, run EZ Decoder two-wire, or mix both on the same controller — useful when an old block is being extended

Catalog ↗

I-Core

AC Controller

Best for: Commercial controller sitting between the Pro-C and the ACC2, with conventional or decoder operation

Catalog ↗

NODE

DC Controller

Connection: Mounts straight onto a valve solenoid — no screws, drills or extra wires
Best for: Waterproof battery controller for temporary irrigation and anywhere without power. It clips onto the valve itself, so a single remote zone can be automated without running anything back to a panel

Catalog ↗

X-Core

AC Controller

Sizes: Up to 8 stations; 3 programs with 4 start times each
Best for: Small, straightforward controller for a compact block or a single house

Catalog ↗

HY Series Filters

Filtration

Flow: Up to 20 gpm
Pressure: 20–120 psi; 150-mesh stainless steel screen (120-mesh nylon also available)
Sizes: HY-075 (¾"), HY-100 (1"), HY-151 (1½")
Best for: The filter that belongs in front of every drip and micro zone. Stainless 150-mesh screen, and the ¾" and 1" sizes cover most nursery heads

Catalog ↗

HFR Filter Regulators

Filtration

Flow: 0.5 to 15 gpm
Pressure: Regulates to 25 or 40 psi; 150-mesh stainless steel screen
Connection: Preassembled with flush cap
Sizes: HFR-075-25 and HFR-075-40 (¾"), HFR-100-075-25 and HFR-100-075-40 (1" inlet x ¾" outlet)
Best for: Filter and regulator preassembled in one unit with a flush cap — one fitting instead of three at the head of a drip zone, and nothing to mis-assemble. Choose 25 or 40 psi at order

Catalog ↗

Drip Control Zone Kits

AC solenoid valve

Connection: Valve, filter and pressure regulator preassembled
Best for: A complete drip zone in one part — control valve, 150-mesh filter and regulator already put together and tested. Cuts the head assembly from a bench job to a single connection

Catalog ↗

ICC2

AC Controller

Connection: Any combination of conventional, EZDS two-wire and Wireless Valve Link outputs on one controller; built-in flow monitoring
Best for: The most flexible wiring of any Hunter controller — conventional stations, two-wire decoders and wireless valve links all at once. That means an old block, a new extension and an unreachable corner can share one controller instead of three. Built-in flow monitoring, and online control through Centralus

Catalog ↗

HPC

AC Controller

Best for: The Pro-C cabinet with Hydrawise Wi-Fi control built in — modular and expandable, managed from the app

Catalog ↗

HCC

AC Controller

Best for: Hunter’s commercial controller running Hydrawise — Wi-Fi scheduling and monitoring at commercial station counts

Catalog ↗

Pro-HC

AC Controller

Best for: Pro-C hardware with Hydrawise Wi-Fi — one of the three replacements for the discontinued HC

Catalog ↗

X2 with WAND

AC Controller

Connection: WAND module adds Hydrawise Wi-Fi to a dial controller
Best for: You do not have to choose between Wi-Fi and a dial. The X2 runs perfectly well from the face plate, and the WAND module adds Hydrawise later if the site wants app control — useful where a grower is not ready to put irrigation on the network

Catalog ↗

NODE-BT

DC Controller

Connection: Bluetooth; mounts on the valve solenoid
Best for: The NODE with Bluetooth — programmed from a phone at the valve rather than through the face buttons. For remote zones with no power and no wiring

Catalog ↗

MCC

AC Controller

Best for: Hunter’s modular commercial controller platform

Catalog ↗

Centralus Irrigation Management

AC Controller

Connection: Adds cloud control and monitoring to ACC2, ICC2 and Pro-C
Best for: Puts existing ACC2, ICC2 and Pro-C controllers under cloud control and monitoring from a mobile-friendly platform — no controller replacement needed

Catalog ↗

EZ Decoder System (EZDS)

AC Controller

Best for: Converts a Pro-C, HPC or ICC2 to two-wire — one cable out to the field with decoders dropped where valves are needed, instead of a home run per station

Catalog ↗

Wireless Valve Link

AC Controller

Best for: Runs a valve with no wire to it at all — for a zone across a road or beyond an obstacle where trenching is not worth it. Works alongside conventional and two-wire on the ICC2

Catalog ↗

Irritrol

700 Series UltraFlow

AC solenoid valve

Flow: 0.1–180 gpm — the 3/4" and 1" will hold flow down to 0.1 gpm
Pressure: 24 V ac solenoid, 0.2 amp holding / 0.4 amp inrush
Sizes: 3/4" (700B-.75), 1" (700-1), 1½" (700-1.5), 2" (700-2), all with internal bleed and flow control
Best for: The one to reach for on a nursery: a straight-through flow path that cuts pressure loss, and a genuine 0.1 gpm minimum so it will sense and hold a mist or micro zone that a conventional valve cannot. Glass-reinforced nylon body with stainless steel and brass internals, and a self-cleaning 150-mesh stainless filter screen on the 1”, 1½” and 2”. Five-year warranty

Catalog ↗

100 Series Century PLUS

AC solenoid valve

Flow: 5–300 gpm
Pressure: 20–220 psi — the highest pressure rating in the Irritrol range
Sizes: 1" (100P1), 1½" (100P1.5), 2" (100P2), 3" (100P3N); anti-contamination versions 102P1, 102P1.5, 102P2, 102P3N
Best for: Their mainline valve, and the only Irritrol valve that goes to 3” and 300 gpm. Glass-reinforced nylon with stainless steel and brass. The 102 versions add an anti-contamination design for dirty water, which matters on pond or recycled supply. Accepts the OmniReg modular pressure regulator in either 5–100 or 5–30 psi form, so one valve can also hold zone pressure

Catalog ↗

200B Series

AC solenoid valve

Flow: 5–120 gpm
Pressure: 24 V ac solenoid, 0.2 amp holding / 0.4 amp inrush
Sizes: 1" (214B), 1½" (216B), 2" (217B), NPT threaded
Best for: Heavy-duty UV-resistant PVC body with stainless steel hardware and a double-beaded diaphragm. Both internal and external bleed, so a zone can be opened by hand at the valve or from the controller side without tools

Catalog ↗

DZVK Drip Zone Valve Kit

AC solenoid valve

Flow: Low-flow and medium-flow regulator options
Pressure: 24 V ac solenoid, 0.2 amp holding / 0.4 amp inrush
Sizes: 3/4" and 1", eleven valve configurations — 2400DK, 700DK, 2500DK and 2713APRDK, each in low-flow (LF) and medium-flow (MF), plus low-valve (DK-LV) alternatives
Best for: A complete drip zone in one assembly — control valve, 150-mesh stainless steel Y-filter, pressure regulator and the fittings to join them. Saves specifying and stocking four separate parts per zone, and means the filtration and pressure control cannot be left out at install. Choose the valve body to suit the zone: 700 UltraFlow for the lowest flows, 2400 or 2500 for standard duty

Catalog ↗

OmniReg

Pressure regulator

Flow: 1–300 gpm — needs only 1 gpm to operate, so it still regulates on a small zone
Pressure: Adjustable: 5–30 psi (OMR-30) or 5–100 psi (OMR-100)
Sizes: OMR-30 modular regulator 5–30 psi; OMR-100 modular regulator 5–100 psi; OMR-DS downstream sensing kit
Best for: Bolts onto the 100 Series Century PLUS, 700 Series UltraFlow, 200B and 311A valves and holds constant downstream pressure however much the inlet varies — which is what protects emitters and micro-sprinklers on a site with pump cycling or long mainline runs. The OMR-DS kit senses further downstream when the regulating point is not at the valve

Catalog ↗

MC-E (Blue) Series

AC Controller

Connection: 120 V ac 60 Hz input; 24 V ac 2.08 amp (50 VA) output; outdoor lockable weather-resistant cabinet
Sizes: 4 to 48 stations — MC-4E through MC-48E, ten models
Best for: Their commercial controller, and the one worth looking at for a production site: eight independent programs, flow monitoring with diagnostics and alarms, and station run times from 0–59 seconds up to 9:59 hours — the seconds range is what lets it run mist and short-cycle zones a standard station timer cannot. Global water budget 0–255%. Backward compatible with existing MC Plus-B cabinets, so an older site can be upgraded without replacing the enclosure

Catalog ↗

Total Control-R Series

AC Controller

Connection: 120 V ac 60 Hz transformer. The 9 V alkaline battery is backup only — it keeps the time and allows off-site programming; AC power is required to operate the valves
Sizes: 6, 9 and 12 stations indoor; 6, 9, 12, 15, 18, 24, 36 and 48 stations outdoor
Best for: Their largest conventional controller, to 48 stations. Four independent programs with up to 16 start times each, seven-day calendar, odd/even or one-to-30-day intervals, and water budgeting from 10 to 200% in 10% steps. Takes the Climate Logic weather sensor and SMRT Logic app control

Catalog ↗

Rain Dial-R Series

AC Controller

Connection: 120 V ac 60 Hz transformer; 24 V ac 0.5 amp per station, 1.0 amp total including the master valve / pump start circuit. 9 V alkaline battery is backup only
Sizes: 6, 9 and 12 stations — indoor, outdoor and module assembly versions
Best for: The long-running Irritrol workhorse. Three independent programs, a 365-day calendar for odd/even compliance, and a master valve or pump start circuit that can be assigned per station — useful when only some zones should trigger the pump. Test-all-stations program for commissioning. Climate Logic and SMRT Logic ready

Catalog ↗

KwikDial Series

AC Controller

Connection: 120 V ac 60 Hz transformer. Built-in memory holds time, date and programming for 24 hours without AC power
Sizes: 4, 6, 9 and 12 stations, indoor and outdoor
Best for: Dial-driven programming for sites where the person setting it is not the person who installed it. Becomes weather-based when paired with the Climate Logic sensor, which reschedules automatically rather than needing the programme rewritten

Catalog ↗

KD2 Series

AC Controller

Connection: Transformer 120 V ac 60 Hz in, 24 V ac 1.250 amps out; 24 V ac 0.4 amp maximum per station
Sizes: 4, 6 and 9 stations — KD400, KD600 and KD900, each in indoor (-INT) and outdoor (-EXT) form
Best for: Current small-station controller. Three independent programs with day-of-week, odd/even or repeating-interval scheduling, self-diagnostic function with an electronic circuit breaker that shuts down a shorted station rather than the whole controller, and non-volatile memory that keeps programmes through an outage. RainSensor ready

Catalog ↗

Maxijet

Max-14 Fill-In

Micro-sprinkler

Flow: 5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory: +15°
Throw diameter: 8.5–17 ft
Best for: Mature fruit trees and shrubs — 14 wide streams for a filled-in 360° pattern. 10-32 triple-lead threads for 2-turn installation

Catalog ↗

Max-14 Stream

Micro-sprinkler

Flow: 5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory: +18°
Throw diameter: 10.5–18 ft
Best for: 14 narrow streams for a large 360° pattern where reach matters more than fill

Catalog ↗

Max-12 Fill-In 300°

Micro-sprinkler

Flow: 5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory: +15°
Throw diameter: 9–18 ft
Best for: 300° pattern with a break that avoids spraying trunks

Catalog ↗

Max-12 HDR Down Fill-In

Micro-sprinkler

Flow: 5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory: −8°
Throw diameter: 5.5–7 ft
Best for: High-density plantings — 12 down streams for a tight filled-in 360° pattern

Catalog ↗

Max-10 Fill-In 240°

Micro-sprinkler

Flow: 5.6, 7.7, 10.5 & 13.5 gph @ 20 psi (orifice .03"–.044")
Trajectory: +15°
Radius: 4.5–6 ft
Best for: 240° filled-in 10-stream pattern for edge rows and against structures

Catalog ↗

Winged One-Piece Jet Spinners

Micro-sprinkler

Best for: Rotating spinner head for wider, softer coverage than a fixed jet

Catalog ↗

Two-Piece Jets (Deflector with Base)

Micro-sprinkler

Best for: Deflector-and-base design so the pattern can be changed without replacing the base

Catalog ↗

Dual, Barb & Spider Stake Assemblies

Multi-outlet dripper (MODS)

Sizes: Dual, barb and spider assemblies; stakes 6", 13" and tall 13"
Best for: The multi-outlet side of the Maxijet stake range — a spider assembly feeds several containers from one take-off, so a bed of pots runs off a single outlet. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything. Also listed under Micro-sprinklers, where the same assemblies appear as stake-mounted heads

Catalog ↗

Stake-Mounted Micro-Sprinkler Assemblies

Micro-sprinkler

Connection: Barbed adapter chosen to suit the water-source connection
Sizes: Stakes 6", 13" and tall 13" · black, orange, green, tan · clip or barb · .205" OD and .240 vinyl tubing
Best for: Maxijet custom-assemble these: your choice of micro-spray pattern and GPH, vinyl tubing cut length and colour, stake style, and the barbed adapter that fits your line — supplied made up rather than built on the bench. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything. Call the factory for pricing on custom assemblies

Catalog ↗

Stakes

Bench & tubing support

Connection: Takes .205" OD and .240 vinyl tubing
Sizes: 6", 13" and tall 13"; black, orange, green and tan; clip or barb style
Best for: The bare stakes, sold without the assembly. UV-stabilised resin so they survive years of weather rather than going brittle in one season. Stakes come in 6", 13" and tall 13", in black, orange, green and tan — high-visibility colours for agriculture, muted ones for landscape where you would rather not see them. Clip and barb styles: vinyl snaps into the clip, or pushes onto the barb. Both suit .205" OD and .240 vinyl tubing. The 13" stakes have a built-in side hole that holds the tubing tucked in rather than flapping loose, and some carry a second hole that grips crimped vinyl to shut off flow to that head — so one pot can be taken out of service without cutting anything.

Catalog ↗

MicroGrow

Water Plus VPD

AC Controller

Connection: Precise VPD sensor supplied with each system
Sizes: 12 independent stations
Best for: VPD watering without the Water Pro price — set the target values and it runs. For a grower who wants sensor-driven irrigation rather than a clock but does not need expandability or two-zone control

Catalog ↗

Water Pro VPD

AC Controller

Connection: Precision aspirated VPD sensor included; Growlink compatible
Sizes: 12 stations, expandable to 24; two separate zones
Best for: Waters on vapour pressure deficit rather than a timer — the sensor reads air temperature, humidity and a simulated leaf temperature, and the valves open when the plant actually needs it. Watering programs can be stepped as the crop or root system develops, and night watering can be disabled. The professional choice in propagation houses

Catalog ↗

Water Max

AC Controller

Connection: 24 VAC in and out; output switches centre-off / automatic / manual; lighted output indicators
Sizes: 12 independent stations; 24-hour on-board digital clock
Best for: Twelve stations each set individually for run time, watering days and repeats up to four times a day, and each usable for misting or irrigation. Propagation mist has its own start and stop times plus on/off cycle times, and night misting adjusts separately. Alternate-day watering — every day, every other day or every third day

Catalog ↗

Mini Mist

AC Controller

Connection: 24 VAC; output switches centre-off / automatic / manual; photocell for day/night detection; non-metallic weatherproof lockable enclosure with clear cover
Sizes: 2 independent stations; 24-hour on-board digital clock
Best for: The Water Max in a two-station box. Either station can run misting or irrigation, with the same start/stop and alternate-day programming. The right size for one propagation bench rather than a whole house

Catalog ↗

Procom II

AC Controller

Connection: 24 VAC low voltage; front-panel manual override switches; sensors sold separately
Sizes: Single zone up to complex multi-zone; NEMA 12 lockable non-metallic enclosure with clear cover
Best for: Their flagship, and the one specified on commercial and research ranges worldwide. Control algorithms work off outdoor weather as well as inside conditions, so the house reacts to what is coming rather than only what has happened. Four daily operation modes including DIF, 30-day sensor history, and irrigation or misting control on time or soil moisture. Growlink-compatible

Catalog ↗

MultiGrow (AC)

AC Controller

Connection: RS-485 daisy chain to EnviroSensors, output modules and remote sensors, 1.6 km maximum chain length (expansion available beyond); power input 12/24 V AC or DC with output voltage matching input; full hardware override on every output module
Sizes: Up to 8 growing zones per controller · up to 32 of any one module — 32 output modules give up to 320 outputs, alongside 32 nutrient probes and 32 environment sensors · output modules carry 10 relays each
Best for: Eight zones on one interface, each managed individually — the step up from a single-zone box when the site has grown into several houses. EnviroSensors read temperature, humidity, light and CO2 (PRO version); remote sensors read nutrient concentration, pH, moisture and temperature. Controls venting, wet wall, hydronic heating, light banks, CO2, dehumidification, shade and blackout curtains, HAF fans and extraction, plus batch dosing to 50 recipes and continuous dosing across 8 reservoirs with up to 10 nutrients and a pH adjuster each. Irrigation runs on accumulated solar radiation, a schedule, or rootzone moisture. Alarms go out by email and text per user, settings back up daily, and four access levels keep staff to their own area. Note: this is the Autogrow MultiGrow, supplied and supported by Micro Grow — remote access is through the Autogrow portal at my.autogrow.com — Powered from the grid — 12/24 V AC input, output voltage matching input.

Catalog ↗

MultiGrow (DC)

DC Controller

Connection: RS-485 daisy chain to EnviroSensors, output modules and remote sensors, 1.6 km maximum chain length (expansion available beyond); power input 12/24 V AC or DC with output voltage matching input; full hardware override on every output module
Sizes: Up to 8 growing zones per controller · up to 32 of any one module — 32 output modules give up to 320 outputs, alongside 32 nutrient probes and 32 environment sensors · output modules carry 10 relays each
Best for: Eight zones on one interface, each managed individually — the step up from a single-zone box when the site has grown into several houses. EnviroSensors read temperature, humidity, light and CO2 (PRO version); remote sensors read nutrient concentration, pH, moisture and temperature. Controls venting, wet wall, hydronic heating, light banks, CO2, dehumidification, shade and blackout curtains, HAF fans and extraction, plus batch dosing to 50 recipes and continuous dosing across 8 reservoirs with up to 10 nutrients and a pH adjuster each. Irrigation runs on accumulated solar radiation, a schedule, or rootzone moisture. Alarms go out by email and text per user, settings back up daily, and four access levels keep staff to their own area. Note: this is the Autogrow MultiGrow, supplied and supported by Micro Grow — remote access is through the Autogrow portal at my.autogrow.com — Powered from 12/24 V DC — the same unit run off battery or solar where there is no mains at the compartment.

Catalog ↗

Growcom (Growmaster)

AC Controller

Pressure: Temperature accuracy ±1°F · humidity ±2% RH · solar K-LUX ±20% · pyranometer and PAR ±3%
Connection: 24 VAC 50/60 Hz; weatherproof lockable enclosure with clear cover; sensors sold separately
Sizes: 8 sensor inputs · 12 × 24 VAC outputs · 4 digital inputs; enclosure 8.5" W × 10.5" H × 5.5" D
Best for: Procom control logic in a single-zone box — the sensible choice for one house rather than a range. Runs cooling, air circulation, ventilation, shading and all heating including hot-water valves and boilers, with optional fogging and dehumidification on a humidity sensor. Eight ventilation and eight shade stages, day / midday / evening / night and DIF modes, full alarms and 30-day sensor history. 16-character 2-line LCD

Catalog ↗

Growmate Plus

AC Controller

Connection: 24 VAC low voltage; front-panel manual override on every output; sensors sold separately
Sizes: 5 cooling stages · 2 heating stages · air circulation output for HAF fans
Best for: Microprocessor control at a price a smaller grower can actually justify. Day and night heating and cooling set independently plus DIF, large display giving a constant readout of every sensor, and manual override switches on the front panel. Optional humidity sensor adds true dehumidification

Catalog ↗

Growmate

AC Controller

Pressure: Digital readout selectable Fahrenheit or Centigrade
Connection: 24 VAC low voltage; front-panel manual override switches; sensors sold separately
Sizes: 3 cooling stages · 2 heating stages · air circulation output for HAF fans
Best for: The Growmate Plus feature set on a smaller frame — three cooling stages instead of five. Separate day and night temperature control, DIF standard, large digital display and program switches. For a single small house where a full computer is more than the crop needs

Catalog ↗

Ventmate Plus

AC Controller

Connection: 24 VAC low voltage; manual override switches standard
Sizes: 2 ventilation outputs · up to 8 stages of operation
Best for: One box for everything that opens — roof vents, side vents, roll-up walls or a retractable roof, on two separate outputs and up to eight stages. Day, night and DIF settings standard. Add a Weatherstat or Weathermaster for wind and rain safety override so a gust cannot wreck an open roof

Catalog ↗

Growstat

AC Controller

Connection: 24 VAC; automatic night photocell
Sizes: One stage of heating and one of cooling, or two stages of either, in a single zone
Best for: When one zone needs exact heating or cooling and nothing else, a stat costs a fraction of a computer. Day, night and DIF settings. A fogging version is available using precise humidity or temperature sensors

Catalog ↗

Lightstat

AC Controller

Connection: Solar sensor input; controls HID and LED fixtures
Sizes: Two channels — for checkerboard lighting layouts
Best for: Runs lights on measured solar intensity and time of day rather than a clock alone, so on a dull day the supplemental lighting fills in and on a bright one it stays off. Photoperiod extension built in. Two channels let you alternate fixtures in a checkerboard instead of switching the whole house at once

Catalog ↗

Ventstat

AC Controller

Pressure: Temperature accuracy ±1°F; ½" LCD, °F or °C selectable
Connection: 24 VAC low voltage; clear-cover weatherproof enclosure
Sizes: Up to 8 stages; enclosure 5.25" × 6.5" × 4.5" (133 × 165 × 114 mm)
Best for: Drives any motorised vent, roll-up or retractable roof in up to eight stages off indoor temperature, with separate day, night and DIF settings and night detection. User-selectable differential and internal timed staging so vents step rather than hunt

Catalog ↗

Shadestat

AC Controller

Pressure: Solar K-LUX level accuracy ±20%; ½" liquid crystal display
Connection: 24 VAC 50/60 Hz; control contacts rated 2 A; clear-cover weatherproof enclosure
Sizes: Up to 8 stages; enclosure 5.25" × 6.5" × 4.5" (133 × 165 × 114 mm)
Best for: Operates any motorised shade or energy curtain off outdoor solar level in up to eight stages. The energy mode closes the curtain at night with night detection, which is where a shade system pays for itself in heat retained rather than light excluded

Catalog ↗

Fogstat

AC Controller

Connection: 24 VAC; separate relay outputs; manual/off/automatic switches; lockable clear weatherproof enclosure; UL/CSA listed
Sizes: Two outputs, each configurable for a humidity or a temperature sensor
Best for: One zone of fog on temperature and humidity together, or two zones on humidity alone. Separate day and night modes with an automatic night photocell, and manual switches on the front so a zone can be run by hand without reprogramming

Catalog ↗

Weathermaster

AC Controller

Connection: 24 VAC; RS-485 data port; interfaces with Growlink
Sizes: Monitors wind speed and direction, rain, solar level and outdoor temperature
Best for: Their full weather station — the outdoor half of the control loop. Protects ventilation from wind and rain damage, and feeds outdoor conditions to the Procom or Growcom so the house anticipates weather instead of reacting to it. Works standalone with other makers vent controls too

Catalog ↗

Weatherstat

AC Controller

Connection: Sends override signals to any vent motor control; more than one control may be interconnected
Sizes: Wind speed monitor and rain sensor; records and displays high and low sensor readings
Best for: The cheap insurance on an open roof. Watches wind speed and rain and sends a safety override to every connected vent motor control, then resets automatically once the weather passes. Works with virtually any vent motor control and can be retrofitted to an existing system

Catalog ↗

VFD Modulated Fan Controls

AC Controller

Connection: NEMA 4X enclosure with ventilation fan; main and individual fan disconnects; motor protection switches
Sizes: 3 preset speeds as standard, more available; single or three phase; built to scale per project
Best for: Running exhaust fans on a variable drive instead of staging them on and off — the fan ramps to hold a static pressure, which saves real money on power and stops the temperature sawtooth that stepped fans produce. Programmable acceleration and deceleration, single or multi-up motor configurations

Catalog ↗

Motor Control Series 100 / 200 / 24 VDC

AC Controller

Connection: Non-metallic NEMA 4X enclosure; over-current protection; UL/CSA listed
Sizes: Series 100 for 120 VAC 3-wire motors · Series 200 for 220/480 VAC 5-wire motors · Series 24 VDC for low-voltage motors
Best for: The motor control between the controller and the gearbox, matched to whatever motor is already on the house — built for all the major motor and gearbox makers. NEMA 4X non-metallic so it survives a wet, fertiliser-laden greenhouse better than a painted steel box

Catalog ↗

Motor Controls Series VFD

AC Controller

Connection: UL/CSA listed; lighted status indicators for all limit switches
Sizes: Two speeds standard, additional speeds available; single or three phase
Best for: Soft-start and electrical braking on vents and shades, which stops the coasting that overshoots a limit switch and slowly wrecks the rack. Two speeds standard. Lighted limit-switch indicators make a fault obvious at the panel instead of on the roof

Catalog ↗

Growlink

AC Controller

Connection: Connects to Growmaster Procom, Growcom, Water Pro and Weathermaster systems
Sizes: Works with any version of Microsoft Windows
Best for: Point-and-click monitoring and setpoint changes from the office or off site, with colour graphs or spreadsheets of sensor readings and equipment positions, and export to Excel. Screens are built to your own layout before shipping, and you can drop in photographs of your own ranges so the interface matches the site

Catalog ↗

Custom Built Equipment Switching Cabinets

AC Controller

Connection: NEMA 4X non-metallic fully gasketed enclosure; UL and CSA listed panel; custom drawings and a sensor connection diagram included
Sizes: Built to project — includes all load contactors and relays for a complete installation
Best for: The power side of the installation. Direct-connects exhaust fans, HAF fans, pumps, heaters and vent and shade controls to any MicroGrow controller, so the low-voltage controller is not wired to line-voltage equipment on site by guesswork. Complete custom drawings supplied

Catalog ↗

Paige

18/2 Control Valve Wire — 2 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180010 · 18/2 (also written 18-2) · 2 conductors · White jacket · O.D. .195" · 21 lbs/1000 ft
Best for: The everyday run — a hot and a common in one jacket to a single valve, and the count growers reorder most. Jacket is white, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/3 Control Valve Wire — 3 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180019 · 18/3 (also written 18-3) · 3 conductors · Blue jacket · O.D. .205" · 27 lbs/1000 ft
Best for: Runs up to 2 valves off one cable on a shared common, instead of pulling 3 separate wires down the same trench. Jacket is blue, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/5 Control Valve Wire — 5 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180030 · 18/5 (also written 18-5) · 5 conductors · Brown jacket · O.D. .245" · 43 lbs/1000 ft
Best for: Runs up to 4 valves off one cable on a shared common, instead of pulling 5 separate wires down the same trench. Jacket is brown, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/6 Control Valve Wire — 6 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180040 · 18/6 (also written 18-6) · 6 conductors · Black jacket · O.D. .265" · 54 lbs/1000 ft
Best for: Runs up to 5 valves off one cable on a shared common, instead of pulling 6 separate wires down the same trench. Jacket is black, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/7 Control Valve Wire — 7 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180050 · 18/7 (also written 18-7) · 7 conductors · Yellow jacket · O.D. .280" · 58 lbs/1000 ft
Best for: Runs up to 6 valves off one cable on a shared common, instead of pulling 7 separate wires down the same trench. Jacket is yellow, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/8 Control Valve Wire — 8 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180060 · 18/8 (also written 18-8) · 8 conductors · Orange jacket · O.D. .290" · 66 lbs/1000 ft
Best for: Runs up to 7 valves off one cable on a shared common, instead of pulling 8 separate wires down the same trench. Jacket is orange, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/9 Control Valve Wire — 9 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180070 · 18/9 (also written 18-9) · 9 conductors · Purple jacket · O.D. .310" · 75 lbs/1000 ft
Best for: Runs up to 8 valves off one cable on a shared common, instead of pulling 9 separate wires down the same trench. Jacket is purple, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/10 Control Valve Wire — 10 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180080 · 18/10 (also written 18-10) · 10 conductors · Gray jacket · O.D. .325" · 84 lbs/1000 ft
Best for: Runs up to 9 valves off one cable on a shared common, instead of pulling 10 separate wires down the same trench. Jacket is gray, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/12 Control Valve Wire — 12 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180090 · 18/12 (also written 18-12) · 12 conductors · Pink jacket · O.D. .340" · 96 lbs/1000 ft
Best for: Runs up to 11 valves off one cable on a shared common, instead of pulling 12 separate wires down the same trench. Jacket is pink, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/13 Control Valve Wire — 13 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180091 · 18/13 (also written 18-13) · 13 conductors · Light Blue jacket · O.D. .355" · 104 lbs/1000 ft
Best for: Runs up to 12 valves off one cable on a shared common, instead of pulling 13 separate wires down the same trench. Jacket is light blue, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/16 Control Valve Wire — 16 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180055 · 18/16 (also written 18-16) · 16 conductors · White/Brown jacket · O.D. .383" · 128 lbs/1000 ft
Best for: Runs up to 15 valves off one cable on a shared common, instead of pulling 16 separate wires down the same trench. Jacket is white/brown, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/19 Control Valve Wire — 19 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 180058 · 18/19 (also written 18-19) · 19 conductors · Blue/White jacket · O.D. .405" · 150 lbs/1000 ft
Best for: Runs up to 18 valves off one cable on a shared common, instead of pulling 19 separate wires down the same trench. Jacket is blue/white, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18/25 Control Valve Wire — 25 conductor

Wire & cable

Connection: Direct burial, sun resistant, no conduit required; solid bare copper, PVC insulation; UL 1493 listed by UL or ETL; 30 V max, 80°C
Sizes: Item 18066 · 18/25 (also written 18-25) · 25 conductors · Purple/White jacket · O.D. .470" · 193 lbs/1000 ft
Best for: Runs up to 24 valves off one cable on a shared common, instead of pulling 25 separate wires down the same trench. Jacket is purple/white, so the conductor count is identifiable at the valve box without counting. Paige spec P7183D covers 2 to 25 conductors in 18 AWG; counts without a stock item number are available to order.

Catalog ↗

18 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7002D)
Sizes: Items 160010, 160020, 160030, 160040, 160050, 160060, 160070, 160080, 160090, 160100, 160130 · colours Red, White, Black, Orange, Blue, Yellow, Purple, Brown, Tan, Pink, Green · coils 500/2500 ft
Best for: The default for short greenhouse runs — a zone or two off a controller in the same house. The default for short greenhouse runs. Step up a gauge before the voltage drop starts dropping out solenoids at the far end. 11 colour options, so zones stay identifiable years later.

Catalog ↗

16 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7002D)
Sizes: Items 160140, 160150, 160160, 160170, 160180, 160190, 160200, 160210, 160220, 160225, 160230, 160240 · colours Red, White, Black, Orange, Blue, Yellow, Purple, Brown, Tan, Pink, Grey, Green · coils 500/2500 ft
Best for: The step up when 18 AWG is marginal: a longer run, or a solenoid with higher inrush than the wire will carry cleanly. A step up from 18 AWG where the run is longer or the solenoid inrush higher — the usual answer when 18 is marginal. 12 colour options, so zones stay identifiable years later.

Catalog ↗

14 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160250C, 160260C, 160270C, 160280C, 160290C, 160300C, 160310C, 160320C, 160330C, 160340C, 160350C, 160360C · colours Red, White, Black, Orange, Blue, Yellow, Purple, Brown, Tan, Pink, Grey, Green · coils 500/1000/2500 ft
Best for: The common size for runs leaving the headhouse — enough copper for a few hundred feet without the voltage sagging at the solenoid. For longer runs where 16 AWG would drop too much voltage, and for common wires carrying several zones back. 12 colour options, so zones stay identifiable years later.

Catalog ↗

12 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160370C, 160380C, 160390C, 160400C, 160410C, 160420C, 160425C, 160460C · colours Red, White, Black, Orange, Blue, Yellow, Purple, Green · coils 500/2500 ft
Best for: For long runs out to distant blocks, and for common conductors carrying several zones back to the controller. For longer runs where 16 AWG would drop too much voltage, and for common wires carrying several zones back. 8 colour options, so zones stay identifiable years later.

Catalog ↗

10 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160470C, 160480C, 160490C, 160510C, 160520C, 160550C · colours Red, White, Black, Blue, Yellow, Green · coils 500/2500 ft
Best for: Heavy enough for long mainline runs, and the usual choice for a common shared by a whole bank of valves. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 6 colour options, so zones stay identifiable years later.

Catalog ↗

8 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; solid bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160560C, 160570C, 160580C, 160614C · colours Red, White, Black, Green · coils 500/2500 ft
Best for: Mainline gauge — long distances, or a common carrying a large block of solenoids without dropping voltage. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 4 colour options, so zones stay identifiable years later.

Catalog ↗

6 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; stranded bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160637C, 160640C, 160650C, 160670C · colours Red, White, Black, Green · coils 500/1000 ft
Best for: Stranded from here up. For very long runs and heavy commons where smaller gauge would drop too much voltage to pull a solenoid in. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 4 colour options, so zones stay identifiable years later.

Catalog ↗

4 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; stranded bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160681C, 160680C, 160690C, 160695C · colours Red, White, Black, Green · coils 500/1000 ft
Best for: Stranded heavy gauge for the longest runs on a site, and for feeding a distant valve bank. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 4 colour options, so zones stay identifiable years later.

Catalog ↗

2 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; stranded bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items 160754R, 160754C, 160751C, 160755C · colours Red, White, Black, Green · coils 500/1000 ft
Best for: Stranded, for the longest distribution runs where voltage drop governs the whole design. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 4 colour options, so zones stay identifiable years later.

Catalog ↗

1/0 AWG Single Conductor Valve Wire — PVC, Type UF

Wire & cable

Connection: Direct burial, sun resistant, no conduit; stranded bare copper, PVC insulation; UL 1493 listed; 30 V max (Paige spec P7001D)
Sizes: Items · colours
Best for: The heaviest in the range — stranded, for main distribution across a large operation. Heavy gauge for long mainline runs and common conductors carrying a whole block of zones. Sized off the run length and total solenoid load, not off habit. 0 colour options, so zones stay identifiable years later.

Catalog ↗

Golf Course Valve Control Wire — PE, chemical resistant (P7079D)

Wire & cable

Connection: Solid copper, polyethylene insulation, direct burial
Sizes: 14, 12 and 10 AWG · 27 items including 150040C, 150050C, 150060C, 150070C, 150080C, 150090C, 150100C, 150110C · 500 ft put-ups
Best for: Paige’s golf-course wire, and the one to specify anywhere the ground gets fertiliser, herbicide, pesticide and fungicide through it season after season — polyethylene insulation resists the chemistry that degrades PVC. Thinner wall and lighter than the Type UF wire (.045" vs .060" at 14 AWG) and marked GOLF WIRE on the jacket. Different UL listing too: 1551 600 V as well as 1493 30 V. Unnecessary on clean ground, worth it on a heavily treated one.

Catalog ↗

14 AWG Armored Valve Wire

Wire & cable

Connection: Metallic armor over the insulation, direct burial
Sizes: Items 160242, 160244, 160243, 160245, 160246 · Paige specs P7167D and P7168D
Best for: The usual armored gauge for zone runs through beds where mice are a problem. On a nursery with mice in the mulch beds, armored on the main runs costs less than one dig-and-repair.

Catalog ↗

12 AWG Armored Valve Wire

Wire & cable

Connection: Metallic armor over the insulation, direct burial
Sizes: Items 160430, 160440, 160450, 160431 · Paige specs P7167D and P7168D
Best for: Armored in the heavier gauge, for longer runs that also need protecting. On a nursery with mice in the mulch beds, armored on the main runs costs less than one dig-and-repair.

Catalog ↗

10 AWG Armored Valve Wire

Wire & cable

Connection: Metallic armor over the insulation, direct burial
Sizes: Items 160557, 160558 · Paige specs P7167D
Best for: The heaviest armored option — long runs where both voltage drop and rodent damage are live risks. On a nursery with mice in the mulch beds, armored on the main runs costs less than one dig-and-repair.

Catalog ↗

16 AWG Toro Communication Cable

Wire & cable

Connection: Shielded, some builds with armor; direct burial
Sizes: 16AWG 1 Pair Shielded (item 180095TH) · 16AWG 1 Pair Shield & Armor (item 180096TH)
Best for: A single shielded pair, with an armored build available. Specify the pair count the controller needs; this is not interchangeable with valve wire.

Catalog ↗

18 AWG Toro Communication Cable

Wire & cable

Connection: Shielded, some builds with armor; direct burial
Sizes: 18AWG 2 Pair Shield & Armor (item 180007) · 18AWG 2 Pair Shielded (item 180008)
Best for: Two shielded pairs, with a drain wire, and an armored build available. Specify the pair count the controller needs; this is not interchangeable with valve wire.

Catalog ↗

19 AWG Toro Communication Cable

Wire & cable

Connection: Shielded, some builds with armor; direct burial
Sizes: 19AWG 6 Pair (item 641191)
Best for: Three or six pairs, for sites with more satellites to reach. Specify the pair count the controller needs; this is not interchangeable with valve wire.

Catalog ↗

20 AWG Toro Communication Cable

Wire & cable

Connection: Shielded, some builds with armor; direct burial
Sizes: 20AWG 3 Pair (item 180006)
Best for: Three pairs in the lightest gauge of the communication range. Specify the pair count the controller needs; this is not interchangeable with valve wire.

Catalog ↗

2-Wire Decoder Cable

Wire & cable

Connection: Twisted pair for decoder systems; connects a whole site on one path
Sizes: 14 AWG Toro 2-wire decoder twisted
Best for: The cable for a two-wire decoder controller — Toro TDC, Rain Bird LXD, Hunter EZDS and the like. One twisted path around the site instead of a home run per valve, which is what makes decoder systems worth it on a large range. Twist rate matters for noise; do not substitute ordinary wire

Catalog ↗

Splices & Waterproof Connectors

Wire & cable

Connection: Silicone-filled, gel-filled, resin or re-enterable, for direct burial and continuous submersion
Sizes: Ideal WeatherProof direct-bury and Underground continuous-submersion splices · 3M direct bury splice kit · 3M gel-filled insulation displacement connectors · re-enterable and re-usable connectors · resin and epoxy kits · soft-skirt and rigid plastic wire connectors · brass split bolts · 16–8 AWG
Best for: Where irrigation wiring actually fails. A wire nut and tape in a valve box is a callback waiting to happen — a filled splice rated for continuous submersion is not. Re-enterable connectors are worth the extra on anything you expect to troubleshoot again

Catalog ↗

Grounding & Lightning Protection

Wire & cable

Connection: For grounding two-wire paths, decoders and controller cabinets
Sizes: Bare copper solid and stranded · grounding wire · grounding rods · grounding plates · grounding clamps and splices · tools, accessories and lightning protection
Best for: A two-wire decoder path is a long conductor in open ground, which is exactly what a nearby strike finds. Grounding at the intervals the controller maker specifies is what stops one storm taking out a run of decoders — and it is the part most often skipped on install

Catalog ↗

Wire Stripping Tools & Accessories

Wire & cable

Connection: For making up and identifying irrigation wiring
Sizes: Stripping tools · tapes · marking · power cords · cable ties
Best for: The consumables side — strippers sized for irrigation gauges, tape, wire markers and ties. Marking is the one growers regret skipping: an unlabelled bundle in a valve box costs an hour every time somebody opens it

Catalog ↗

Submersible Pump Cable

Wire & cable

Connection: For submersible pump motors in wells
Sizes: SP Flat Jacketed · SP Twisted
Best for: Rated for continuous submersion down a well casing, which ordinary direct-burial wire is not. Flat jacketed sits tighter against the drop pipe in a narrow casing; twisted is easier to handle on deeper sets

Catalog ↗

Primerus

Spot-Spitter

Spray stakes & emitters

Best for: The world’s leading single-container nursery sprayer — one stake per pot, no moving parts to clog

Catalog ↗

Spot-Spitter Tall

Spray stakes & emitters

Best for: Taller stake for larger containers and deeper canopies

Catalog ↗

Spot-Spitter DownSpray

Spray stakes & emitters

Best for: Down-spray pattern that keeps water off foliage and inside the pot

Catalog ↗

QCom

GEMLink 5

AC Controller

Connection: Runs the whole QLink range over RS-485
Sizes: Windows graphical interface; site, zone, range and panel views
Best for: The head end the whole QLink range reports to. Summary screens for demand irrigation, on/off heating and cooling devices, vents and anticipatory hot water, so the status of every growing condition is on one sortable, printable list. Version 5 adds demand irrigation and fertilizer control plus user-selectable time windows for minimum pipe temperature — that last one is where the energy saving is. Archived data recalls as graphs or tables

Catalog ↗

QL-WS-4000 QLink Weather Station

AC Controller

Connection: RS-485 to GEMLink; analog channels conditioned at test for a specific probe type
Sizes: Item QL-WS-4000 · 6×6 enclosure, blank cover · 4 analog sensor inputs, 2 digital inputs
Best for: The outdoor half of a QLink system — wind, rain and light feeding the vent and shade logic so the house acts on weather rather than only on inside temperature

Catalog ↗

QL-SPC-4100 QLink Sensing Proportional Commander

AC Controller

Connection: RS-485 to GEMLink; opens and closes vents and motors
Sizes: Item QL-SPC-4100 · 6×6 enclosure with four 5-position rotary switches on the cover
Best for: Drives vent and shade motors to a position rather than simply on or off. The rotary switches on the cover let a grower override a motor at the panel without going into the software

Catalog ↗

QL-SPC-4400 QLink Sensing Proportional Analog Commander

AC Controller

Connection: 0–10 VDC or 4–20 mA outputs
Sizes: Item QL-SPC-4400 · 6×6 enclosure with four 0–100% dials on the cover
Best for: The analog version — for equipment that takes a 0–10 V or 4–20 mA signal, such as variable-speed drives, modulating valves and proportional heating, instead of open/close contacts

Catalog ↗

QL-SDC-4100 QLink Sensing Device Commander

AC Controller

Connection: RS-485 to GEMLink; switches on/off devices
Sizes: Item QL-SDC-4100 · 6×6 enclosure with 8 toggle switches on the cover
Best for: Eight on/off loads — fans, pumps, heaters, lights — each with a manual toggle on the cover so a device can be run by hand during a fault or a service visit

Catalog ↗

QL-STC-4100 QLink Sensing Timing Commander

AC Controller

Connection: RS-485 to GEMLink; switches on/off valves
Sizes: Item QL-STC-4100 · 6×6 enclosure with 8 toggle switches on the cover
Best for: Eight irrigation valves on timed control from GEMLink, with the same cover toggles for manual operation. The valve-side counterpart to the SDC

Catalog ↗

QL-BC-4100 QLink Boiler Controller

AC Controller

Connection: RS-485 to GEMLink
Sizes: Item QL-BC-4100 · 6×6 enclosure with 8 toggle switches on the cover
Best for: Boiler and hot-water control tied into the same system as the vents, which is what makes GEMLink 5’s anticipatory hot-water and minimum-pipe-temperature windows work rather than fighting each other

Catalog ↗

QL-FC-4100 QLink Fertilizer Controller

AC Controller

Connection: RS-485 to GEMLink
Sizes: Item QL-FC-4100 · 6×6 enclosure with 8 toggle switches on the cover
Best for: Puts fertigation under the same controller as irrigation, so feed follows the demand-irrigation schedule instead of being dosed on a separate timer

Catalog ↗

QL-AU-4501 QLink Alarm Unit

AC Controller

Connection: RS-485 to GEMLink
Sizes: Item QL-AU-4501
Best for: The alarm node on the network — what tells somebody a house has gone out of range before the crop finds out

Catalog ↗

QL-STC-4009 QLink MINIGator

AC Controller

Connection: Single RS-485 cable to GEMLink; each relay automatic via GEMLink or manually on
Sizes: Item QL-STC-4009 · small enclosure, clear cover · 8 valve output relays + a 9th pump-start relay
Best for: Eight irrigation valves with a ninth relay that starts the pump whenever any valve opens — so the pump interlock is built in rather than wired separately. One RS-485 cable back to the head end. Equally at home in a greenhouse or on outdoor nursery beds

Catalog ↗

QL-HSDC-4800 QLink HR8x8 Sensing Device Commander

AC Controller

Connection: Voltage or current input signals and output relay lockout pairing set by onboard DIP switches
Sizes: Item QL-HSDC-4800 · 8×6 window enclosure · 8 sensor inputs and 8 relay outputs on board
Best for: The all-in-one "8×8" board for on/off devices — eight inputs and eight relays in one unit, made to panel-mount straight inside a relay control cabinet rather than hang as a separate box. Relay lockout pairing stops opposed equipment running against itself

Catalog ↗

QL-HSTC-4800 QLink HR8x8 Sensing Timing Commander

AC Controller

Connection: Voltage or current input signals selectable by onboard DIP switches
Sizes: Item QL-HSTC-4800 · 8×6 window enclosure · 8 sensor inputs and 8 relay outputs on board
Best for: The 8×8 board configured for irrigation valves — eight timed valve outputs with the sensor inputs on the same board, panel-mounted inside the control cabinet

Catalog ↗

QL-HSPC-4800 QLink HR8x8 Sensing Proportional Commander

AC Controller

Connection: Voltage or current input signals and relay lockout pairing via onboard DIP switches
Sizes: Item QL-HSPC-4800 · 8×6 window enclosure · 8 sensor inputs and 8 relay outputs on board
Best for: The 8×8 board for vents and shade motors. Lockout pairing matters here — it is what stops an open and a close relay being energised together

Catalog ↗

QLink Sensors

AC Controller

Connection: Pairs with any QLink series unit; readings feed through to GEMLink
Sizes: SEN-50Y-HFA temperature/humidity in high-flow aspirated housing · SEN-T1A-HFA air temperature aspirated · SEN-T1S soil temperature in 1.5" stainless tube · SEN-T1W-W1/2 water temperature in ½" well · SEN-WS/WD Davis wind speed & direction · SEN-PL-A and SEN-SL-A PAR and solar light by Apogee · SEN-PL-L and SEN-SL-L PAR and solar light by LICOR · SEN-R2-ARD1 Hortimax precipitation · SEN-R3-TB Davis tipping bucket rain
Best for: Eleven sensors covering light, rain, wind and the temperatures that matter — air, water and soil. The aspirated housings on the temperature and humidity sensors are the important detail: a sensor sitting in still air reads the sensor, not the crop

Catalog ↗

Spears

True Union 2000 Ball Valves

Hose & fittings

Pressure: 235 psi at 73°F; flanged versions 150 psi
Connection: True union both ends; quarter-turn operation
Sizes: IPS ½" through 2"
Best for: True union means both ends unscrew, so the valve comes out for service without cutting the line — the difference between a ten-minute job and re-plumbing a section. Quarter-turn on/off. One-year warranty

Catalog ↗

Schedule 40 PVC Fittings & Accessories

Hose & fittings

Best for: The standard pressure fitting range — elbows, tees, couplings, reducers, adapters and unions in Schedule 40 PVC for irrigation mainlines and manifolds

Catalog ↗

Schedule 80 PVC & CPVC Fittings

Hose & fittings

Best for: Heavier wall than Schedule 40 for higher pressure and industrial duty, and CPVC where the water runs hot or the chemistry is aggressive — fertiliser injection lines especially

Catalog ↗

Check Valves

Hose & fittings

Best for: Stops backflow into the supply — required on any line carrying fertiliser or chemical. Schedule 40 and Schedule 80 bodies

Catalog ↗

Superior

SPVLF Low Flow Plastic Valve

AC solenoid valve

Flow: 0 to 200 gpm — no minimum flow requirement, reliable operation down to 0.01 gph
Pressure: 20–200 psi, to 150°F. Standard 24 V ac; 110 V ac and 220 V ac optional
Sizes: 1" (SPVLF100), 1½" (SPVLF150), 2" (SPVLF200)
Best for: The valve to reach for on mist and propagation zones. A dual-chamber design with a patented internal 3-way solenoid means it opens and closes regardless of system flow rate — there is no minimum flow to satisfy, so it will hold a zone drawing almost nothing, where a conventional diaphragm valve chatters or fails to seat. Glass-filled nylon body, EPDM diaphragm, coil rotates 360° and lifts off without disturbing the solenoid operator. Five-year warranty

Catalog ↗

SPV Plastic In-Line Valve

AC solenoid valve

Flow: 0.25–200 gpm
Pressure: 20–200 psi, to 150°F. Standard 24 V ac (0.30 A holding); low-watt, 110 V ac, 220 V ac and DC latching versions available
Sizes: 1" (SPV100), 1½" (SPV150), 2" (SPV200)
Best for: Forward-flow plastic valve with a self-cleaning scrubber rod and two-piece internal assembly protecting the diaphragm, and both internal and external bleed — internal bleed operates the valve without discharging into the valve box. 600 lb test nylon-reinforced EPDM diaphragm. Internal components interchange with the brass 950, which keeps one spares kit covering both. Takes the PRS-MOD regulating module. Five-year warranty

Catalog ↗

450 Plastic In-Line Valve

AC solenoid valve

Flow: 0.075–40 gpm
Pressure: 20–150 psi. Standard 24 V ac; low-watt, 110 V ac, 220 V ac and DC latching optional
Sizes: 3/4" (450075), 1" (450100)
Best for: Small forward-flow valve moulded from mineral-reinforced nylon with internally moulded brass screw inserts, so the threads do not strip out the way an all-plastic bonnet does. Self-cleaning scrubber rod, internal bleed lever for manual operation, 600 lb test EPDM diaphragm. Its 0.075 gpm minimum makes it usable on small micro zones. Three-year warranty

Catalog ↗

LCV Light Commercial Valve

AC solenoid valve

Flow: 0.25–40 gpm
Pressure: 15–150 psi, to 150°F. Standard 24 V ac encapsulated solenoid; DC latching optional
Sizes: 1" — LCV100F flow control NPT, LCV100FS flow control slip, LCV100S slip without flow control
Best for: Moulded reinforced UPVC body in threaded or slip, with a heavy glass-filled nylon bonnet. Two bleed options — an internal switch under the solenoid seat and an external petcock on the bonnet. Internal filter keeps debris out of the diaphragm chamber, and it is compatible with 2-wire systems, which matters when the controller is a decoder type. Five-year warranty

Catalog ↗

SPVLF / SPV (DC latching)

DC latching solenoid valve

Flow: 0.25–200 gpm
Pressure: 20–200 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: SPV 1", 1½", 2" with the optional DC latching solenoid
Best for: The plastic SPV specified with the optional latching solenoid, for battery and solar controllers where there is no mains at the valve box. Identical body, scrubber rod and EPDM diaphragm as the AC version — only the solenoid changes, so spares are shared. Note the low-flow SPVLF is AC only

Catalog ↗

450 (DC latching)

DC latching solenoid valve

Flow: 0.075–40 gpm
Pressure: 20–150 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: 3/4" (450075), 1" (450100) with the optional DC latching solenoid
Best for: The small 450 on a latching solenoid — the combination to use for a battery-run micro zone, since its 0.075 gpm minimum is low enough for drip and micro-sprinkler laterals. Mineral-reinforced nylon with moulded brass inserts

Catalog ↗

LCV (DC latching)

DC latching solenoid valve

Flow: 0.25–40 gpm
Pressure: 15–150 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: 1" — LCV100F, LCV100FS, LCV100S with the optional DC latching solenoid
Best for: UPVC light commercial valve in latching form. Already 2-wire compatible, so this is the version that pairs with a decoder system rather than a conventional multi-core run

Catalog ↗

PRS-MOD Pressure Regulating Module

Pressure regulator

Flow: Recommended by valve size: 5–20 gpm on 3/4", 5–40 on 1", 15–70 on 1¼", 20–100 on 1½", 40–200 on 2", 100–360 on 2½" and 3"
Pressure: Regulates 10–100 psi to within ±3 psi, inlet to 200 psi, to 150°F
Sizes: PRS-MOD — fits the SPV, 950 and 800 valve families
Best for: Converts an SPV or 950 into a pressure-regulating valve after the fact, which is the cheap way to fix a block that turned out to be over-pressured without replacing the valve. The adjustment dial is graduated in 5 psi steps so the setting can be read off rather than guessed, and the housing is sealed against fogging and binding. Holding downstream pressure steady also takes the water hammer out of a system with pump cycling

Catalog ↗

65P Plastic Impact Sprinkler

Plastic impact sprinkler

Flow: 3.54–5.64 gpm
Pressure: 25–60 psi
Trajectory: 25°
Throw diameter: 33–47 ft spacing
Sizes: 1/2" — 65P10, nozzle 10
Best for: Their one plastic impact, and Superior name nurseries and greenhouses among its intended uses. Heavy-duty plastic body with stainless steel springs and fulcrum pin, adjustable diffuser pin, anti-backsplash arm and a stream-straightening vane built into the bayonet nozzle. Chemical-resistant bearing seals. Rotates 20° to 340° or full circle. The budget option for temporary blocks and short-life installations where a brass head is not worth burying

Catalog ↗

Sterling Series Controller

AC Controller

Connection: Input 120 V ac 50/60 Hz; output 24 V ac 50 VA. Two 4-watt solenoids per station; up to six solenoids at once below 0.25 A each. Non-volatile memory holds programmes through any outage; a ten-year lithium battery keeps real time
Sizes: 4, 8, 12, 18, 24, 30 and 36 stations. Wall or pedestal mount — pedestal sold separately. Terminal strip option (TS) on the 18, 24, 30 and 36
Best for: The reason to specify this over a landscape timer is the time base: all six programmes can switch to seconds, giving station times from 1 second to 24 minutes in 1-second steps, with misting cycles that repeat immediately or after a delay of 1 minute to 4 hours 15 minutes. A programmable 1–59 second pause between stations lets a valve close fully before the next opens. Six independent programmes run concurrently, any station can sit in all six, and programme 6 can be triggered by a thermostat or sensor switch for frost protection or cooling. Water budgeting 1–255%, rain-off to 14 days, weather-proof locking steel cabinet

Catalog ↗

950 Brass In-Line Valve

AC solenoid valve

Flow: 5–320 gpm
Pressure: 20–200 psi, to 180°F. Standard 24 V ac; low-watt, 110 V ac, 220 V ac and DC latching optional
Sizes: 3/4" to 3" — 950075, 950100, 950125, 950150, 950200, 950250, 950300. BSPT on request
Best for: The brass workhorse of the range and the highest temperature rating of any Superior valve at 180°F. High-quality red brass with a forward-flow design, self-cleaning scrubber rod and two-piece internal assembly. External bleed for manual operation, coil rotates 360° and removes without disturbing the solenoid operator. Backward compatible with earlier Superior brass valves, so it drops into an existing installation. Takes the PRS-MOD regulating module

Catalog ↗

950DW Brass Dirty Water Valve

AC solenoid valve

Flow: 5–320 gpm
Pressure: 20–200 psi, to 180°F. Standard 24 V ac; low-watt, 110 V ac and 220 V ac optional
Sizes: 3/4" to 3" — 950DW075 through 950DW300. BSPT on request
Best for: The 950 reworked for dirty and recycled water, where suspended solids would otherwise pack the diaphragm chamber and leave a valve weeping or stuck open. Same red brass body, 600 lb test EPDM diaphragm and external bleed. Choose this over the standard 950 on pond, canal or reclaimed supply rather than relying on filtration alone

Catalog ↗

950A Brass Angle Valve

AC solenoid valve

Flow: 5–200 gpm
Pressure: 20–200 psi, to 180°F. Standard 24 V ac; low-watt, 110 V ac, 220 V ac and DC latching optional
Sizes: 1" (950A100), 1½" (950A150), 2" (950A200). BSPT on request
Best for: Angle-pattern version of the 950 for a riser coming vertically out of the ground, which removes an elbow and the pressure loss with it. Red brass, forward flow, self-cleaning scrubber rod, external bleed, 360° rotating coil

Catalog ↗

VB Reverse Flow Brass Valve

AC solenoid valve

Flow: 5–140 gpm
Pressure: 20–200 psi. Closing speed 0.9–2.0 sec at 50–100 psi. 24 V ac, 5.8 VA holding; HD coil option 7.5 VA
Sizes: 3/4" (VB07), 1" (VB10), 1¼" (VB12), 1½" (VB15), 2" (VB20)
Best for: From the Buckner collection, and the one to specify where a stuck-open valve would do real damage: the reverse-flow design fails CLOSED if the diaphragm tears or is punctured, instead of dumping the zone until someone notices. Consistent slow, smooth closing reduces water hammer and prolongs valve life. Red brass with a 600 lb test EPDM diaphragm and external bleed

Catalog ↗

VBDW Reverse Flow Dirty Water Valve

AC solenoid valve

Flow: 5–190 gpm
Pressure: 10–200 psi. Closing speed 0.9–2.0 sec at 50–100 psi. 24 V ac, 8.5 VA holding
Sizes: 3/4" (VBDW07), 1" (VBDW10), 1¼" (VBDW12), 1½" (VBDW15), 2" (VBDW20)
Best for: The VB built for dirty and recycled water, and it starts working from 10 psi rather than 20. Same fail-closed reverse-flow protection against a torn diaphragm, same slow smooth close, with anti-clogging internals. Red brass, external bleed

Catalog ↗

3200 Normally Closed Master Valve

AC solenoid valve

Flow: 0–320 gpm — no minimum flow requirement
Pressure: 20–200 psi. Standard 24 V ac; 110 V ac and DC latching optional
Sizes: 3/4" to 3" — 3200075, 3200100, 3200150, 3200200, 3200250, 3200300. 3200NXT variant also available
Best for: Master valve that shuts the mainline down between cycles, so a failed zone valve or a split line cannot empty the supply overnight. The dual-chamber design means no minimum flow, so it still seats properly on a system running a single small zone. Non-continuous flow through the solenoid extends the life of the filter assembly, and external plumbing lets that filter be serviced without pulling the valve. Supersedes the 3000

Catalog ↗

3300 Normally Open Master Valve

AC solenoid valve

Flow: 0–320 gpm — no minimum flow requirement
Pressure: 20–200 psi. Standard 24 V ac; 110 V ac optional
Sizes: 1" to 3" — 3300100, 3300150, 3300200, 3300250, 3300300
Best for: Normally open, so the mainline stays pressurised and quick couplers and manual watering work without energising anything — the right choice where staff need water on demand between programmed cycles. Dual chamber for no minimum flow, non-continuous solenoid flow to protect the filter, and external plumbing for servicing it. Supersedes the 3100

Catalog ↗

950 (DC latching)

DC latching solenoid valve

Flow: 5–320 gpm
Pressure: 20–200 psi, to 180°F. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: 3/4" to 3" — 950075 through 950300 with the optional DC latching solenoid
Best for: The red brass 950 on a latching solenoid, for a remote mainline valve with no power to it. Same 180°F rating and 320 gpm capacity as the AC build

Catalog ↗

950A (DC latching)

DC latching solenoid valve

Flow: 5–200 gpm
Pressure: 20–200 psi, to 180°F. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: 1", 1½", 2" — 950A100, 950A150, 950A200 with the optional DC latching solenoid
Best for: Angle-pattern brass valve in latching form, for a vertical riser on a battery-controlled block

Catalog ↗

3200 Master Valve (DC latching)

DC latching solenoid valve

Flow: 0–320 gpm — no minimum flow requirement
Pressure: 20–200 psi. DC latching pulse 9–24 V DC, pulse width 30–50 mS
Sizes: 3/4" to 3" — 3200075 through 3200300 with the optional DC latching solenoid
Best for: Mainline shutoff on a battery or solar controller. The dual-chamber no-minimum-flow design matters more here than on a zone valve, because a master valve has to seat reliably whatever the system happens to be drawing. The normally open 3300 has no latching option

Catalog ↗

950PRS Brass Valve with Pressure Regulation

Pressure reducing

Flow: 5–320 gpm
Pressure: Inlet 20–200 psi; integrated module holds outlet constant between 10 and 125 psi. To 180°F
Sizes: 3/4" to 3" — 950PRS075, 950PRS100, 950PRS125, 950PRS150, 950PRS200, 950PRS250, 950PRS300
Best for: The 950 with pressure regulation built into the valve rather than bolted on, so zone pressure is held whatever the mainline does. Regulation is maintained during manual operation, which a separate downstream regulator cannot promise, and it is fitted with a Schrader valve so the setting can be read with a normal pressure gauge. Red brass, internal bleed

Catalog ↗

90SD Brass Impact Sprinkler

Metal impact sprinkler

Flow: 3.54–5.44 gpm
Pressure: 25–55 psi
Trajectory: 25°
Throw diameter: 35–48 ft spacing
Sizes: 1/2" male NPT inlet — 90SD10, drive nozzle 5/32
Best for: Superior list nurseries and greenhouses first for this one. Solid brass with a manganese bronze die-cast arm, patented spray distribution grooves and a stream-straightening vane as standard, so the pattern holds its shape rather than breaking up close to the head. Stainless springs, trip assembly and fulcrum pin, anti-backsplash arm, chemical-resistant bearing seals. Rotates 20° to 340° or full circle

Catalog ↗

90DZ Zinc Impact Sprinkler

Metal impact sprinkler

Flow: 2.11–5.64 gpm
Pressure: 25–55 psi
Trajectory: 25°
Throw diameter: 34–47 ft spacing
Sizes: 1/2" — 90DZ10
Best for: Powder-coated zinc die-cast body — the middle option between the plastic 65P and a solid brass head, and also named for nurseries and greenhouses. Stainless springs and fulcrum pin, adjustable diffuser pin, anti-backsplash arm, stream-straightening vane included. Rotates 20° to 340° or full circle

Catalog ↗

17023R Brass Impact Sprinkler

Metal impact sprinkler

Flow: 1.28–5.48 gpm
Pressure: 25–60 psi
Trajectory: 23°
Throw diameter: 33–44 ft spacing
Sizes: 1/2" male NPT inlet, nozzle 3/8-24 UNF — nozzle codes 06 to 10
Best for: Agricultural head for centre pivots, solid sets, hand lines, crop cooling and frost control. Solid brass with stainless steel springs, spindle and fulcrum pin, and chemical-resistant bearing seals. Parts interchange with the Rain Bird 20JH, which matters if a block is already running that head and only some need replacing

Catalog ↗

17023W Brass Impact Sprinkler

Metal impact sprinkler

Flow: Nozzle dependent across 25–60 psi
Pressure: 25–60 psi
Trajectory: 23°
Throw diameter: Diameters to 83 ft by nozzle and pressure
Sizes: 1/2" male NPT inlet, nozzle thread 1/8-27 NPT — nozzle codes 06 to 10
Best for: The 17023 with an NPT nozzle thread rather than UNF, for solid sets, hand lines and frost control where the nozzle stock on hand is pipe-thread. Solid brass, stainless springs, spindle and fulcrum pin

Catalog ↗

170W23R Wedge Brass Impact Sprinkler

Metal impact sprinkler

Flow: Nozzle dependent across 25–60 psi
Pressure: 25–60 psi
Trajectory: 23°
Throw diameter: Diameters from 58 ft by nozzle and pressure
Sizes: 1/2" male NPT inlet, nozzle 3/8-24 UNF — nozzle codes 04 to 07
Best for: Wedge-drive version for solid sets, hand lines, centre pivot, crop cooling and frost control where smaller nozzles are wanted. The plastic self-cleaning wedge drive keeps the arm swinging consistently on gritty water

Catalog ↗

170W23W Wedge Brass Impact Sprinkler

Metal impact sprinkler

Flow: 0.33–3.51 gpm
Pressure: 25–60 psi
Trajectory: 23°
Throw diameter: 31–41 ft spacing
Sizes: 1/2" male NPT inlet, nozzle thread 1/8-27 NPT — nozzle codes 04 to 07
Best for: The lowest-flow head in the Superior impact range, starting at 0.33 gpm — useful where a block needs many small heads rather than a few large ones. Plastic self-cleaning wedge drive assembly, bearing assembly hood for longevity, chemical-resistant seals

Catalog ↗

170W15RP Wedge Brass Impact Sprinkler

Metal impact sprinkler

Flow: 0.65–0.92 gpm on the listed nozzles
Pressure: 25–50 psi
Trajectory: 15° low angle
Throw diameter: 51–70 ft diameters by nozzle
Sizes: 1/2" NPT inlet with plastic bearing, nozzle 3/8-24 UNF — nozzle codes 04 to 07, #51, #50, #44
Best for: Low 15° trajectory for under-tree solid sets, where a standard 23–25° head throws into the canopy instead of the ground. Plastic bearing on a brass body

Catalog ↗

2000S Brass Impact Sprinkler

Metal impact sprinkler

Flow: Single or dual nozzle, to roughly 20 gpm by nozzle pairing
Pressure: 35–80 psi
Trajectory: 25°
Throw diameter: 40–60 ft spacing
Sizes: 3/4" male NPT inlet — drive nozzle 1/4-18 NPT, range nozzle 3/8-24 UNF, nozzle codes 06 to 14 plus plug
Best for: Step up from the 1/2” heads for solid sets needing wider spacing. Dual-nozzle design — a drive nozzle and a range nozzle — so throw and application rate can be tuned independently rather than trading one for the other

Catalog ↗

300SAX Brass Impact Sprinkler

Metal impact sprinkler

Flow: 14.61–46.59 gpm
Pressure: 40–80 psi
Trajectory: 23°
Throw diameter: 47–80 ft radius
Sizes: 1" male NPT inlet — drive nozzle 1/4-18 NPT, range nozzle 5/8-18 UNF, nozzle codes 08 to 24
Best for: One-inch dual-nozzle head for large solid sets and field blocks. At up to 46.6 gpm and 80 ft radius this is field-scale equipment rather than a bench or container head

Catalog ↗

350SAX Brass Impact Sprinkler

Metal impact sprinkler

Flow: 14.6–46.6 gpm
Pressure: 40–80 psi
Trajectory: 23°
Throw diameter: 47–80 ft radius
Sizes: 1" male NPT inlet — drive nozzle 5/8-18 UNF, filler nozzle 3/8-24 UNF, nozzle codes 08 to 24 plus plug
Best for: The 300SAX pattern with a filler-nozzle arrangement instead of a range nozzle, which fills in the close-in area a large single nozzle leaves dry. Same 1” inlet and flow envelope

Catalog ↗

400S Brass Impact Sprinkler

Metal impact sprinkler

Flow: 34.62–132.18 gpm
Pressure: 65–100 psi
Trajectory: 23°
Throw diameter: 85–117 ft radius
Sizes: 1¼" male NPT inlet — drive and range nozzles 3/4-16 UNF, nozzle codes 14 to 40
Best for: The largest head Superior make — up to 132 gpm and 117 ft radius. Built for large-volume coverage: pasture, fertiliser dispersal, waste water treatment, reclamation, mining and dust control. Opposing nozzles and a range tube to extend radius, with an adjustable diffuser pin

Catalog ↗

AI120 Brass Impact Sprinkler

Metal impact sprinkler

Flow: 24.9–121 gpm
Pressure: 55–95 psi
Trajectory: 23°
Throw diameter: 75–113 ft radius
Sizes: 1¼" male NPT inlet — filler nozzle 1/8-27 NPT, nozzle codes 14 to 40 plus plug
Best for: Large-area head for commercial, agricultural, municipal and pasture work, and for dust control. Over-under nozzle arrangement, single or dual, with a stream-straightening vane as standard to hold the jet together at long throw

Catalog ↗

261SDX Brass Impact Sprinkler

Metal impact sprinkler

Flow: 3.94–13.73 gpm
Pressure: 30–60 psi
Trajectory: 23°
Throw diameter: 41–50 ft spacing
Sizes: 3/4" male NPT inlet — drive nozzle 1/4-18 NPT, filler nozzle 3/8-24 UNF, nozzle codes 06 to 14 plus plug
Best for: Superior name nurseries directly for this one. Part-circle capable, rotating 20° to 340° or full circle, so it can be set to keep water off a road or building line. Solid brass with stainless springs, trip assembly, collars and fulcrum pin, anti-backsplash arm, adjustable diffuser pin and single or dual nozzle

Catalog ↗

360SAX Brass Impact Sprinkler

Metal impact sprinkler

Flow: 7.75–44.01 gpm
Pressure: 35–100 psi
Trajectory: 23°
Throw diameter: 49–77 ft radius
Sizes: 1" inlet — drive nozzle 5/8-18 UNF, filler nozzle 3/8-24 UNF, nozzle codes 08 to 24 plus plug
Best for: Part-circle one-inch head with a cast brass trip assembly, over-under nozzles and an adjustable diffuser pin. Rotates 20° to 340° or full circle. The widest pressure range of the large heads at 35–100 psi, so it suits a system whose pressure is not tightly controlled

Catalog ↗

AI123 Brass Impact Sprinkler

Metal impact sprinkler

Flow: 24.9–121 gpm
Pressure: 55–95 psi
Trajectory: 23°
Throw diameter: 75–113 ft radius
Sizes: 1¼" male NPT inlet — filler nozzle 1/8-27 NPT, nozzle codes 14 to 40 plus plug
Best for: The part-circle version of the AI120, rotating 20° to 340° or full circle — the one to use on a boundary where a full-circle head of this size would throw off site. Cast brass trip assembly and a bearing assembly hood for longevity

Catalog ↗

Tavlit

Ball Valves

Hose & fittings

Connection: Female x female or male x female; lever or T-handle; swivel versions available
Sizes: ½", ¾" and 1" — catalogue numbers BV12F / BV34F / BV1F (female x female), BV12FM / BV34FM / BV1FM (male x female), and BV12FT / BV34FT / BV1FT and BV12FMT / BV34FMT / BV1FMT for the T-handle versions
Best for: Twelve catalogue numbers across three sizes and four handle/thread combinations, so the valve matches the run rather than needing an adaptor either side. The T-handle gives more leverage on a valve that gets opened and shut daily; the swivel versions let you line up the body without twisting the pipe

Catalog ↗

861 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Large wetting diameter, and can be run inverted. Anti-insect swivel seals the nozzle when water shuts off; integral nozzle filter. Filtration 100 mesh to 40 lph, 80 mesh to 90 lph, 60 mesh to 160 lph

Catalog ↗

862 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 12.5–23.6 ft (3.8–7.2 m)
Best for: Medium wetting diameter; optional RJC removable jet converter cuts the diameter for young plants and trees

Catalog ↗

863 Mini Compact

Micro-sprinkler

Flow: from 0.09 gpm (20 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Small wetting diameter, low flow and large droplets for wind resistance. Optional RJC converter for young stock

Catalog ↗

866 Mini Compact

Micro-sprinkler

Flow: 0.09–0.70 gpm (20–160 l/h) at 29 psi
Pressure: Optimal 14.5–32 psi (1.0–2.2 bar); max range 14.5–43.5 psi
Pressure comp.: PC version available
Throw diameter: 18–30 ft (5.5–9.0 m)
Best for: Flat angle with large wetting diameter, designed for inverted mounting

Catalog ↗

80X Series Bridge Design

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Robust bridge design for harsh conditions. Series 800 large wetting diameter, 801 low pressure with large diameter, 803 inverted for greenhouses

Catalog ↗

803 Upside Down

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Installed inverted for greenhouse irrigation

Catalog ↗

806 Static Sprayer

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Static sprayer (806 / 806S) for medium to small wetting diameter

Catalog ↗

807 Bubbler

Micro-sprinkler

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Bubbler head for basin and container irrigation

Catalog ↗

809 Mister

Mister & fogger

Flow: 0.09–1.06 gpm (20–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Throw diameter: 1–33 ft (0.2–10.5 m)
Best for: Misting head within the 80X bridge-design range

Catalog ↗

TriJet Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Three-jet static sprayer within the 4XXX range

Catalog ↗

Peleg Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Static sprayer head within the 4XXX range

Catalog ↗

961 Single Jet

Micro-sprinkler

Flow: 0.53 & 0.70 gpm (120 & 160 l/h)
Pressure: 22–52 psi (1.5–3.5 bar)
Best for: Single jet, low flow to cut precipitation rate while holding uniformity

Catalog ↗

4XXX Series

Micro-sprinkler

Flow: 0.05–0.79 gpm (12–180 l/h) at 29 psi
Pressure: 22–52 psi (1.5–3.5 bar)
Pressure comp.: PC version available
Best for: Static emitters — no moving parts. NFR nozzle flow reducer gives low flow through a relatively large nozzle to prevent clogging. Irrigates with fine drops and no mist. Colour-coded sprayer heads

Catalog ↗

831 Insect Protected

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Large wetting diameter. Nozzle-protection swivel shuts off after operation so insects and dirt cannot enter the water passages. Runs as low as 1 bar and 14 lph

Catalog ↗

841 Insect Protected

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Large/medium wetting diameter with the same anti-insect swivel; special bridge design prevents dripping

Catalog ↗

850 / 850D Part Circle

Micro-sprinkler

Flow: 0.06–1.06 gpm (14–240 l/h) at 29 psi
Pressure: 14.5–36 psi (1.0–2.5 bar)
Pressure comp.: PC version available
Throw diameter: 18–33 ft (5.5–10.4 m)
Best for: Part circle covering a 200° sector; adding the 850D deflector reduces it to 180°. Ideal for strip irrigation with heads overlapping from both sides

Catalog ↗

Series 700 Dynamic Sprayer

Micro-sprinkler

Flow: 0.18–0.70 gpm (40–160 l/h) at 29 psi
Pressure: 21–32 psi (1.5–2.2 bar)
Throw diameter: 10–18 ft (3.0–5.4 m)
Sizes: 7 nozzles, 0.9–1.8 mm (.039"–.071")
Best for: A thin needle inside the orifice vibrates in operation, constantly clearing the nozzle and stopping debris building up; it also shuts the nozzle at the end of irrigation. Can be inverted to shrink the wetted diameter for young plantations, then set upright as the tree grows

Catalog ↗

Butterfly Valves

Hose & fittings

Connection: Brass and polypropylene bodies; valve-box mounting available
Sizes: 2" and 4"; catalogue numbers BFV12Q and BFVP
Best for: Butterfly pattern for larger-diameter isolation where a ball valve becomes hard to turn. Brass or polypropylene body depending on water chemistry

Catalog ↗

Compression Fittings & Connectors

Hose & fittings

Connection: Compression on PE pipe; male and female threaded adaptors, tees, elbows, crosses, end plugs, starters and nut locks
Sizes: FC series couplings from ½" to 2" including reducing sizes (FC12, FC34, FC1, FC114, FC112, FC2, FC1234, FC134, FC112114) and FA series adaptors (FA1234, FA1634, FA1734B, FA2034)
Best for: A full compression range with the reducing couplings that matter in practice — FC1234 joins ½" to ¾", FC134 joins ¾" to 1", FC112114 steps 1¼" to 1½". Nut-lock design so the joint holds without a clamp

Catalog ↗

Agri Stands & Adjustable Risers

Bench & tubing support

Best for: Stands and adjustable risers to carry a sprinkler at the right height above the crop as it grows

Catalog ↗

PC Dripper Assemblies & Drip Kits

Spray stakes & emitters

Pressure comp.: Yes
Best for: Ready-made PC dripper assemblies and drip kits — dripper, tube and spike supplied together rather than assembled on the bench

Catalog ↗

Drip Spike

Spray stakes & emitters

Best for: Spike that anchors the dripper tube in the pot so it stays where it was set

Catalog ↗

Most of these come in more than one configuration. Where a spec shows a range — 4"–24" spacing, 5–15 mil — those are the catalogued options, so tell us which you need. Where it shows a single value, that's the only one the manufacturer lists. Sizes, spacings, wall thicknesses and flow rates not shown here can often still be sourced on special order — contact us to confirm current details, availability and wholesale pricing.

Manufacturer Catalogs

Go straight to the nursery catalog.

Every line below links to the manufacturer's nursery / commercial-grower resources. Browse specs, part numbers, and product data, then contact us for wholesale pricing and availability.

Drip / Micro

Thinwall & heavywall dripline, micro-sprinklers, filters & valves for orchards, protected & field crops

Website ↗Driplines ⤓Sprinklers ⤓Greenhouse & Nursery ⤓Filters ↗Valves ↗Pipe & tubing ↗On-line drippers ↗Sprinklers design guide ⤓All resources ↗

Drip / Micro

Drip tape, emitters & micro-irrigation — Toro Ag “Grower Connection” catalog, price list & design tools

Website ↗Catalog & price list ↗Greenhouse systems ↗Filtration ↗Valves ↗Fittings ↗Manuals & guides ↗

Drip / Fittings

Dripline, drippers, tubing, filtration, fittings & valves for greenhouse & nursery

Website ↗Drip irrigation ↗Sprinkler irrigation ↗Tubing ↗Filtration ↗Fittings & valves ↗Price list & brochures ↗

Valves / Control

Hydraulic & air control valves for drip, sprinkler, microjet & pivot irrigation

Website ↗Irrigation guide ⤓Irrigation products ↗

Drip / Micro

Drip tape & lines, online drippers, sprinklers, layflat, filters & fertigation (incl. T-Tape, Eurodrip)

Website ↗Drip tape & dripline ↗Online drippers ↗Sprinklers & jets ↗Layflat & pipe ↗Filters ↗Valves ↗Fertigation ↗Connectors ↗Eurodrip ↗

Drip / Sprinkler

PC dripline, GritX emitters, LF/LFX sprinklers & micro-sprays from the Rain Bird Ag division

Website ↗Ag catalog 2026 ⤓Rain Bird Ag ↗

Micro / Fittings

Low-volume micro-irrigation — drippers, sprays, foggers, misters, valves & fittings

Website ↗USA catalog ⤓Catálogo español ⤓All catalogs ↗

Micro / Spray

Micro-sprays, foggers, spray stakes & nursery stake assemblies for low-volume container irrigation

Website ↗2026 full catalog ⤓Products ↗

Filtration

Automatic screen, disc & media water filtration for drip, micro, sprinkler & pivot

Website ↗USA irrigation catalog ⤓Agricultural irrigation ↗Fertigation pumps ↗

Injection

Water-powered proportional dosing injectors — the MixRite TF series for non-electric fertigation

Website ↗MixRite TF series ⤓Ag products ↗

Watering / Equipment

Water breakers, watering wands & hose, JetRain and JetFog nozzles, PCAS drip, chemical application foggers & sprayers, controllers

Website ↗Watering Tools ↗Nozzles & Components ↗Chemical Application ↗Irrigation Systems ↗PCAS Drip ↗JetRain ↗JetFog ↗Controllers ↗Environmental Controls ↗Specialized Tools ↗

Pump Control

Constant-pressure pump control valves (CSV) — steady irrigation pressure without a VFD or large tank

Website ↗Products ↗

Valves / Fittings

Emitters, connectors, valves & filters for irrigation systems

Website ↗Water catalog ⤓All catalogs ↗Downloads ↗

Controllers

Professional irrigation & dosing controllers for greenhouse & nursery growers

Website ↗Irrigation controllers ↗Fertiliser & acid dosing ↗pH dosing ↗Environmental & sensors ↗

Horticulture

Greenhouse, nursery & open-field irrigation — foggers, misters, micro-sprinklers, Wobblers & pressure regulators (incl. Senninger)

Website ↗Foggers & misters (Senninger) ⤓Greenhouse & nursery (Hunter) ⤓All literature ↗

Valves / Sprinklers

Brass & plastic control valves, master valves and Buckner brass impact sprinklers, plus the Sterling misting controller

Website ↗Product catalog ⤓950 Series booklet ⤓Valves ↗Impact sprinklers ↗Controllers ↗

Controllers / Valves

Commercial irrigation controllers and solenoid valves — Century PLUS & UltraFlow valve lines, drip zone kits and modular pressure regulation

Website ↗Catalog ⤓Price list ⤓Parts breakout ⤓Planning & install guide ⤓Controllers ↗Valves ↗All literature ↗

Micro / Spray

Precision container micro-irrigation — Spot-Spitter spray stakes, Pot-Dripper drip rings & PC assemblies

Website ↗Spot-Spitter brochure ⤓Pot-Dripper ↗PC assemblies ↗All literature ↗

PVC / Fittings

Schedule 40/80 PVC & CPVC fittings, thermoplastic valves & solvent-weld components

Website ↗Sourcebook ↗Parts & dimensions ↗

Drip / Micro

Row-crop & sub-surface drip, micro-sprinklers & field-grade filtration for production nurseries

Website ↗Agriculture ↗Online store ↗

Tools / Fittings

Professional installation tooling — hole punches & insertion tools for setting drippers, connectors & fittings into PE tubing

Website ↗Catalog (PDF) ⤓Products ↗

Pumps

Centrifugal, self-priming & turbine irrigation pumps for growing operations

Website ↗All Berkeley products ↗

Controllers

Greenhouse environmental, irrigation and motor controls — computers, single-function stats, VPD watering and weather stations

Website ↗MultiGrow ↗Environmental controls ↗Stat series ↗Irrigation & misting ↗Weather monitoring ↗Motor controls ↗Procom II datasheet ⤓Growcom datasheet ⤓

Controllers

QLink greenhouse control range and GEMLink software — commanders, boiler and fertilizer control, irrigation and sensors

Website ↗GEMLink software ↗QLink 152 series ↗QLink 153 / MINIGator ↗QLink 154 series ↗Sensors ↗

Controllers

Irrigation, fertigation and climate controllers — cloud and cellular platforms, mains and battery multi-valve controllers, greenhouse misting control

Website ↗Irrigation & fertigation controllers ↗Fertigation machines ↗Sensors & meters ↗Valves ↗Remote terminal units ↗Downloads ↗

Chlorination

Calcium hypochlorite tablet chlorination for irrigation source water — chlorinators from 12 lb to 1,200 lb tablet capacity, plus Accu-Tab SI tablets

Website ↗Irrigation applications ↗How it works ↗Chlorination systems ↗Series 3000 (30600) sell sheet ⤓Series 2000 P sell sheet ⤓Gravity unit 3150 sell sheet ⤓

Wire & cable

Direct-burial irrigation valve wire, 2-wire decoder cable, waterproof splices, grounding and submersible pump cable

Website ↗Valve control wire ↗Splicing & connecting ↗Grounding & lightning protection ↗Submersible pump cable ↗Ampacity chart ↗Wire sizing calculators ↗

Resources

Spec it right the first time.

Sizing help, manufacturer technical references, and the details that let us come back with a material list instead of more questions.

Library

Training, tools & technical guides

34 free resources from 21 of our manufacturers — training courses, filter and wire sizing calculators, installation guides and full document libraries.

Open the library →

Getting a quote

What to send us

Your crop and growing structure, your water source, and acreage or bench count. With those three we can usually price a full material list first time round.

Send your project →

Product data

Manufacturer catalogs

Spec sheets, price lists and design tools for all 25 lines we carry — Netafim, Toro, Rain Bird, Hunter, Bermad, Rivulis, Dramm and the rest.

Browse catalogs →

Talk to us

System design

Beyond supply we size filtration, pressure regulation, chlorination, fertigation and distribution for the operation you actually run. Fifty years of it.

Ask a question →

About ML Irrigation

A wholesaler that speaks grower.

For more than 50 years, ML Irrigation has supplied irrigation equipment wholesale to production nurseries and greenhouse operations across the United States. We're not a landscape counter — our business is the equipment that keeps commercial crops watered, day in and day out.

We stock over 9,000 SKUs from more than twenty manufacturers, and we're known for the hard-to-find parts other suppliers gave up on. Beyond supply, we offer site planning and system design — sizing filtration, pressure regulation, chlorination, fertigation and distribution for the operation you actually run.

Because we buy on the nursery side of every manufacturer we carry, you get the right product for production growing: the pressure ratings, the flow rates, the filtration, and the durability a working operation needs — at wholesale.

Tell us your water source, your crop, and your layout, and we'll help you spec it from the pump to the plant.

Since 50+ years in businessFountain Inn, South Carolina

Role Wholesale distributorVolume supply to growing operations

Channel Authorized nursery dealerNursery product lines only

Serving Greenhouse, nursery & educationProduction growers, teaching & research programs

Region United StatesDomestic sourcing & supply

Get in Touch

Let's spec your next system.

Send us your project — crop, water source, and acreage or bench count — and we'll put together the material list and wholesale pricing. We ship nationwide, so wherever you're growing, we'll get you the right catalog and the right parts.

Send us your project

Email sales@mlirrigation.com

Phone (864) 862-5000

Shipping Nationwide — we ship to growers in all 50 states

Location M L Irrigation Systems, Inc.
Fountain Inn, South Carolina

Hours Mon–Fri, 9:00 AM – 5:00 PM ET

Serving Greenhouse & nursery growers, USA